A probabilistic model for elastic-plastic fracture analysis of plane and axisymmetric structures

This work presents a methodology for elastic-plastic fracture reliability analysis of plane and axisymmetric structures. The structural reliability analysis is accomplished by means of the FORM analytical method. The virtual crack extension technique based on a direct minimization of potencial energy is utililized for the calculation of the energy release rate. Results are presented to illustrate the performance of the adopted methodology.

Fracture strength of bovine incisors after intra-radicular treatment with MTA in an experimental immature tooth model

Aim To evaluate, using an experimental immature tooth model, the fracture resistance of bovine incisors submitted to different reinforcement treatments with mineral trioxide aggregate (MTA).Methodology An immature tooth model was created by sectioning the coronal and apical portions of 40 bovine incisors 8 mm above and 12 mm below the cementoenamel junction. The root canals were irrigated with 1.0% sodium hypochlorite. They were enlarged both coronally and apically using number 703 carbide burs (ISO: 500-104-168-007-021) and their internal diameter was standardized to 2.1 mm. The specimens were assigned to four groups (n = 10): GI-control (without filling); GII-apical MTA plug + filling with gutta-percha and endodontic sealer; GIII-filling with MTA; GIV-apical MTA plug + filling with MTA + metallic post (Reforpost I). A polyether impression material was used to simulate the periodontal ligament. The specimens were submitted to a compressive load at a crosshead speed of 0.5 mm min(-1) in a servo-hydraulic universal testing machine (MTS 810) applied at 45 degrees to the long axis of the tooth until failure. Data were submitted to statistical analysis by the Kruskal-Wallis test at 5% significance level.Results GIV presented the highest fracture resistance (32.7N) and differed significantly from the other groups (P < 0.05). No statistically difference was found between GII (16.6N) and GIII (23.4N) (P > 0.05). GIII had a significantly higher fracture resistance than GI (P < 0.05).Conclusions the use of MTA + metallic post as an intra-radicular reinforcement treatment increased the resistance to fracture of weakened bovine teeth in an experimental immature tooth model.

Experimental study of progressive facial hemiatrophy: effects of cervical sympathectomy in animals

Progressive facial hemiatrophy (Romberg's syndrome) is of unknown cause and uncertain pathogenesis. The main pathogenetic hypotheses are: sympathetic system alterations, localized scleroderma, trigeminal changes, possibly of genetic origin. To test the hypothesis of sympathetic system alterations, we designed an experimental model with ablation of the superior cervical sympathetic ganglion in rabbits, cats and dogs. All the animals were operated upon when 30 days old and were examined monthly for 1 year. During this period localized alopecia, corneal ulceration, keratitis, strabismus, enophthalmos, ocular atrophy, hemifacial atrophy and slight bone atrophy on the side of the sympathectomy were observed. Thus, cervical sympathectomy reproduces in animals the principal clinical alterations of Romberg's syndrome. Our data suggest that the sympathetic system is involved in the pathogenesis of this syndrome.

Orthodromic transposition of the temporal muscle for facial paralysis: Made easy and better

The authors present a modified technique of transposition of temporal muscle for reanimation of facial paralysis. Fourteen cases illustrate the simplicity, advantages, and excellent esthetic and functional results of this method.

Repair characteristics of horizontal root fracture: a case report

Radicular fractures in permanent teeth are uncommon injuries among dental traumas, comprising 0.5-7% of the cases. Fracture occurs most often in the middle-third of the root and rarely at the apical-third. The present paper reports a clinical case of a horizontal radicular fracture located between the middle- and apical-third of a upper left-central incisor followed-up for over 3 years. The tooth was extracted owing to periodontal reasons. Histomorphologically, it showed pulp-vitality preservation and root healing by hard-tissue deposition.

Osseointegrated Implant Fracture: Causes and Treatment

Despite its high success rate, therapy with osseointegrated dental implants is not free of complications. Among the problems that may occur is fracture of implants, which, albeit a rare phenomenon, may lead to unpleasant clinical outcomes for the patient, as well as for the clinician. Thus, it is paramount to know the factors related to the biological processes involved in maintenance of osseointegration and biomechanics applied to dental implants to prevent such complications, as well as treatment options available to deal with the problem. Therefore, the objectives of this work were to investigate the literature to identify causative factors that may lead to fracture of dental implants and to discuss available procedures.

Oral-Facial-Digital Syndrome Type 1: Oral Features in 12 Patients Submitted to Clinical and Radiographic Examination

Objective: To evaluate the oral features in individuals with oral-facial-digital syndrome type 1 (OFD 1), previously diagnosed by the Genetic Sector of the Hospital of Rehabilitation of Craniofacial Anomalies of the University of São Paulo (HRAC-USP).Design: Twelve patients with OFD 1 were examined clinically and radiographically; their medical files were also evaluated.Results: Associated oral malformations were observed in all patients (100%). The most frequent findings were tongue hamartomas, multiple buccal frena, asymmetric lips, asymmetric tongue, and bilateral maxillary gingival swelling. Interestingly, atrophy of the maxillary midline frenum was also observed in all the individuals examined.Conclusions: Several extra and intraoral alterations were observed in patients with OFD 1. The authors suggest the inclusion of atrophy of the maxillary midline frenum as a commonly found characteristic of OFD 1.

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactide-co-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 mu m thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8 similar to 1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.

Determinação da relação central. Estudo sobre as posições laterais da mandíbula, em relação à linha mediana facial, em função de dois métodos para esta determinação.

The authors studied the lateral positional desviations of the mandible, in relation to the facial median line in 30 (thirty) full edentulous patients, with the purpose to verify the influence of the unstrained guided (chinpoint guidance) and deglutition methods for the determination of centric relation. According the results obtained they conclude that the unstrained guided method produced a mandibular lateral desviation with a mean value of the 0.752 mm and in the deglutition method the mean value observed was 1.109 mm. The statistical analysis of the results revealed for the unstrained guided method a proportion of the points to the right and left of the median line not statistically significant, while for the deglutition method the difference was statistically significant at a level of 5%.

Contribuição para o estudo da proção cervical da veia facial de fetos, recém-nascidos e crianças.

In the study of cervical posterior of the facial vein of the foetus, newborns and children we injected in the veins of the head and neck of 15 corpses, rubber material (Xantopren and or Neoprene Latex). The results showed than the retromandibular and or the facial vein form a venous trunk in 83.3%, what finish always in the intern jugular vein or join the retromandibular vein and casually also with a posterior auricular vein originating the extern jugular vein (16.7%).