156 resultados para Penetration of distributed eneration
Resumo:
A total of 991 Trypanosoma cruzi cells, from four laboratory stocks, including the three differentiation forms, had their cellular outlines, nuclei and kinetoplasts measured at 9000 x magnification. Data on the identifiable cell cycle stages were used to search for intraspecific and biological cycle heterogeneity.Cellular areas (CA) in the interphasic differentiation forms produced ratios of 1.07 for culture epimastigotes (E), 1 for blood trypomastigotes (T), and 0.86 for tissue forms (A). Homogeneity in terms of nuclear (NA) and kinetoplast (KA) areas prevailed among the stocks, with differences of at most 6%, for modal NA of strains CL and Y. NA of T-form was larger than the basic NA of early G1 A-form. T-form kinetoplast volume was 3-fold that of A-form K-DNA nucleoids.One of the two recently divided kinetoplasts in mitotic E-form did not correlate with CA, indicating that mitochondrial division was unequal. The KA of CL strain T-form did not correlate with NA, suggesting a mitochondrial disfunction in this thermosensitive strain.The CL strain T-form was more heterogeneous than the Y strain for all characters, showing greater frequency of large values, even reaching the G2 levels. This heterogeneity was interpreted as functional, consequent to the thermosensitivity of the CL strain. Precocious bursting of CL strain host cells would lead to the polymorphic T-forms. Post-S phase trypomastigotes could start division soon after penetration of host cells.
Resumo:
Aim To evaluate the reactivity of different endodontic materials and sealers with glucose and to asses the reliability of the glucose leakage model in measuring penetration of glucose through these materials.Methodology Ten uniform discs (radius 5 mm, thickness 2 mm) were made of each of the following materials: Portland cement, MTA (grey and white), sealer 26, calcium sulphate, calcium hydroxide [Ca(OH)(2)], AH26,Epiphany, Resilon, gutta-percha and dentine. After storing the discs for 1 week at 37 degrees C and humid conditions, they were immersed in 0.2 mg mL(-1) glucose solution in a test tube. The concentration of glucose was evaluated using an enzymatic reaction after 1 week. Statistical analysis was performed with the ANOVA and Dunnett tests at a significant level of P < 0.05.Results Portland cement, MTA, Ca(OH)(2) and sealer 26 reduced the concentration in the test tube of glucose significantly after 1 week (P < 0.05). Calcium sulphate reduced the concentration of glucose, but the difference in concentrations was not significant (P = 0.054).Conclusions Portland cement, MTA, Ca(OH)(2) and sealer 26 react with a 0.2 mg mL(-1) glucose solution. Therefore, these materials should not be evaluated for sealing ability with the glucose leakage model.
Resumo:
The seasonal evolution of daily and hourly values of global and diffuse solar radiation at the surface are compared for the cities of São Paulo and Botucatu, both located in Southeast Brazil and representative of urban and rural areas, respectively. The comparisons are based on measurements of global and diffuse solar irradiance carried out at the surface during a six year simultaneous period in these two cities. Despite the similar latitude and altitude, the seasonal evolution of daily values indicate that São Paulo receives, during clear sky days, 7.8% less global irradiance in August and 5.1% less in June than Botucatu. on the other hand, São Paulo receives, during clear sky days, 3.6% more diffuse irradiance in August and 15.6% more in June than Botucatu. The seasonal variation of the diurnal cycle confirms these differences and indicates that they are more pronounced during the afternoon. The regional differences are related to the distance from the Atlantic Ocean, systematic penetration of the sea breeze and daytime evolution of the particulate matter in São Paulo. An important mechanism controlling the spatial distribution of solar radiation, on a regional scale, is the sea breeze penetration in São Paulo, bringing moisture and maritime aerosol that in turn further increases the solar radiation scattering due to pollution and further reduces the intensity of the direct component of solar radiation at the surface. Surprisingly, under clear sky conditions the atmospheric attenuation of solar radiation in Botucatu during winter - the biomass burning period due to the sugar cane harvest - is equivalent to that at São Paulo City, indicating that the contamination during sugar cane harvest in Southeast Brazil has a large impact in the solar radiation field at the surface.
Resumo:
It was verified the penetration of phosphoric acid into 3 commercial calcium hydroxide-based cements (Life, Renew and Prisma VLC Dycal). The colorimetric method employed permitted the identidication of phosphorus amount in representative samples of 6 successive layers 0.1 mm thick of each material. The acid etching used were the commercial products Scotchbond Etching Gel--3M at 36.114% by weight and Solução Condicionadora--Johnson & Johnson at 36.054% by weight. The contact time was 60 seconds. The result showed that layers 0.1 mm tick for Life and Prisma VLC Dycal and 0.2 mm thick for Renew were able to block the penetration of phosphoric acid solution whereas layers 0.1 mm thick for the 3 cements were able to block the penetration of phosphoric acid gel.
Resumo:
Heavy metal oxide (HMO) glasses have received special attention due to their optical, electrical and magnetic properties. The problem with these glasses is their corrosive nature. In this work, three ceramic crucibles (Al 2O 3, SnO 2 and ZrO 2) were tested in the melting of the system 40 PbO-35 BiO 1.5-25 GaO 1.5 (cation-%). After glass melting, crucibles were transversally cut and analyzed by scanning electronic microscopy (SEM), coupled to microanalysis by energy dispersive spectroscopy (EDS). Results indicated that zirconia crucibles presented the highest corrosion, probably due to its smallest grain size. Tin oxide crucibles presented a low corrosion with small penetration of the glass into the crucible. This way, these crucibles are an interesting alternative to melt corrosive glasses in instead of gold or platinum crucibles. It is important to emphasize the lower cost of tin oxide crucibles, compared to gold or platinum ones.
Resumo:
A quite common problem in the recovery of degraded areas in the mineral exploration understands the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is: increase of the mechanical resistance to the penetration of the rooats, reduction of the aeration, alteration of the water flow and heat. Thus the present work had the basic objective of diagnosing the compaction of a degraded area by mining in a space way, through the mechanical resistance the way penetration to guide a future subsoiling in the place seeking recovery. Through the studies it was concluded that the kriging method in agreement with the space variation allows the division of the area studies in sub areas facilitating a future work to reduce cost and unnecessary interference to the atmosphere. The method was shown quite appropriate and it can be used in diagnosis of the compaction in a degraded area by mining, foreseeing subsoiling need.
Resumo:
In the Research and Teaching Farm of the State University of São Paulo (UNESP) - Campus of Ilha Solteira, located in Selviria, in Mato Grosso do Sul State, a study was conducted with the objective of investigating the resistance to penetration of a highly degraded soil due to construction of a Hydroelectric Power Plant. The experimental design was a completely randomized, with five treatments and five replications. The treatments were constituted of the following uses and managements: area in advanced state of degradation; area under regeneration cultivated 13 years with Pinus; area under regeneration cultivated 11 years with green manure and pasture; degraded area with natural regeneration; and area with natural vegetation (savanna). The system where the area was under regeneration with Pinus cultivation and the niches with natural regeneration were the closest to natural condition (savanna). Except for the natural area (savanna), all others presented a higher resistance to penetration in the layer of 0.20-0.40 m, which represents serious limitations for growth of plant roots.
Resumo:
Due to great difficulty of penetration of drugs through skin, different organized systems, such as liposomes, have been studied in order to increase percutaneous penetration. The aims of this work were to obtain and characterize small unilamellar liposomes containing caffeine (CAF). Liposomes composed by soy phosphatidylcholine - PS (40 mM) or hydrogenated PS - PSH (40 mM), with and without cholesterol - CHO (6 mM) and CAF (30 mg/mL), were characterized by size distribution, determination of mean diameter and encapsulation efficiency. Uniform size distribution with low polidispersity was observed. The mean of diameters obtained were: PS/CHO (64 nm), PS (80 nm), PSH/CHO (85 nm), PS/CAF (145 nm), PS/CHO/CAF (147 nm), PSH/CHO/CAF (152 nm), PSH (166 nm) and PSH/CAF (481 nm). The obtained encapsulation efficiency was 10.84% for PSH/CHO/CAF, followed by PS/CHO (6.61%), PSH/CAF (3.07%) and PS/CAF (1.57%).
Resumo:
This article presents a support on the remote interaction for utilization in augmented reality systems based on ARToolkit. It utilizes the multicast communication in order to improve the scalability of distributed environment. This support may be utilized in production of specific applications pointed to distance education, training and entertainment. The validity of support happened with the implementation of a prototype and realization of tests for communication latency analysis and frames per second rate. © 2007 IEEE.
Resumo:
Taking benefit of the new Galileo ranging signals, the ENCORE (Enhanced Code Galileo Receiver) project aims to develop a low-cost Land Management Application to cover needs of the Brazilian market in terms of geo-referencing and rural/urban cadastre, using a low-cost Enhanced Galileo Code Receiver as baseline. Land management applications require precision and accuracy levels from a few to several decimetres that are under-met with current pseudorange-based receiver and over-met with phase observations. This situation leads either to a waste of resources, or to lack of accuracy. In this project, it is proposed to fill this gap using the new possibilities of the Galileo ranging signals, in particular E5 AltBOC and E1 CBOC. This approach reduces the cost of the end-user solution, helping the rapid penetration of Galileo technology outside Europe. ©2010 IEEE.
Resumo:
The Brazilian National Electricity Conservation Program - PROCEL - runs regular surveys in the electric-energy-consumption market. These studies are used as valuable data to better plan the actions of this program. These data also evaluate the program's performance by identifying the level of penetration of the most efficient electric equipment within the residential sector. PROCEL's main lines of action is to promote and make available the most efficient technologies. Based on the results from the latest survey, it is estimated that 24% of the electric-energy consumption of the residential sector is used by electric shower devices, which instantaneously heat the water that flows through them, normally using an electric resistance of 5 kW. These are an important factor in a country where electric-heating devices are present in about 73% of Brazilian households. Keeping that in mind, the purpose of this work is to present the main results of the Brazilian Solar-Water-Heating-Systems Evaluation, finished in 2010, where 535 installations were visited and more than 50 researchers from different universities participated in the project. Moreover, seven Brazilian cities were selected to be studied. The information was collected from field research and statistically treated. The collected information focused on the adequacy of the project to the household, installation, operation and life cycle of the systems, as well as the users' satisfaction level. Technical questionnaires were developed to summarize all the required information, such as a Web site designed to organize and manage the data collected and a Matlab application that performed the dimensioning and F-chart systems evaluation. Quality indicators were created through a full system monitoring, with thermographic analysis and evaluation of shading influence at the system's efficiency, using the Ecotect software.
Resumo:
Apomixis and polyploidy have been important in the evolution of the angiosperms, and sporophytic apomixis has been associated with polyembryony and polyploidy in tropical floras. We studied the occurrence of polyembryony in populations of tetraploid Anemopaegma acutifolium, A.arvense and A.glaucum from the Brazilian cerrados, and histological features of sexual and apomictic processes were investigated in A.acutifolium. All populations and species were polyembryonic (68.9-98.4% of seeds). Normal double fertilization occurred in most ovules, with exceptions being that 3% of ovules were penetrated but not fertilized and in 4% of ovules both synergids were penetrated. The penetration of both synergids suggests a continuous attraction of pollen tubes and polyspermy. Adventitious embryo precursor cells (AEPs) arose from nucellar and integumental cells of the ovule in pollinated and unpollinated A.acutifolium, indicating sporophytic apomixis. However, further embryo and endosperm development required pollination and fertilization. This pseudogamy also allows concurrent sexual embryo development. Similar polyembryony rates and polyploidy indicated that A.arvense and A.glaucum are also apomictic, forming an agamic complex similar to that observed for some species of confamilial, but not closely related Handroanthus. The co-occurrence of apomixis and polyploidy in different groups of Bignoniaceae indicates homoplasious origin of these agamic complexes. © 2013 The Linnean Society of London.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS