Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work

Síntese de nanopartículas de sulfeto de cobre, preparação e estabilidade coloidal de fluidos trocadores de calor em meio aquoso

Pós-graduação em Química - IQ

Modelo distribuído aplicado à análise de evaporadores do tipo tubo aletado

Pós-graduação em Engenharia Mecânica - FEIS

Physicothermal properties of aqueous sodium chloride solutions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermoregulatory consequences of salt loading in the lizard Pogona vitticeps

Previous research has demonstrated that dehydration increases the threshold temperature for panting and decreases the thermal preference of lizards. Conversely, it is unknown whether thermoregulatory responses such as shuttling and gaping are similarly influenced. Shuttling, as an active behavioural response, is considered one of the most effective thermoregulatory behaviours, whereas gaping has been proposed to be involved in preventing brain over-heating in lizards. In this study we examined the effect of salt loading, a proxy for increased plasma osmolality, on shuttling and gaping in Pogona vitticeps. Then, we determined the upper and lower escape ambient temperatures (UETa and LETa), the percentage of time spent gaping, the metabolic rate ((V) over dot(O2)), the evaporative water loss (EWL) during gaping and non-gaping intervals and the evaporative effectiveness (EWL/(V) over dot(O2)) of gaping. All experiments were performed under isotonic (154 mmol l(-1)) and hypertonic saline injections (625, 1250 or 2500 mmol l(-1)). Only the highest concentration of hypertonic saline altered the UETa and LETa, but this effect appeared to be the result of diminishing the animal's propensity to move, instead of any direct reduction in thermoregulatory set-points. Nevertheless, the percentage of time spent gaping was proportionally reduced according to the saline concentration; (V) over dot(O2) was also decreased after salt loading. Thermographic images revealed lower head than body surface temperatures during gaping; however this difference was inhibited after salt loading. Our data suggest that EWL/(V) over dot(O2) is raised during gaping, possibly contributing to an increase in heat transfer away from the lizard, and playing a role in head or brain cooling.

Spurious transients of projection methods in microflow simulations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Graded meshes in bio-thermal problems with transmission-line modeling method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise de um trocador de calor tipo serpentina de uma planta de hipoclorito de sódio

This study aims to analyze the capacity of a helical coil heat exchanger to reach the requested heat transfer rates by a sodium hypochlorite production process. This heat exchanger was installed in an experimental way in order to reuse a source of low-temperatures water in such a way to become a more economical alternative than the existing cooling tower. Firstly, the concepts related to the theory of heat transfer applicable to the case were introduced. Then, the mapping of the main information about the production process and the technical specification of the current cooling system equipment's was realized. Using the dimensions of the heat exchanger installed today as reference, the calculations for determining the ideal length of the coil to different flows of hot fluid were performed. Finally, it was concluded that the heat exchanger currently employed does not provide heat transfer rates required for the maximum flow rate value supported by the cooling tower

Influence of summertime mesoscale convective systems on the heat balance and surface mixed layer dynamics of a large Amazonian hydroelectric reservoir

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A new approach for thermal performance calculation of cross-flow heat exchangers

A new numerical methodology for thermal performance calculation in cross-flow heat exchangers is developed. Effectiveness-number of transfer units (epsilon-NTU) data for several standard and complex flow arrangements are obtained using this methodology. The results are validated through comparison with analytical solutions for one-pass cross-flow heat exchangers with one to four rows and with approximate series solution for an unmixed-unmixed heat exchanger, obtaining in all cases very small errors. New effectiveness data for some complex configurations are provided. (c) 2005 Elsevier Ltd. All rights reserved.

Domestic microwave oven adapted for fast heat treatment of Ba0.5Sr0.5(Ti0.8Sn0.2)O-3 powders

In this work, BSTSn powders prepared by the polymeric precursor method were heat treated in a domestic microwave oven (MW) using a SiC susceptor to absorb the microwave energy and transfer the heat to the powder. The main advantage of MW is to reduce the thermal treatment time for phase crystallization. The powders were heat treated at 300 degrees C for 20 h in conventional oven, 300 degrees C for 10 min, 20 min, and 30 min in MW and at 500 degrees C for 1 min in MW. After thermal treatment, the photoluminescent properties of powders at room temperature were analyzed. (c) 2007 Published by Elsevier B.V.

Reproductive Parameters of Mangalarga Marchador Mares in a Commercial Embryo Transfer Programme

ContentsThe objective of this study is to evaluate the reproductive efficiency in donors and recipient Mangalarga Marchador mares in commercial programmes of embryo transfer (ET) and the effects of some reproductive characteristics and ET methodology on conception rates in the recipient mares. A total of 1140 flushing procedures were performed and 830 embryos (72.8%) were recovered. There were no differences between the rates of embryonic recovery in the different breeding seasons (p > 0.05) and 92.8% of the recovered embryos were 8-9 days old. There was no difference in the embryonic recovery regarding the collection order from the first to the ninth embryo collection along the breeding season, as well as among mares inseminated during the foal heat or subsequent cycles (p > 0.05). Pregnancy rates observed in the total period of all reproductive seasons at 15, 30, 45 and 60 days of pregnancy were 73.4, 69.9, 66.7 and 64.5%, respectively. Differences in pregnancy rate and early embryonic loss rates were not observed between embryos transferred immediately after collection (66.8% and 13.5%) and embryos transported at room temperature for periods of < 1 h (62.9% and 14.4%; p > 0.05). Pregnancy rates were higher when the interval between ovulations of donor and recipient mares remained between -3 and -2 days (p < 0.05), and the lowest rates were observed for intervals of -6 days (p < 0.05) with intermediary values for intervals of -1, 0 and +1 (p > 0.05). Embryonic loss rates, however, did not differ between intervals of ovulation's synchronism between donor and recipient mares (p > 0.05). This flexibilization in the ovulatory synchronism between donor and recipient mares optimizes the use of recipient mares, thus reducing costs and facilitating management of horse breeding farms.

Effects of heat stress on development, quality and survival of Bos indicus and Bos taurus embryos produced in vitro

Heat stress is an important cause of poor development and low survival rates in bovine embryos. Experiments were conducted to test the hypothesis that Bos indicus embryos are more resistant to heat stress than are Bos taurus embryos. In experiment 1, Nelore and Jersey embryos from oocyte pick-up-derived oocytes were submitted to heat stress (96 hours post-insemination, 41 °C, 6 hours), developmental ratios were assessed at Day 7 (Day 0 = day of fertilization), and blastocysts were frozen for RNA extraction. Experiment 2 evaluated expression of COX2, CDX2, HSF1, and PLAC8 in previously frozen blastocysts. In experiment 3, Nellore and Angus embryos from oocyte pick-up-derived oocytes were submitted to heat stress (96 hours post-insemination, 41 °C, 12 hours) and transferred to recipients on Day 7. In experiment 4, embryos developed as in experiment 3 were fixed for Terminal deoxynucleotidyl transferase dUTP nick end labeling labeling and total cell counting. In experiment 1, heat stress decreased the percentage of Jersey oocytes that became blastocysts, but had no effect on Nellore embryos (34.6%, 25.0%, 39.5%, and 33.0% for Jersey control, Jersey heat-stressed, Nellore control, and Nellore heat-stressed oocytes, respectively; P < 0.05). In experiment 2, heat stress decreased (P < 0.05) expression of CDX2 and PLAC8, with higher expression of these genes in Nellore embryos than in Jersey embryos. Heat stress also decreased (P < 0.05) expression of COX2 in Jersey embryos, but had no effect on Nellore embryos. Expression of HSF1 was decreased (P < 0.05) by heat stress in both breeds, with a greater effect in Nellore embryos. In experiment 3, heat stress tended (P = 0.1) to decrease the percentage of pregnancies among cows (Day 30 to 35) that received Angus embryos. In experiment 4, heat stress increased (P < 0.05) the percentage of apoptotic blastomeres, but had no breed-specific effects. In addition, Nellore embryos had fewer (P < 0.05) Terminal deoxynucleotidyl transferase dUTP nick end labeling- positive blastomeres than did Angus embryos. We concluded that the detrimental effects of heat stress were dependent upon embryo breed and were more evident in Bos taurus embryos than in Bos indicus embryos. © 2013 Elsevier Inc.

Avaliação da dinâmica temporal da evaporação no reservatório de Itumbiara, GO, utilizando dados obtidos por sensoriamento remoto

The object of this work was to study the dynamics of evaporation in the Itumbiara reservoir, located in Central Brazil, using MODIS-derived water surface temperature (product MOD11A1) and meteorological data acquired over the water surface. The evaporation rates were derived from latent heat flux, estimated through a mass transfer model. The estimates were carried out for the period between 1/1/2010 and 31/12/2010. The results showed that evaporation rate tends to increase from January to September and then decrease from September to December. The evaporation rate reached values near 20 mm day-1 in Itumbiara reservoir during the dry season in 2010. The mean evaporation rate for the wet season was 3.66 mm day-1 and 8.25 mm day-1 for the dry season. The total water volume evaporated from Itumbiara reservoir during 2010 was estimated at about 1.7 billion m³ (2,300 mm) which represents 10% of total reservoir volume. The results suggest that advection is the main transport mechanism which drives the evaporation in Itumbiara. The convective processes contribute secondarily to evaporation in Itumbiara reservoir.