Caracterização morfológica de embriões por imagens de raios x e relação com a massa e a qualidade fisiológica de sementes de Tecoma stans L. Juss. ex Kunth (Bignoniaceae)

As imagens obtidas pelos raios X vêm sendo utilizadas na análise da qualidade de sementes desde os anos 50 e, atualmente, vêm se destacando por ser um método rápido, de boa precisão e não destrutivo. Deste modo, o presente trabalho foi realizado com o objetivo de avaliar as características morfológicas dos embriões de sementes de Tecoma stans L. Juss. ex Kunth pertencentes a diferentes classes de massa através da análise de imagens obtidas pelo uso dos raios X, correlacionando-as com a germinação e morfologia das plântulas. Foram utilizadas sete classes de massa com trinta sementes em cada classe, que foram submetidas aos raios X para a obtenção das imagens dos embriões. Os embriões, de cada uma das classes, foram separados de acordo com suas características morfológicas em 4 categorias (embriões sem defeito, embriões com pequenos defeitos, embriões deformados e sementes sem embrião). As sementes das diferentes classes de massa foram colocadas para germinar (emissão da raiz primária) e após dez dias foi observado o número de plântulas normais em cada uma das categorias e classes de massa. A maioria das sementes das classes 1 e 2, mais leves, apresenta-se com embriões deformados ou sem embrião, enquanto que as de maior massa (classes 3 a 7) apresentam embriões sem defeitos, em sua maioria ou totalidade. Quase a totalidade das sementes com embriões sem defeito germina, porém, nem todas dão origem a plântulas normais.

Aplicação do teste de raios x no estudo da morfologia interna e da qualidade fisiológica de aquênios de arnica (Lychnophora pinaster Mart.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Viability of recently harvested and stored Xylopia aromatica (Lam.) Mart. (Annonaceae) seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do cetoprofeno na consolidação óssea de ulnas osteotomizadas de coelhos: estudo qualitativo e quantitativo através de programas computacionais

OBJETIVO: Acompanhar o processo de consolidação óssea de ulnas osteotomizadas de coelhos tratados com cetoprofeno, por meio de programas computacionais. MÉTODOS: Os coelhos foram submetidos a osteotomia da ulna e divididos em dois grupos. No grupo A (n=10) os animais foram tratados com cetoprofeno (2mg.kg-1) durante cinco dias. O grupo B (n=5) serviu como controle. Os animais foram radiografados um dia após a operação e a cada 7 dias até perfazer 28 dias. No ato da tomada radiográfica, junto à região a ser estudada, foram colocadas uma escada e uma cunha de alumínio que serviram como referencial de densidade óptica. As imagens radiográficas foram digitalizadas através de um scanner. O programa ODR forneceu imagens tridimensionais e coloridas. Outro programa, CROMOX, avaliou a densidade mineral óssea da região da ostetotomia. RESULTADOS: As imagens fornecidas pelo ODR proporcionaram melhor visualização da lesão e do processo de consolidação óssea. O programa CROMOX forneceu uma análise quantitativa ao calcular a densidade mineral do calo ósseo formado ao longo dos 28 dias de observação. Não houve diferença estatisticamente significante entre os valores de densidade mineral óssea das ulnas osteotomizadas dos coelhos tratados com cetoprofeno e do grupo controle, nas radiografias realizadas ao longo de 28 dias de pós-operatório. CONCLUSÃO: O cetoprofeno não interferiu no processo de formação do calo ósseo de ulnas osteotomizadas de coelhos.

Histologic study of use of microfibrillar collagen hemostat in rat dental sockets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção antecipada de mudas de videira Rubi (Vitis vinifera) através de enxertia verde

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de programa de análise de imagens na interpretação de fotomicrografias de alta resolução de argilominerais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Some segmental structural features of the aortic wall of domestic chicken (Gallus domesticus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DUCTAL CARCINOMA IN-SITU OF THE BREAST - HISTOLOGIC CATEGORIZATION AND ITS RELATIONSHIP TO PLOIDY AND IMMUNOHISTOCHEMICAL EXPRESSION OF HORMONE RECEPTORS, P53, AND C-ERBB-2 PROTEIN

Background. Ductal carcinoma in situ (DCIS) of the breast has been diagnosed increasingly since the advent of mammography. However, the natural history of these lesions remains uncertain. Ductal carcinoma in situ of the breast does not represent a single entity but a heterogeneous group with histologic and clinical differences. The histologic subtype of DCIS seems to have an influence on its biologic behavior, but there are few studies correlating subtype with biologic markers.Methods. The authors studied a consecutive series of 40 cases of DCIS and after its histologic categorization verified its relationship with ploidy using image analysis and analyzing estrogen receptor (ER), progesterone receptor (PR), p53 and c-erbB-2 expression using immunohistochemistry.Results. The three groups proposed according to the grade of malignancy were correlated significantly with some of the additional parameters studied, including aneuploidy and c-erB-2 expression. Aneuploidy was detected in 77.5% of cases of DCIS mainly in high and intermediate grade subtypes (100% and 80% vs. 35.7% in low grade) whereas immunoreactivity for c-erbB-2 was detected in 45% of cases of DCIS mainly in the high grade group. Expression of ER and PR were observed frequently in this study (63.9% and 65.7% respectively), but without correlation with the histologic subtype of DCIS, although we found a somewhat significant association between high grade DCIS and lack of ER. p53 protein expression was detected in 36.8% of these cases, but no relationship between this expression and histologic subtype or grading of DCIS was found.Conclusions. These results provide further evidence for the morphologic and biologic heterogeneity of DCIS. Besides histologic classification and nuclear grading, some biologic markers such as aneuploidy and c-erbB-2 expression constitute additional criteria of high grade of malignancy.

Description of the gamonts of a small species of Hepatozoon sp (Apicomplexa, Hepatozoidae) found in Crotalus durissus terrificus (Serpentes, Viperidae)

A small species of the genus Hepatozoon found in a specimen of Crotalus durissus terrificus from the Botucatu region, São Paulo State, Brazil is described. The morphologic alterations induced in the snake's erythrocytes by the presence of this parasite are described. Morphology and morphometric analyses were performed using the Qwin Lite 2.5 computerized image analysis system (Leica). The Hepatozoon possessed a small and short body (8.1+/-0.5 mum long and 3.8+/-0.4 mum wide), with round extremities. The cytoplasm varied from pale blue to basophilic and had no granulations. Its nucleus was large, occupied a large area of the cytoplasm, and was irregular in shape and not condensed. Despite its small size, this parasite induced important changes in the host cell. Total parasitemia observed was 56.6%.

SYSTEMATICS OF FRESH-WATER AUDOUINELLA (ACROCHAETIACEAE, RHODOPHYTA) IN NORTH-AMERICA .1. THE REDDISH SPECIES

Multivariate morphometrics and image analysis were used to determine the number of well-distinguished infrageneric taxa of reddish freshwater Audouinella in North America. Three distinct groupings were differentiated from 83 populations collected from Alaska and Labrador in the north to central Mexico and Jamaica in the south. These groupings were statistically related to seven type specimens. The following species were recognized: A. eugenea (SKUJA) JAO, A. hermannii (ROTH) DUBY [syn.: A. violacea (KUTZ.) HAMEL and its varieties, alpina (KUTZ.) RAB., dalmatica (KUTZ.) RAB., expansa (WOOD) SMITH, and hercynica (KUTZ.) KUTZ.] and A. tenella (SKUJA) PAPENFUSS. These species are separated based on dimensions of vegetative cells and monosporangia. A. tenella is found only in California, A. eugenea in warm, alkaline and high-ion waters of the tropical rainforest and desert-chaparral, while A. hermannii occurs widely from the boreal to south temperate and in waters with relatively low temperatures and ion content.

PhotoLin: a program to identify and analyze linear structures in aerial photographs, satellite images and maps

A computer program, PhotoLin, written for an IBM-PC-compatible microcomputer is described which detects linear features in aerial photographs, satellite images and topographic maps. The program accepts images saved to PCX files as input and applies noise correction and smoothing filters and thinning routines. The output consists of a skeleton containing the median lines of linear features which can be represented on a map. The branches of the skeleton can be broken into sections of constant length for which the mean orientations are obtained for the preparation of rose diagrams. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

The effect of mold temperature on castability of CPTi and Ti-6Al-4V castings into phosphate bonded investment materials

Objective. The aim of this study was to evaluate the castability of CP titanium and Ti-6Al-4V alloy castings into Rematitan Plus investment at three different mold temperatures.Methods. A nylon mesh pattern (20 mm with 64 squares and wire of 0.7 mm in diameter) was used for the castability testing. Initially, an image of the wax pattern was obtained by means of a digital camera and the total extension of filaments (mm) was then measured, using the Leica Qwin image analysis system. The mesh sprued was placed in the Rematitan Plus investment material and the castings were made in a Discovery Plasma machine at three different mold temperatures: 430 degrees C (control group), 480 degrees C or 530'C. Ten castings were made for each temperature. The images of the castings were analyzed (Leica Qwin) and the castability index determined by the number of the completely cast segments as a percentage of the wax pattern. Data were analyzed by two-way ANOVA and Tukey's multiple comparison test (a = 0.05) using materials and temperatures as discriminating variables.Results. The Ti-6Al-4V alloy (60.86%) presented a better castability index than CP Ti (48.44%) (p < 0.000001). For CP Ti, the temperature of 530 degrees C (23.96%) presented better castability than at other temperatures, 480 degrees C (14.66%) and 430 degrees C (12.54%), with no difference between them (p < 0.001). For Ti-6Al-4V alloy, there was a statistically significant difference among the three temperatures: 530 degrees C (28.36%) > 480 degrees C (19.66%) > 430 degrees C (15.97%) (p < 0.002).Significance. Within the limitations of this study, the increase in the mold temperature of the Rematitan Plus investment resulted in a better castability index for both materials, and Ti-6Al-4V presented a better castability index than CP Ti. (c) 2005 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effect of cold plasma treatment on mechanical properties of PET/PMMA composites

Mechanical strength of polyethylene terephthalate (PET) fibres and polymethyl methacrylate (PMMA) matrix composites were studied with particular interest on the effects of oxygen and argon plasma treated fibres. PET. fibres were treated in a radio frequency plasma reactor using argon or oxygen for different treatment times to increase the interface adhesion. Fibre volume fraction was measured through digital image analysis. Elastic moduli resulted between 3 GPa for untreated to 6 GPa for treated composites. Tensile tests on PET fibres showed that plasma treatment caused a decrease in average tensile strength compared to untreated fibres. Fracture analysis confirmed the increase in interfacial adhesion due to plasma treatment. (c) 2004 Elsevier Ltd. All rights reserved.

Tensile strength of radio frequency cold plasma treated PET fibers - Part 1: Influence of environment and treatment time

This article reports on a series of experiments with polyethylene terepthalate (PET) treated in a radio frequency plasma reactor using argon and oxygen as a gas fuel, for treatment times equal to 5 s, 20 s, 30 s, and 100 s. The mechanical strength modification of PET fibers, evaluated by tensile tests on monofilaments, showed that oxygen and argon plasma treatment resulted in a decrease in the average tensile strength compared with the untreated fibers. This reduction in tensile strength is more significant for argon plasma and is very sensitive to the treatment time for oxygen plasma. Scanning electron microscopy (SEM) used to analyze the effects of cold plasma treatment on fiber surfaces indicates differences in roughness profiles depending on the type of treatments, which were associated with variations in mechanical strength. Differences in the roughness profile, surveyed through an image analysis method, provided the distance of roughness interval, D-ri. This parameter represents the number of peaks contained in a unit length and was introduced to correlate fiber surface condition, before and after cold plasma treatments, and average tensile strength. Statistical analysis of experimental data, using Weibull cumulative distribution and linear representation, was performed to explain influences of treatment time and environmental effects on mechanical properties. The shape parameter, alpha, and density parameter, beta, from the Weibull distribution function were used to indicate the experimental data range and to confirm the mechanical performance obtained experimentally.