Programa para gerenciamento de rebanho leiteiro

With the advent of technology, many repetitive processes before now was be simplified with the support of a simple computer. Therefore programming has been developed and new softwares appear every day. For the development of this project was used the Microsoft Visual Studio 2010, and with it the program was made in C # Windows Form mode. This work aims to develop a program that can read, send and receive data via the Universal Serial Bus (USB) to the computer, and thereby perform the processing. Thus the milk producer will possess the knowledge of the amount of milk produced by the animal. With the processing of data it is possible to generate graphs of herd production or a specific animal and you can also generate the required report date

Análise dinâmica e estrutural de virabrequim

This paper deals with static analysis and dynamic stress of an ensemble crank and crankshaft, contained within a combustion engine of 4 cylinders. Aimed to illustrate procedures for computer-aided analysis having as goal the optimization of components according to the need for the market demand. Thus, to work in static and dynamic analyzes were summarized the basic theory involved in the calculations and analyzes necessary actuation forces and held a brief introduction about the manufacturing process and forging. Subsequently, it was applied with the use of software in a case the crankshaft, to obtain the performance and structural dynamic thereof. There was a conservative result and critical points in the fillet of the crankshaft bearing, as well as for lubrication hole. It was concluded that there are possibilities for improvements in the manufacturing process and design optimization in order to provide lower criticality and a more robust part

Análise da dinâmica do uso da terra e sua interferência em enchentes na área urbana do município de Americana (SP)

Due to an intense process of population growth and urban density in Americana (SP), mainly due to the development of the local textile industry after 1970, there was, concomitant to the occupation of the margin of rivers and streams, soil sealing that increased the level of superficial runoff, triggering frequent floods. Based on the analysis of these processes we investigate the conditions of one densely urbanized area of the county, the Córrego do Parque, in three time series, 1977, 1996 and 2008. Taking as the starting the characterization and spatial distribution of landscape physiography, we prepared thematic letters and synthetic maps digital scale 1:10,000 from photointerpretation of aeroframes. The thematic maps were produced by scanning with subsequent edition using the software Auto-Cad Map. Checking the data and of geographic coordinates with GPS (Global Positioning System). Regarding land use classes, we used the description of the Soil Conservation Service (1975) which allowed us to get the Curve Number parameter, which will be used in hydrologic modeling for verification of flooding (Tucci, 1989). For the process of hydrologic modeling, we used models based on Methodology Object Oriented Modeling Applied to Water Resource Systems, Viegas Filho (1999), using the computer program called IPHS1, which uses models of the Soil Conservation Service (SCS , 2004), for conversion of rainfall-runoff and the spread of excessive rain. The results indicate that increased waterproofing generated by the change in use and occupation over the past decades promoted the increased surface runoff and drainage system overload, increasing the intensity of floods

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making

Uma proposta para utilização do computador no processo de ensino e aprendizagem dos primeiros números do sistema hindu-arábico

The aim of this work is presenting the development and the results of a research, which focus of interest has been the making of softwares that could help the process of teaching and learning of the hindu-arabic numerals system, on children in the alphabetical stage. Since the most important presupposes to this work are the development of the number concept according to Jean Piaget (1986-1980) and the reality of the classroom, then three different moments have been fixed: the creation of a beginning scheme of computer activities; the aplication of these activities on children in the alphabetical stage; and, finally, an analysis of the limits and possibilities of these activities while an environment cause of actions that would benefit the process of teaching and learning of the mentioned content. Finally, based on the anlysis of the results obtained, the next step was fixing a more consistant set of computer activities, which makes up a proposal to the use of computer in the process of teaching and learning of the first hindu-arabic numbers

Fluorescence Level of Composites Assessed by Computer Processing of Digital Images - ScanWhite

The human dentition is naturally translucent, opalescent and fluorescent. Differences between the level of fluorescence of tooth structure and restorative materials may result in distinct metameric properties and consequently perceptible disparate esthetic behavior, which impairs the esthetic result of the restorations, frustrating both patients and staff. In this study, we evaluated the level of fluorescence of different composites (Durafill in tones A2 (Du), Charisma in tones A2 (Ch), Venus in tone A2 (Ve), Opallis enamel and dentin in tones A2 (OPD and OPE), Point 4 in tones A2 (P4), Z100 in tones A2 ( Z1), Z250 in tones A2 (Z2), Te-Econom in tones A2 (TE), Tetric Ceram in tones A2 (TC), Tetric Ceram N in tones A1, A2, A4 (TN1, TN2, TN4), Four seasons enamel and dentin in tones A2 (and 4SD 4SE), Empress Direct enamel and dentin in tones A2 (EDE and EDD) and Brilliant in tones A2 (Br)). Cylindrical specimens were prepared, coded and photographed in a standardized manner with a Canon EOS digital camera (400 ISO, 2.8 aperture and 1/ 30 speed), in a dark environment under the action of UV light (25 W). The images were analyzed with the software ScanWhite©-DMC/Darwin systems. The results showed statistical differences between the groups (p < 0.05), and between these same groups and the average fluorescence of the dentition of young (18 to 25 years) and adults (40 to 45 years) taken as control. It can be concluded that: Composites Z100, Z250 (3M ESPE) and Point 4 (Kerr) do not match with the fluorescence of human dentition and the fluorescence of the materials was found to be affected by their own tone.

A nature-inspired approach to speed up optimum-path forest clustering and its application to intrusion detection in computer networks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Computer graphics applied to anatomy: a study of two bio-cad modeling methods on finite element analysis of human edentulous hemi-mandible

Modeling is a step to perform a finite element analysis. Different methods of model construction are reported in literature, as the Bio-CAD modeling. The purpose of this study was to perform a model evaluation and application using two methods of Bio-CAD modeling from human edentulous hemi-mandible on the finite element analysis. From CT scans of dried human skull was reconstructed a stereolithographic model. Two methods of modeling were performed: STL conversion approach (Model 1) associated to STL simplification and reverse engineering approach (Model 2). For finite element analysis was used the action of lateral pterygoid muscle as loading condition to assess total displacement (D), equivalent von-Mises stress (VM) and maximum principal stress (MP). Two models presented differences on the geometry regarding surface number (1834 (model 1); 282 (model 2)). Were observed differences in finite element mesh regarding element number (30428 nodes/16683 elements (model 1); 15801 nodes/8410 elements (model 2). D, VM and MP stress areas presented similar distribution in two models. The values were different regarding maximum and minimum values of D (ranging 0-0.511 mm (model 1) and 0-0.544 mm (model 2), VM stress (6.36E-04-11.4 MPa (model 1) and 2.15E-04-14.7 MPa (model 2) and MP stress (-1.43-9.14 MPa (model 1) and -1.2-11.6 MPa (model 2). From two methods of Bio-CAD modeling, the reverse engineering presented better anatomical representation compared to the STL conversion approach. The models presented differences in the finite element mesh, total displacement and stress distribution.

Evaluation of the Computer-based Battery for Oral Language (BILOv3) through the Rasch model for a Brazilian Sample

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Computer simulation of configurational properties of partially ionized polyelectrolytes

Monte Carlo simulation methods were used in order to study the conformational properties of partially ionized polyelectrolyte chains with Debye-Hückel screening in 1:1 electrolyte solution at room temperature. Configurational properties such as the distributions of probability for the square end to end distances, for the square radii of gyration and for the angles between polyion bonds were investigated as a function of the chain ionization and the salt concentration. © 1993.

Análise de desempenho de redes de comunicação wireless em aplicações de Smart Grid

Pós-graduação em Engenharia Elétrica - FEIS

Evolutionary stages of environmental management in computer companies located in Brazil: case studies

This study aims at identifying which environmental management practices computer companies located in Brazil are adopting, and classifying these companies according to the evolutionary stages of environmental management. For such, the case study research method was used at three companies. Results show that environmental management in the sector is geared towards compliance with laws and eco-efficiency, aimed at cutting costs. It was concluded that classification does not occur in a linear manner with defined borders, and that the multinational companies located in Brazil are greatly influenced by their foreign head offices, which are at more advanced evolutionary stages.