Consideracoes sobre a aplicacao da geoestatistica a dados geoquimicos.

Deals with some common problems in structural analysis when calculating the experimental semi-variogram and fitting a semi-variogram model. Geochemical data were used and the following cases were studied: regular versus irregular sampling grade, presence of 'outliers' values, skew distributions due to a high variability of the data and estimation using a kriging procedure. -from English summary

Calculo de reserva de uma jazida de carvao por metodologia geoestatistica

A coal deposit was studied at Sapopema (PR) in the upper part of the Tubarao Group. The eliptical deposit is made up by a single layer of 1.2 m mean thickness and lies at a depth of 380 to 700 m. The semi-variogram, using the spherical model, revealed a range of 1.5 km and no nugget effect. Area kriging estimation for a grid of 0.5 × 0.5 km showed a value of 50.121.750 ton, very close to the real reserve one. -from English summary

Estudo do nivel piezometrico por analise geoestatistica

160 groundwater bores in the Ribeirao Preto region were used to study the behaviour of the piezometric surface of the Botucatu Formation aquifer by geostatistical methodology. The semi-variogram showed the following results: nugget = 50 m2; sill = 450 m2 and range = 4.5 km. The piezometric surface, obtained by punctual kriging in a 100 x 100 knot grid, revealed two lowered zones: one in a southwest to north-northeastern trend, indicating the groundwater flow north toward the Rio Pardo; and the other in the central part due to the high concentration of holes in the urban region of Ribeirao Preto city. -from English summary

Abordagem quantitativa na avaliacao do deposito de carvao de cerquilho - SP

This paper deals with an integrated study concerning the evaluation of the coal deposit at Cerquilho (Sao Paulo State) in the upper part of the Tubarao Group. Palaeogeographical studies from other authors describe the genesis of these deposits as a deltaic system overlapped by a marine transgressive sequence. The study applied four methods for ore reserve estimation (isolines, blocks, polygones and triangles), besides statistical and geostatistical methodology. The technological characterization assays suggest the application for the coal in cement and ceramics industries. The applied methodology showed reserves estimated around 1 400 000 ton. The isolines method tend to underestimate the amount of coal, on the other hand, the kriging method shows a tendency to overestimate the results. The data from the polygonal method are closest to mean values. For the thickness estimation the results close to the mean values are those from the isolines. -after English summary

Modeling and identification of fertility maps using artificial neural networks

The application of agricultural fertilizers using variable rates along the field can be made through fertility maps previously elaborated or through real-time sensors. In most of the cases applies maps previously elaborated. These maps are identified from analyzes done in soil samples collected regularly (a sample for each field cell) or irregularly along the field. At the moment, mathematical interpolation methods such as nearest neighbor, local average, weighted inverse distance, contouring and kriging are used for predicting the variables involved with elaboration of fertility maps. However, some of these methods present deficiencies that can generate different fertility maps for a same data set. Moreover, such methods can generate inprecise maps to be used in precision farming. In this paper, artificial neural networks have been applied for elaboration and identification of precise fertility maps which can reduce the production costs and environmental impacts.

Hypogaeic anti epigaeic ant (Hymenoptera: Formicidae) assemblages of atlantic costal rainforest and dry mature and secondary amazon forest in Brazil: Continuums or communities

Meat, flour and sugar baits were used on the soil surface and buried to examine species composition of the ant fauna in three separate tropical forests in Brazil, and to control for the effect of the regional faunal pool. Compositional mosaic diversities were comparable among areas, bait types and foraging strata. Mosaic diversity was independent of mean assemblage size. The number of unique species per sampling unit was correlated with mean assemblage size. Canonical correspondence analysis ordered species first by foraging substrate, second by geographic location, and third by diet. The first axis was significantly correlated with mean similarity and affinity. Mean Mahanalobis distances between centroids of groups based upon foraging strata were significantly larger than between localities, indicating local ecological pressures stronger than regional species pool constraints. As most. species foraged in only one stratum in one geographical position and were not omnivorous, the response of species to environmental gradients (continuums) showed a lower coherency with these patterns than did communities, structured around guilds based upon foraging strata and diet.

Variabilidade espacial da estabilidade de agregados e matéria orgânica em solos de relevos diferentes

Soils submitted to the same management system in places with small relief variation manifest different spatial variability on their attributes. The objective of this work was to evaluate the spatial variability of the geometric medium diameter, aggregates in the >2 mm class, aggregates in the 2-1 mm class and organic matter of an Oxisol under culture of the sugarcane. Samplings of the soil in regular intervals of 10 m, in grid form, totaling 100 points, collected in the depths of 0.0-0.2 m and 0.2-0.4 m were made. Data were submitted to descriptive statistics, geostatistics and in sequence to kriging analyzes. Values of the variation coefficient were low for organic matter in the depth of 0.0-0.2 m, mean in the depth of 0.2-0.4 m, high for geometric medium diameter and mean for aggregates in the >2 mm class, aggregates in the 2-1 mm class in all studied depths. The occurrence of space dependence was observed for all the variables, and the largest ones were observed in the depth of 0.0-0.2 m. Small variations in the forms of the relief condition spatial variability differentiated for organic matter and stability of aggregates in the studied depths.

Cytogenetic analysis of A-, B-chromosomes and ZZ/ZW sex chromosomes of Characidium gomesi (Teleostei, Characiformes, Crenuchidae)

Different cytogenetic techniques were used to analyze the chromosomes of Characidium gomesi with the main objective of comparing the base composition of ZZ/ZW sex-chromosomes, B-chromosomes and the heterochromatin of A-chromosomes. The results of digestion of chromosomes with AluI restriction endonuclease (RE), silver and CMA3 staining, C-banding and fluorescence in situ hybridization (FISH) with the 18S rDNA probe suggested the existence of compositional differences between the heterochromatin of ZZ/ZW sex-chromosomes, A- and B-chromosomes, and indicated the presence of different numbers and morphology of B-chromosomes in the samples of this population.

The synergistic effects of Nb/Mn and Sb/Mn on the microstructure and electrical characteristics of BaTiO3 based ceramics

The microstructure and dielectric properties of Nb-Mn or Sb-Mn codoped BaTiO3 compositions were investigated. Starting ceramics powders were prepared by Pechini method. The composites were sintered at 1310°C and 1330°C in an air atmosphere for two hours. The microstructure and compositional investigations were done with SEM equipped with EDS. Two distinguish microstructure regions are observed in Nb/0.05Mn doped BaTiO 3 ceramics sintered at low temperature. The first, large one, with grain sizes from 5-40 μm and the second region with small grain sizes from 1 to 5 μm. Sintering at higher temperature, independent of Mn content, enables to achieve a uniform microstructure with grains less than 6 μm. In Sb/Mn doped ceramics, for both sintering temperatures, bimodal microstructures with fine grained matrix and grains up to 10 μm is formed. The highest value of permittivity at room temperature and the greatest change of permittivity in function of temperature are observed in Nb/0.01Mn doped ceramics compared to the same ones in Sb/Mn doped ceramics. The greatest shift of Curie temperature towards lower temperature has been noticed in Sb/Mn BaTiO3 ceramics compared to others samples. In all investigated samples the dielectric loss after initially large values at low frequency maintains a constant value for f>3 kHz.

Diagnóstico de uma área compactada por atividade minerária, na floresta amazônica, empregando métodos geoestatísticos à variável resistência mecânica à penetração do solo

A quite common problem in the recovery of degraded areas in the mineral exploration understands the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is: increase of the mechanical resistance to the penetration of the rooats, reduction of the aeration, alteration of the water flow and heat. Thus the present work had the basic objective of diagnosing the compaction of a degraded area by mining in a space way, through the mechanical resistance the way penetration to guide a future subsoiling in the place seeking recovery. Through the studies it was concluded that the kriging method in agreement with the space variation allows the division of the area studies in sub areas facilitating a future work to reduce cost and unnecessary interference to the atmosphere. The method was shown quite appropriate and it can be used in diagnosis of the compaction in a degraded area by mining, foreseeing subsoiling need.

Aplicação da Geoestatística Não-paramétrica para a compartimentação geomecânica de uma extensão típica do túnel do metrô - Linha 4, da cidade de São Paulo

In view of the limited number of drill holes, interpolation of the data becomes a relatively complex task. In this study, we sought to make estimates associated with lithological types, since a quantification based on lithology can be extracted from the empty spaces in the sampling. For example, QBarton is always below the median of the biotitic litotype, information which can be used in the elaboration of geostatistical models in situations where samples are lacking. To overcome bias in the data, required by geostatistical conceptualization, we worked with the residuals obtained from the adjustment of a surface and the observed values, for the variographic analysis. The final results made possible a more optimized evaluation of the final costs required for the construction project.

Variabilidade espacial de perdas de solo, do potencial natural e risco de erosão em áreas intensamente cultivadas

The objective of this work was to identify the spatial variability of the natural erosion potential, soil loss and erosion risk in two intensely cultivated areas, in order to assess the erosion occurrence patterns. The soil of the area located at Monte Alto, São Paulo state, was classified as Paleudalf (PVA) with moderately slope, with different managements. The soil of the area located at Jaboticabal, São Paulo state, was classified as Haplortox(LV) with gentle slope and cultivated with sugarcane. A irregular grid was imposed on the experimental areas. Soil samples were obtained from 0-0.2 m depth at each grid point: 88 samples in Monte Alto area (1465 ha) and 128 samples at Jaboticabal area (2597 ha). In order to obtain the values of the studied variables USLE was applied at each grid point. Descriptive statistics were calculated, and geoestatistical analyses were performed for defining semivariograms. Kriging techniques to develop map showing spatial patterns in variability of selected soil attributes were used. All variables showed spatial dependence. The PVA soil showed higher erosion risk due to the slope and atual management compared to the soil LV.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On the nucleation of GaP/GaAs and the effect of buried stress fields

We have recently shown that spatial ordering for epitaxially grown InP dots can be obtained using the periodic stress field of compositional modulation on the InGaP buffer layer. The aim of this present work is to study the growth of films of GaP by Chemical Beam Epitaxy (CBE), with in-situ monitoring by Reflection High Energy Electron Diffraction (RHEED), on layers of unstressed and stressed GaAs. Complementary, we have studied the role of a buried InP dot array on GaP nucleation in order to obtain three-dimensional structures. In both cases, the topographical characteristics of the samples were investigated by Atomic Force Microscopy (AFM) in non-contact mode. Thus vertically-coupled quantum dots of different materials have been obtained keeping the in-place spatial ordering originated from the composition modulation. © 2006 Materials Research Society.

Composition of stingless bee honey: Setting quality standards

Compositional data from 152 stingless bee (Meliponini) honey samples were compiled from studies since 1964, and evaluated to propose a quality standard for this product. Since stingless bee honey has a different composition than Apis mellifera honey, some physicochemical parameters are presented according to stingless bee species. The entomological origin of the honey was known for 17 species of Meliponini from Brazil, one from Costa Rica, six from Mexico, 27 from Panama, one from Surinam, two from Trinidad & Tobago, and seven from Venezuela, most from the genus Melipona. The results varied as follows: moisture (19.9-41.9g/100g), pH (3.15-4.66), free acidity (5.9-109.0meq/Kg), ash (0.01-1.18g/100g), diastase activity (0.9-23.0DN), electrical conductivity (0.49-8.77mS/cm), HMF (0.4-78.4mg/Kg), invertase activity (19.8-90.1IU), nitrogen (14.34-144.00mg/100g), reducing sugars (58.0-75.7g/100g) and sucrose (1.1-4.8g/100g). Moisture content of stingless bee honey is generally higher than the 20% maximum established for A. mellifera honey. Guidelines for further contributions would help make the physicochemical database of meliponine honey more objective, in order to use such data to set quality standards. Pollen analysis should be directed towards the recognition of unifloral honeys produced by stingless bees, in order to obtain standard products from botanical species. A honey quality control campaign directed to both stingless beekeepers and stingless bee honey hunters is needed, as is harmonization of analytical methods. © 2007 Asociación Interciencia.