Soil microbial biomass after two years of the consecutive application of composted tannery sludge

Because the agricultural use of tannery sludge may cause increased risks to soils, composting is recognized as one of the most suitable alternative for tannery sludge recycling. Experiments were conducted under field conditions to evaluate the effects of composted tannery sludge (CTS) on the soil microbial biomass and trace elements after two years of consecutive applications. The following five treatments were used: 0 (without CTS application), 5, 10, 20 and 40 ton ha-1 of CTS (dry basis). Soil samples were collected at 60 days after the CTS application at 0-20 cm depth. The CTS application promoted changes in the soil microbial biomass C (SMB-C) and N (SMB-N). In the first year, significant increases in the SMB-C and SMB-N were observed with the application of 10 ton ha-1. Furthermore, CTS application increased the Cr content in the soil after two years of application.

Microbial populations and activities of mangrove, restinga and Atlantic forest soils from Cardoso Island, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Soil microbial biomass after three-year consecutive composted tannery sludge amendment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Humic fractions of forest, pasture and maize crop soils resulting from microbial activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Glicerina bruta associada a aditivos na alimentação de bovinos de corte

Pós-graduação em Zootecnia - FCAV

Soil microbial properties after 5 years of consecutive amendment with composted tannery sludge

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Oral microbial colonization in children with sickle cell anaemia under long-term prophylaxis with penicillin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Beneficial effects of fermented vegetal beverages on human gastrointestinal microbial ecosystem in a simulator

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potentiated Electron Transference in alpha-Ag2WO4 Microcrystals with Ag Nanofilaments as Microbial Agent

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The effect of lipid sources on intake, rumen fermentation parameters and microbial protein synthesis in Nellore steers supplemented with glycerol

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prebiotic Effect of Fructooligosaccharide in the Simulator of the Human Intestinal Microbial Ecosystem (SHIME (R) Model)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and mechanical characterization of a recycled polypropylene and wood flour without additives

Recycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.

Trimming and washing poultry carcass to reduce microbial contamination: A comparative study

The objective of this study was to compare the efficiency of washing and trimming broiler carcasses to reduce bacterial contamination. At the poste-visceration site, 100 broiler carcasses were collected during 4 visits to a slaughterhouse in Santa Catarina State, Brazil. Birds were from the same flock, age, and approximately 2.4 kg of weight. Groups were as follows: group 1, with fecal contamination; group 2, without fecal contamination; group 3, with fecal contamination and trimmed; group 4, with fecal contamination and washed; group 5, with fecal contamination, and washed and trimmed. Carcass washings were performed with at least 1.5 L/bird of potable water (0.5 to 1 mg/kg of residual chlorine) at room temperature (20-25 degrees C) using spray cabinets with 44 spray nozzles distributed into 2 chambers (pressure of 2 kgf/cm(2) and 4 kgf/cm(2)). Washed carcasses (trimmed or not) showed significantly (P < 0.05) lower counts of aerobic mesophiles (plate count agar) on the third evaluation, and even lower (P < 0.01) counts for total coliforms (CT) and fecal coliforms (Escherichia coli). Trimmed carcasses showed significantly lower counts (P < 0.05) for plate count agar; however, we observed higher counts for E. coli (P < 0.05). The association of both treatments (washing and trimming) showed significantly higher (P < 0.05) counts for coliforms (CT and E. coli). We can conclude that the washing method is overall more efficient than the trimming method to decontaminate chicken carcasses at the postevisceration site. Hopefully, our findings can help poultry companies to minimize production costs by applying the washing method for carcass decontamination.

Biotratamento de sacolas plásticas de supermercado

Supermarket plastic bags are produced by high density polyethylene (HDPE) and low density polyethylene (LDPE) resins. In Brazil, are produced annually around 150 plastic bags per capita. Disposed in landfills, the supermarket plastic bags prevent the passage of water by slowing the breakdown of biodegradable materials and hindering compaction of waste, according to their low degradability. This work investigated the biodegradation of PE bags containing additive oxo-biodegradable and bags without additives: buried in soil columns, exposed in a controlled environment and exposed to air. The analysis methods used to assess the changes brought in the bags with respect to microbial action and exposure time were weight loss, thickness measurement, infrared (FTIR), scanning electron microscopy (SEM) and contact angle. The results showed that the use of prodegradant agents such as oxobiodegradable additives in polyethylene bags, buried in soil for 270 days, was not efficient to accelerate the biodegradation by microorganisms. It seems that these additives have been more efficient to degrade the colored pigmentation of printed bags, under the influence of light and heat.

Analysis of a microbial community associated with polychlorinated biphenyl degradation in anaerobic batch reactors

The degradation of polychlorinated biphenyls (PCBs) was investigated under fermentativemethanogenic conditions for up to 60 days in the presence of anaerobic biomass from a full-scale UASB reactor. The low methane yields in the PCBs-spiked batch reactors suggested that the biomass had an inhibitory effect on the methanogenic community. Reactors containing PCBs and co-substrates (ethanol/ sodium formate) exhibited substantial PCB reductions from 0.7 to 0.2 mg mL-1 . For the Bacteria domain, the PCBs-spiked reactors were grouped with the PCB-free reactors with a similarity of 55 %, which suggested the selection of a specific population in the presence of PCBs. Three genera of bacteria were found exclusively in the PCB-spiked reactors and were identified using pyrosequencing analysis, Sedimentibacter, Tissierela and Fusibacter. Interestingly, the Sedimentibacter, which was previously correlated with the reductive dechlorination of PCBs, had the highest relative abundance in the RCS-PCB (7.4 %) and RCS-PCB-PF (12.4 %) reactors. Thus, the anaerobic sludge from the UASB reactor contains bacteria from the Firmicutes phylum that are capable of degrading PCBs.