Análise da variação da vazão e da concentração do metano presentes nos gases gerados no aterro sanitário de Rio Claro - SP

The study of the generation of landfill gas contributes to the understanding of the relationship between gas production and other parameters, such as time of disposal of waste and moisture (rainfall) and, thus, can subsidize the viability study for energy. This study aims to evaluate the interference of the time of disposal of waste and moisture (rainfall) in the production and composition of biogas generated at the landfill in Rio Claro - SP. As a result it was observed that for the landfill studied, the average percentage of methane in biogas ranged from 49.9% to 54.7%. It was found that moisture (rainfall) and the time of waste disposal are parameters which do not cause significant changes in methane concentration in biogas. However, when analyzed the flow of biogas, which had the maximum average value of 152.86m3/h and minimum average value of 15.47m3/h was observed great interference of moisture (rainfall) and the time of disposal of waste, because well of gas located in newer areas of the landfill showed higher values of flow rate than the areas where the landfill was the beginning of the arrangement. The same way, it was observed that in the dry season flow of biogas decreased in all drains gas analyzed

Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions

Rerrefino de óleo lubrificante usado

The lubricant oil used in engines of internal combustion must be, periodically, changed. Its mainly function in the engines is to reduce the friction between the pieces, but its presence also promotes the cleanness and the refrigeration of the equipment. These attributions, at the end of some cycles of operation, make the oil to be dirty, that is, full of contaminating substances such as water, gasoline, diesel, additives, oxidized hydro-carbons and rests of metals, not being recommended, therefore, its discarding in the environment. Thus, all the used lubricant oil that leaves the automobiles engine has been thrust, waiting for a solution. The pollution generated by the discarding of a ton of used oil per day in the soil or in the rivers is equivalent to a domestic sewer of 40 thousand of people. The indiscriminate burning of the used lubricant oil generates significant emissions of metallic oxides, besides other toxic gases, like the dioxin and sulphur oxides. In this context, the mean objective of this essay was to effectuate the rerrefine of the used lubricant oil, aiming the increase of its life cycle and consequently contributing for the reduction of the environmental pollution. According to the used process, it was possible to get a rerrefine oil, of good quality, which physicistchemistries properties are in compliance with the norms of NBR and ASTM

Analise técnico-econômica de um gaseificador Downdraft e de filtros para limpeza de gás de síntese

The biomass gasification systems have been used for a long time and prove to be a good alternative to the generation of energy problems. This type of management requires a simple installation and maintenance which gives them a high availability. In Biomass project via Call CTEnerg 33/2006-1, funded by the Ministry of Science and Technology - MCT - Brazil, the Group Energy Systems Optimization – GOSE - at FEG - UNESP built and tested two prototypes of gasifiers. These is fed with 25 kg / h of dry wood (chips), and 50 Nm3 / h of air to produce gas at a flow rate of approximately 70 Nm3 / h of wood (syngas) at a temperature approximately 600 ° C. In this work of graduation, studies were conducted on the materials used in both the gasifier as well as cleaning the filter synthesis gases. The system of gas cleaning and conditioning is vital to ensure the life of the Internal Combustion Engine. In this case the studies of different filters for small gasification systems (properties, materials used, characteristics, types, etc.) are very relevant to its use in the prototype of the college campus. Were also performed a technical and economic analysis of a cogeneration system that consists in the combination of the downdraft gasifier studied in this work, an internal combustion engine, two heat exchangers and a SRA (absorption system refrigerator). Were calculated the costs of electricity generation, hot water and cold water. Finally, we analyzed the economic feasibility of the project

Cogeração em uma indústria automobilística

The search for energy efficiency improvement is a common concern in many companies. Cogeneration is a well known technique but not so spread in Brazil, despite its potential for energy costs reduction through heat recovery from prime movers. In this work, a preliminary technical and economic study is carried out for a cogeneration plant application in an automotive industry of São Paulo. Though mathematics modeling, three 2435 kW internal combustion engines are selected. When compared to the current status (no cogeneration), annual savings of about 2,2 MR$ are obtained, resulting a almost 3 years payback

Combustão do hidrogênio em escoamento supersônico

This work investigated the operating conditions of a 'scramjet' through numerical simulation considering two-dimensional steady flow. Using a commercial software, FLUENT, cases of inviscid flow with and without fuel injection, turbulent flow without fuel injection, turbulent flow with fuel injection and without burning, and finally turbulent flow with fuel injection and burning are simulated

Análise exergética e ecológica de um sistema compacto de cogeração operando com gás de síntese

The aim of this work is to make a qualitatively and ecologically evaluation of a compact cogeneration system that operates with synthesis gas obtained from a gasifier. Using the Eucalyptus Biomass as fuel, that passes through a wood gasifier (Drowndraft type) and supply the internal combustion engine. The compact cogeneration system is composed of two heat exchangers, an energy generator connected to an internal combustion engine and an absorption refrigeration system. The complete system is installed in the laboratory from the Energy Department at the University of Guaratinguetá. By the analysis related to the First and Second Thermodynamic Laws applied in this system, was possible to identify the mass flows in each point, energetic efficiency, irreversibility and exergetic efficiency. The components that have the biggest irreversibilities are the gasifier, followed by the internal combustion engine, which should be focused in future improvements. The system efficiency in energetic basis is 51,84% and in exergetic basis is 22,78%. Using the ecologic efficiency methodology was possible to identify the emissions rates, the pollution indicator associated to the combustion of the synthesis gas in the internal combustion engine. The ecologic efficiency considering the energectic analysis is 91,73%, while considering the exergetic analysis, 83,65%. It is concluded that the use of the synthesis gas in a compact cogeneration system is viable from the technical and ecological point of view, making possible to generate energy for isolated communities and promoting the decentralized electricity generation

Análise e simulação de modelos matemáticos para a estimativa da geração de gases em bioprocessos de decomposição anaeróbia de resíduos sólidos em aterros sanitários

Brazil faces a complex problem in respect to municipal solid waste, having been in recent years an increase of its generation without the country there be adequate for proper disposal thereof. In many states , the percentage of waste destined improperly , ie , in dumps , landfills, send- outs , among others , is greater than that disposed in landfills , which would be the most correct way to be made. It can be argued that this discrepancy is due to the high cost of implementation and operation of the landfill, and the same need large areas with physical characteristics that suit their operations . When there is a provision in properly constructed landfills , municipal solid waste grounded generate gases with high potential energy through biochemical reactions during the anaerobic decomposition of organic material stored . Such gases can be used for power generation within the landfill or other economic means . To estimate the gas generation will be sufficient for such economic compensation , there are mathematical models that make estimating the amount of gas produced . These models calculate the energy capacity and generation , using parameters obtained based on the characteristics of solid waste , climate of the region where they are grounded and grounding time . Such models have been raised and studied so that it was possible to perform simulations that demonstrate the behavior of biogas generation related to the external conditions of the landfill that interfere with biological reactions within. The results show differences between the values obtained , it shows that the preparation of the models found and used in the simulations were allocated amounts for different parameters that determine this difference in the estimate . Therefore, to rule, the models have difficulty understanding this because there is no clarity in the formulation of the equations , and the definition of variables and parameters would require a detailed study to...

Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Estudo sobre fornos de tratamento térmico e propostas de cogeração de energia em usina siderurgica não integrada

Steel industry is a sector heavily dependent on energy, both electrical and thermal. Since the receipt of raw materials to the shipment of finished products to customers, through mergers, casting, rolling, heat treatment, inspection, among others, high amounts of energy are demanded, generating very significant costs to the productive chain in its entirety . Therefore, any alternative that favors the reduction in energy consumption or barateie the cost of this is very welcome. Within this context, this paper aims to make a technical and economic analysis of installing a cogeneration plant in the field rolling in a non-integrated steel mill. Two configurations are proposed plants, with one being the use of heat from waste gases from furnaces existing in the area mentioned and another with the use of heat from waste gases from an internal combustion engine. Both proposals are evaluated technically and later is done the economic analysis, calculating the financial return (pay back) in relation to the investment required, operation and maintenance of the plant

Análise das emissões de gases do efeito estufa na produção do milho através da fertilização por resíduos de biocombustível. Estudo de caso : Dedelow - Brandemburgo - Alemanha

The focus of this research study were gas exchange between soil and atmosphere of nitrous oxide (N2O) between different fertilization treatments Corn The research, conducted in the experimental field Dedelow - Brandenburg / Germany, analyzed three different fertilization treatments, aiming to quantify GHE emissions, to identify the influence of the residue of biogas in the release of these gases process in agricultural soils in search for a solution fertilization less harmful to the environment and the greenhouse effect , based on the comparison of three treatments: organic fertilization, mineral fertilization and no fertilization. It was found through the analysis of the measurements that the first was the one which issued N2O, showing that even though coming from the residue of biogas , when returned to the soil, it becomes harmful to the environment and global warming . The cultivation of energy crops can lower or raise the emissions of greenhouse gases, so it is necessary for further research on this question not only in Germany , where such research is in continuity, but also in Brazil, a pioneer in the introduction to his energy matrix of a biofuel produced from cane sugar

The Mutagenic Potential Caused by the Emissions from Combustion of Crude Glycerin and Diesel Fuel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dispositivo de microdescargas em gases na pressão atmosférica

Neste trabalho foi desenvolvido um dispositivo de microdescargas em gases à pressão atmosférica para geração de plasma a fim de ser utilizado no tratamento de superfícies. O trabalho foi baseado em um estudo de iniciação científica que aconteceu em duas etapas. Na introdução apresentam-se as motivações do estudo, o dispositivo desenvolvido na primeira etapa do trabalho bem como os primeiros resultados e propostas de melhorias. Definem-se os objetivos da segunda etapa, que contemplam modificações no dispositivo de descarga e na fonte de alimentação. Em seguida são explanados os métodos utilizados para confecção do dispositivo, construção da fonte de alimentação e circuito de fotodetecção para observar as descargas. Apresenta-se o modelo e configurações dos experimentos, os resultados obtidos são expostos e debatidos brevemente. Colocam-se as conclusões do trabalho e novas propostas de investigação e melhoramentos para o estudo das microdescargas. Seguem-se os agradecimentos aos envolvidos no projeto e, por fim, a bibliografia utilizada

Caracterização de estruturas de óxido de estanho modificado como sensores de gases

Pós-graduação em Química - IQ

Engine LES with fuel-spray modeling

Pós-graduação em Engenharia Mecânica - FEG