Fatores que afetam a oviposição de Bemisia tabaci (Genn.) biótipo B (Hemiptera: Aleyrodidae) em tomateiro

The aim of the present work was to determine the oviposition preference of the silverleaf whitefly on tomato (Lycopersicon esculentum). Preferred plant age and leaflet position on the plant were studied and the number of adults per plant necessary for selecting hosts was determined. Bruna VFN hybrid plants at different ages (30-, 45- and 60-days old) were offered to adult whiteflies in free choice test and 30-day old plants in no-choice test. Leaves were collected from upper and lower part of the plant; the leaflets were divided into three categories: basis (those near the steam of plant), middle and apex (terminal leaflet). The 30-day old plants were more preferred for oviposition in free choice test. In the upper part of the plant, whitefly adults preferred to oviposit on the leaflets at the apex and the middle of the leaves. However, in the lower part of the plant, the basal leaflets were preferred in relation to middle and apex. The densities of 100 or 150 adults per tomato plant were considered adequate for genotypes screening, using no-choice test.

Genetic control of fruit-setting percentage of tomatoes tolerant to high temperatures

The aim of present work was to study, through means and variances of generations, the genetic control of fruit-set percentage in tomatoes, in a biparental cross between line Jab-95 (resistant to fruit-set) and 'Caribe' cultivar (susceptible to fruit-set) after being subjected to high temperatures. F1, F2, and backcross generations for both parents (P 1, P2) were produced in a greenhouse at FCAVUNESP, Jaboticabal-SP, Brazil. A randomized complete block experimental design with four replications was used to evaluate the different generations. Estimates of genetic parameters were obtained according to Mather and Jinks (1982). An additive-dominant model was fitted to explain the variation observed. The mean degree of dominance (0.54), indicated incomplete dominance in the direction of increasing fruit-set percentage at high temperatures. The genetic control of fruit-set percentage, at high temperatures, for tomato was found to be oligogenic or polygenic (3.54 genes). The heritability in a limited sense was 83.91%, suggesting that the selection of individuals based on the characteristic evaluated can be efficient.

Non-nutrient heavy metals in tomato plants cultivated in soil amended with biosolid and sugar-cane bagasse compost

In this study, non-nutrient heavy metal concentrations (Cd, Cr, Ni and Pb) were measured in composts during the composting process, in compost/Red-yellow Latosol mixtures, and in tomato plants. Composts were produced using sugar-cane bagasse, biosolids and cattle manure in the proportions 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 or 0-100-0 (composts with 0, 12.5, 25, 50 and 100% biosolids). The composts were applied to the soil, in 6 treatments and a control (mineral fertilization). Control and the 0% biosolids treatments received inorganic nitrogen and all the treatments received the same amount of N, P and K. Tomato plants were cultivated in 24-L pots, in a green house in Jaboticabal, SP, Brazil. The experiment had a split plot design, in randomized blocks. Cadmium, Cr, Ni and Pb concentrations were determined during the composting process (7, 27, 57, 97 and 127 days after compost mounting), in soil (0 and 164 days after mixing) and plants. The samples were subjected to digestion with HNO 3, H2O2 and HCl and the metals were determined by AAS. Negative correlations were observed between Cd, Cr and Pb in the compost and Cd, Cr and Pb plant uptake, as well as Ni in the compost and Ni concentration in the plants. The concentrations of Cd, Cr, Ni and Pb increased during composting. Only Cd levels increased when compost was applied to the soil. The roots accumulated Cr, Ni and Pb, the stems and leaves, Cd and Ni and the fruits did not accumulate any of the metals studied. The composts with biosolids did not increase Cd, Cr, Ni and Pb uptake by plants.

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

QTL identification for tolerance to fruit set in tomato by FAFLP markers

This study aimed to detect quantitative trait loci (QTL) by fALP (Fluorescent Amplified Fragment Length Polymorphism) markers associated to the trait tomato fruit set at high temperatures. A biparental cross between line Jab-95 (heat-tolerant) and cultivar Caribe (heat-susceptible) was made. A total of 192 plants of the F2 generation were evaluated, generating 172 polymorphic markers through six primer combinations previously identified by the Bulked Segregant Analysis technique. To construct the genetic map, 106 of the 172 markers that segregated in the expected Mendelian segregation proportion (3:1) were used. The map covered 1191.46 cM of the genome. Six trait-linked QTL were identified in the analysis of simple markers and three others by the interval-mapping methodology. These results could be highly useful in improvement programs, since heat-tolerant plants can be selected rapidly, which improves tomato fruit set.

Carotenoid composition of Brazilian fruits and vegetables

Brazil has a wide diversity of food sources of carotenoids. The updated Brazilian database consists of more than 270 items of fruits, vegetables and their prepared and processed products. The database demonstrates variations due to variety, maturity, production technique, climate and processing. Many of these foods are not found in the US and European databases. Good to rich sources (>20 μg/g) of β-carotene are: acerola, bocaiúva, mango 'Extreme' and tucumã. Sources of both α-carotene and β-carotene are buriti, carrot, Cucurbita moschata 'Menina Brasileira', 'Baianinha' and 'Goianinha', and red palm oil. Commercially produced and uncultivated or semi-cultivated leafy vegetables, C. maxima 'Jerimum Caboclo' and the hybrid Tetsukabuto, cooked broccoli are sources of lutein and β-carotene. The edible Tropaeolum majus flower is especially rich in lutein. Although many fruits have β-cryptoxanthin as principal carotenoid (e.g. caja, nectarine, peach, orange-fleshed papaya, tree tomato), the levels are below 20 μg/g. Good to rich sources of lycopene are guava and guava products, papaya, pitanga and pitanga juice, tomato and tomato products, and watermelon. Sources of zeaxanthin are rare; although the principal carotenoid of piqui, the amount is low, lower than that found in buriti.

High temperature tolerance of determinate tomatoes in Brazil

The experiment was conducted in the experimental area belonging to the Section of Crop Production and Aromatic Medicinal Plants of the FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Tolerance to high temperature was studied in six determinate genotypes of tomato (Lycopersicon esculentum L.): Agrocica 8, Apex 1000, Botu-13, Calmech VFAS, Nemadoro and Jab-2, which were cultivated in a greenhouse at temperatures above 33oC for at least 2 h/day during blooming. The objectives of the study were to identify the genetic diversity of the genotypes studied and to determine their performance associated with tolerance to high temperature. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. A random block design was utilized with six treatments and with three replications. Two similarity groups were identified: 1 - Apex 1000, Botu-13, Calmech VFAS, Jab-2, Nemadoro and 2 - Agrocica 8. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficiency future breeding efforts.

Resistance of rose rootstocks to Meloidogyne hapla nematode

Roses are widely used in landscaping. One of the most important fitossanitary problems of this ornamental plant in gardens is the fitonematodes, especially Meloidogyne hapla, which is the most important one in colder climate regions. This work had the objective of study the resistance of nine rose rootstocks (Rosa multiflora 'Paulista', R. multiflora 'Japanese', R. multiflora 'Iowa', R. multiflora 'Kopman's', R. indica × multiflora, R. indica 'Mayor', R. sp. 'Natual Brier', R. manetti and R. canina 'Inermis') to Meloidogyne hapla nematode. Ten replications of each rootstock were used. The roots, collected in a commercial area of cut roses, visually had galls there were isolated and identified. The inoculum of M. hapla was previously produced in rose and tomatoes seedlings under greenhouse conditions. The plants were harvested ninety days after inoculation. The roots were washed and the number of eggs and juveniles recuperated in the root system of each plant was estimated by the Final Population (FP), and the Reproductive Factor (RF) was calculated. The rootstocks with RF<1 values were considered resistant, and the ones with RF>1, susceptible. Rosa manetti and Rosa sp. 'Natual Brier' rootstocks showed the lowest values for RF, indicating that, although they are susceptible, they provide the lowest nematode reproduction. Based on the RF values, it was concluded that all the rose rootstocks evaluated were susceptible to M. hapla nematode.

Improving the affinity of tomato grafted on Solanum torvum using an intermediate rootstock

Most of the interspecific rootstocks (Lycopersicum esculentum × L. hirsutum) used in grafted Spanish tomato crops are resistant to Meloidogyne nematodes, but the 'Mi' resistance gene does not work well at high soil temperatures. Ralstonia solanacearum is a bacterial disease usual in tropical areas, but recently identified with low incidence in several European countries. This disease could be controlled by grafting tomato on Solanum torvum, which is also resistant to Meloidogyne. However, S. torvum and tomato have low grafting affinity, which could be improved using an intermediate rootstock. Some cultivars of eggplant have a relatively good affinity with tomato and complete affinity with S. torvum. In this study we compared two tomato cultivars (one resistant to Verticillium dalihae, Fusarium oxysporum v. lycopersici race 2 and Meloidogyne spp., and one non-resistant) grafted onto 'Beaufort' (Lycopersicum esculentum × L. hirsutum), 'Torvum Vigor' (Solanum torvum) and also with an intermediate grafting of eggplant ('Cristal') between tomato and S. torvum, with nongrafted plants as controls. This arrangement was carried out in two cropping cycles (winter-spring and summer-autumn). In both cycles, plants grafted onto S. torvum, both single or double grafted, yielded less than those grafted onto 'Beaufort' or nongrafted plants. In the spring cycle, no differences were found between single and double-grafted plants using S. torvum rootstocks, but in the autumn cycle double grafted plants had higher yields than the single grafted plants. The severity of nematode infections, in terms of reducing yields, and/or hypothetical infections of Ralstonia, will determine the utility of this technique in tomato production.

EFFECT OF DIFFERENT ROOTSTOCKS ON GROWTH, CHLOROPHYLL A FLUORESCENCE AND MINERAL COMPOSITION OF TWO GRAFTED SCIONS OF TOMATO

Two tomato scions (cvs. 'Raf' and 'Gorety') were grafted on three different rootstocks: S. torvum, 'Beaufort' (Lycopersicum esculentum × Lycopersicum hirsutum) and intermediate grafting of eggplant 'Cristal' between tomato and S. torvum (double graft). Plants were grown in Mediterranean greenhouse conditions. The response to grafting was measured through growth parameters, Fv/Fm and leaf macronutrients analysis, and it was compared with non-grafted plants. The scions grafted on S. torvum in simple and double graft showed lower fresh and dry weight of leaves, number of commercial fruits, plant height, Fv/Fm and decreased their capacity to absorb several nutrients resulting in a lower mineral concentration in scions leaves, as a result of a thickened graft union. On the other hand, both scions showed a good response when grafted on the rootstock 'Beaufort', with which growth parameters, yield and photosynthetic capacity were similar to non-grafted plants. © 2013 Copyright Taylor and Francis Group, LLC.

Índice de área foliar e produtividade do tomate sob condições de ambiente protegido

The tomato cultivation in the greenhouse has been expanded in the last years, mainly, in the South and Southeast regions of Brazil, whose purpose is to improve the productivity and the quality of the agricultural products, offering regularity in the production. The present study aimed to determine, along the crop cycle, the relationship between the leaf area index and the productivity, and at the end of the cycle, the components of production of the tomato in the greenhouse. The models were generated through polynomial equations of 1st and 2nd order, having as independent variable the number of days after the transplanting. It was verified that it is possible to determine, in the greenhouse, through mathematical models, the leaf area index of the tomato crop considering the days after the transplanting. Basing on values of leaf area index, the productivity of the crop and the period of the maximum productivity can be determined, aiding the farmers to determine the best sowing and transplanting time of the tomato crop.

Indices of competition and bio-agroeconomic efficiency of lettuce and tomato intercrops in greenhouses

Intercropping is a cropping system for the production of greenhouse vegetables. It uses space more efficiently, thus reducing the cost of production. Intercropping tomato and lettuce has not been studied, but knowledge of the competitive and agroeconomic indices of these vegetables can help in the management of the intercropping system. The objectives of this study were to assess, through biological and agroeconomic indices, the competition between species and the profitability of intercropping tomato and lettuce at different times of transplantation over two growing seasons (autumn-winter and summer-winter) in greenhouse conditions. In autumn-winter, two experiments were conducted with a randomised complete-block design and five replicates. Tomato and lettuce were the main crops in the individual experiments. Treatments were arranged in a factorial of two cropping systems (intercropping and individual crops) with four transplants of the secondary crop (0, 10, 20 and 30 days after) plus an additional treatment (individual main crop). These two experiments were repeated in summer-winter. Tomato was the dominant crop regardless of transplant order. Intercropping systems established with transplants of both species on the same day had higher values of indices of competition and bio-agroeconomic efficiency than systems with longer periods of transplants between main and secondary crops. The intercropping of lettuce and tomato in greenhouses, regardless of transplant time or order, had bio-agroeconomic advantages over individual crops. The transplantation of tomato after lettuce is recommended for greater profitability.

Efeito α-tomatina na proliferação celular, apoptose e expressão de RNAm dos genes APC, Ciclina A2, Catenina, CASP9, BAK, BAX e BCL-XL em células HT29

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)