Nitrogênio em cobertura e molibdênio via foliar no feijoeiro irrigado cultivado em solo de cerrado

O nitrogênio é o nutriente exigido em maior quantidade pelo feijoeiro e, mesmo quando suprida adequadamente desse nutriente, a planta de feijão pode ter sua produtividade limitada pela deficiência de molibdênio, pela participação deste no metabolismo do nitrogênio. O objetivo deste trabalho foi avaliar a resposta do feijoeiro (Phaseolus vulgaris L.), cultivar 'BRS Pontal', irrigado, à aplicação de nitrogênio em cobertura e molibdênio via foliar, quando cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental foi o de blocos ao acaso, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos de quatro doses de nitrogênio (0, 30, 60 e 120 kg ha-1) aplicados em cobertura, utilizando como fonte a ureia, e pela aplicação ou não de molibdênio (80 g ha-1) via foliar, na forma de molibdato de amônio. O índice relativo de clorofila nas folhas do feijoeiro foi aumentado pela aplicação de nitrogênio em cobertura e molibdênio via foliar. A aplicação de nitrogênio em cobertura proporcionou aumento na produtividade de grãos do feijoeiro apenas quando combinado com o fornecimento de molibdênio via foliar. O fornecimento de 80 g ha-1 de molibdênio via foliar aumentou a eficiência de utilização do nitrogênio pelo feijoeiro.

Distribuição de Cr, Ni, Cu, Cd e Pb em frações húmicas de diferentes tamanhos moleculares extraídas de amostras de água e de sedimentos do reservatório de captação de água superficial Anhumas - Araraquara-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

ABSORÇÃO DE CÁDMIO E CRESCIMENTO DEFEIJOEIRO (Phaseolus vulgaris, L. cv carioca)

A absorção de cádmio e seus efeitos no crescimento de feijoeiro (Phaseolus vulgaris, L. cv carioca) foi estudada em solução nutritiva completa de Hoagland & Arnon acrescida de doses de cádmio com concentrações entre 10 e 200 mmol L-1. Os teores de cádmio em folhas e raízes aumentaram à medida que aumentou a concentração de cádmio na solução nutritiva. Os teores de cádmio nas raízes foram maiores que nas folhas. Os resultados mostraram que a inibição do crescimento de folhas e raízes provocadas pela presença de cádmio são reversíveis.

Cádmio e a atividade de peroxidase durante a germinação de sementes de feijoeiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de parâmetros indicadores de poluição por efluente líquido de um aterro sanitário

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molibdênio via semente e nitrogênio em cobertura no feijoeiro irrigado em solo de cerrado

O nitrogênio é o nutriente mais exigido pelo feijoeiro e seu metabolismo pode ser seriamente prejudicado pela deficiência de molibdênio. Conduziu-se este trabalho, com o objetivo de avaliar o efeito da aplicação de molibdênio via semente e nitrogênio em cobertura nas características agronômicas e produtividade do feijoeiro 'BRS Pontal' irrigado, cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental utilizado foi o de blocos casualizados, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos pela aplicação ou não de Mo (80 g ha-1) via semente e quatro doses de N (0, 30, 60 e 120 kg ha-1), em cobertura aos 16 dias, após a emergência, na forma de uréia. A aplicação de Mo via semente aumentou o índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos no feijoeiro, principalmente com o uso de altas doses de N em cobertura. O índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos do feijoeiro foi aumentada linearmente pela aplicação de até 120 kg ha-1 de N em cobertura. O fornecimento de Mo via tratamento de semente aumentou a eficiência de utilização do N pelo feijoeiro.

Motilidade espermática, fertilização dos ovócitos e eclosão dos ovos de Jundiá em água contaminada por cádmio

Este estudo foi realizado para avaliar o efeito da contaminação da água por cádmio sobre a taxa de fertilização dos ovócitos e de eclosão dos ovos e a duração da motilidade espermática em jundiá (Rhamdia quelen). Foram realizados dois ensaios: no ensaio 1, foi avaliado o efeito do cádmio sobre a fertilização artificial dos ovócitos e a eclosão dos ovos e, no ensaio 2, o efeito do cádmio sobre a duração da motilidade espermática. em ambos os ensaios, adotou-se o delineamento experimental inteiramente casualizado com cinco níveis de cádmio na água (0; 20; 50; 80 e 110 mg L-1), avaliados com quatro (ensaio 1) ou três repetições (ensaio 2). As taxas de fertilização e eclosão tiveram resposta linear, mantendo-se constantes até os níveis de 28,6 e 40,4 mg L-1, respectivamente. A partir desses níveis, ocorreu um efeito linear inversamente proporcional entre as taxas de fertilização e eclosão e o aumento dos níveis de cádmio. O aumento do nível de cádmio na água teve efeito linear inverso na duração da motilidade espermática, proporcionando redução de 21,8s em água limpa para 10,6s em água contaminada contendo 110 mg-1. Níveis a partir de 20,0 e 28,6 mg L-1 influenciam espermatozoides e ovócitos de jundiá, respectivamente.

Arrays of gold microelectrodes made from split integrated circuit chips

A simple and inexpensive way to fabricate arrays of gold microelectrodes is proposed. Integrated circuit chips are sawed through their middle, normal to the longest axis, leading to destruction of the silicon circuit and rupture of the gold wires that interconnect it with the external terminals. Polishing the resulting rough surface converts the tips of the wires embedded in the chip halves into arrays of gold microdisks of about 25 mu m diameter. The number of active microelectrodes (MEs), of an array depends on the number of pins in the chip, n, being typically (n/2)-4. These MEs can be used individually or externally interconnected in any combination. X-ray images of the chips and micrographs of the resulting surface of the polished arrays have revealed variable distances between neighbor MEs, which are, however, larger than 10 times the radius of the disks. This feature of the MEs prevents diffusional cross-talk between electrodes. The use of these microdisk electrodes for analytical purposes exhibits sigmoidal voltammograms, and chronoamperometric experiments confirm the nonlinear i vs. t(1/2) plots, typical for processes where radial diffusion prevails. Satisfactory uniformity was observed for the response of each electrode of an array, indicating similarity of geometry and disk areas. The potentialities of these MEs were demonstrated by the determination of cadmium at ppb levels using square wave voltammetry with preconcentration. Due to the relative ease with which these MEs can be manufactured and their good performance in (chemical) analysis, wide applications in electrochemistry and electroanalysis is envisioned.

Flow-injection spectrophotometric determination of methyldopa in pharmaceutical formulations

A flow-injection spectrophotometric procedure is proposed for methyldopa determination in pharmaceutical preparations. The determination is based on formation of a yellow product (measured at 410 nm) after complexation of methyldopa with molybdate. Under optimal conditions, Beer's law is obeyed in a concentration range of 50-200 mg l(-1) methyldopa. Typical correlation between absorbance and analyte concentration was 0.9999. Usual excipients used as additives in pharmaceuticals do not interfere with the proposed method. The analytical frequency was 210 h(-1) and the relative standard deviation (R.S.D.) was <= 2% for sample solution containing 150 mg l(-1) methyldopa (n = 11). The analytical results obtained in commercial formulations by applying the proposed FIA method were in good agreement with labeled values and those obtained by the Brazilian Pharmacopoeia procedure at 95% confidence level. (C) 2005 Elsevier B.V. All rights reserved.

A study on X-ray irradiation of composite polyaniline LB films

Composite Langmuir-Blodgett (LB) films from polyaniline and cadmium stearate have been irradiated with ionizing X-rays for various exposure times. In the initial stages of X-ray irradiation the absorption peak at 580 nm of an as-deposited film was seen to decrease with a concomitant increase in the absorption in the long wavelength region (700-1100 nm). Upon prolonging the irradiation, the absorption maximum shifted to 800 nm with the LB film color changing to green, characteristic of acid doped polyaniline. The changes in the Fourier transform infrared (FTIR) spectra upon irradiation are also similar to those observed upon acid doping of polyaniline. When compared with acid doping, two major differences were observed for the LB films exposed to X-rays. First, the packing order of the cadmium stearate domains in the composite LB films - as observed by X-ray diffraction - is not affected by the X-ray irradiation. In addition, no significant increase in the DC conductivity was noted after the X-ray exposure whereas similar LB films have their conductivity increased by an order of magnitude upon acid doping. These differences may be explained by considering that the inter-domain contribution to the conductivity is increased by the acid doping because the insulating cadmium stearate domains are destroyed, which does not occur with the X-ray irradiation. (C) 1998 Elsevier B.V. S.A. All rights reserved.

Potentialities and practical limitations of absolute neutron dosimetry using thin films of uranium and thorium applied to the fission track dating

Neutron dosimetry using natural uranium and thorium thin films makes possible that mineral dating by the fission-track method can be accomplished, even when poor thermalized neutron facilities are employed. In this case, the contributions of the fissions of (235)U, (238)U and (232)Th induced by thermal, epithermal and fast neutrons to the population of tracks produced during irradiation are quantified through the combined use of natural uranium and thorium films.If the Th/U ratio of the sample is known, only one irradiation (where the sample and the films of uranium and thorium are present) is necessary to perform the dating. However, if that ratio is unknown, it can be determined through another irradiation where the mineral to be dated and both films are placed inside a cadmium box.Problems related with film manufacturing and calibration are discussed. Special attention is given to the utilization of thin films having very low uranium content. The problems faced suggest that it may be better to substitute these films by uranium doped standard glasses calibrated with thicker uranium films (thickness greater than 1.5 x 10(13) mu m).

Temperature dependence of photoinduced birefringence in mixed Langmuir-Blodgett (LB) films of azobenzene-containing polymers

The temperature dependence of photoinduced birefringence was investigated for mixed Langmuir-Blodgett (LB) films from the homopolymer poly[4'-[[2-(methacryloyloxy)ethyl]ethyl-amino]-2-chloro-4-nitroazobenzene] (HPDR13) and cadmium stearate (Cdst) and from the copolymer 4-[N-ethyl-N-(2-hydroxyethyl)]amino-2'-chloro-4'-nitroazobenzene (MMA-DR13) and CdSt. Birefringence was achieved by impinging a linearly polarized light on the LB films. The maximum birefringence achieved decreased with temperature as thermal relaxation of the chromophores was facilitated. The buildup curves for birefringence were fitted with biexponential functions representing distinctly different mechanisms with time constants. The first, fast process is thermally activated and may be represented by an Arrhenius process. The decay of birefringence after switching off the laser source was described by a Kohlraush-Williams-Watts (KWW) function, consistent with a distribution of relaxation times for the polymer system. Activation energies were obtained from Arrhenius plots of the rate constant of the exponential functions and KWW function, which showed that the buildup of birefringence was very similar for the two polymer systems. The decay, however, was slower for the LB film from MMA-DR13/CdSt. (C) 2002 Published by Elsevier B.V. Ltd.

Distribution profile and availability of Cr, Ni, Cu, Cd and Pb in different sediments from anhumas surface water collection reservoir, Araraquara-São Paulo State, Brazil

In this work the influence of the anhtropogenic activities in the uptake of metals at a reservoir for public water supply in Araraquara City, São Paulo State, Brazil was studied. For this, the distribution of Cr, Ni, Cu, Cd and Pb in sediments collected from Anhumas reservoir, at seven sampling points and at three depths for each point was investigated. The pseudo-total and available metals contained in the different sediment samples were assessed using an ICP-AES technique. Among the five metals studied, cadmium possesses the largest relative potential availability, with percentages of 20 to 98% for the three different sediment types. In addition, the following decreasing availability order was characterized: Cd > Cu > Pb > Ni > Cr.

Distribution of Cr, Ni, Cu, Cd and Pb in different molecular size of humic fractions extracted from water and sediment samples collected at Anhumas reservoir - Araraquara/SP

In this work was studied the distribution of Cr, Ni, Cu, Cd and Pb in humic fractions with different molecular size. The HS were extracted from waters (AHS), surface sediments (HESS), interface water sediment (HSIS) and bottom sediment (HSBS) collected in the Anhumas surface water collection reservoir, located in the district of Araraquara - São Paulo State Brazil. The humic substances were extracted by procedures recommended by International Humic Substances Society (IHSS). After purification by dialysis, the humic substances were fractionated using a multistage tangential flow ultrafiltration system. The fractionation patterns of HS characterized a mass distribution relatively uniform among the fractions with different molecular sizes, with larger values in the fractions F-2 (20.8%) and F-4 (23.8%), Except for the ions Pb(II) and Cu(II), which presented relatively higher concentrations in the fractions F-2 and F-4, respectively. In general, chromium, nickel, cadmium and lead have similar distributions in the five fractions with larger and medium molecular sizes (F-1 to F-5). With relation to the mass distributions in the different humic substances fractions extracted from sediment samples collected at three depth, they presented 42-48% of HS in the fractions with larger molecular sizes (F-1 and F-2), 29-31% in the middle fractions (F-3 and F-4) and 13-20% in the fractions with smaller molecular sizes (F-5 and F-6). In general, the metallic ions presented distributions similar among the respective fractions F-1 to F-6, Exceptions for Pb(II) and M(II) in surface sediment with concentrations relatively smaller in the fractions F-2 and F-4, respectively,

Protein profile of Acidithiobacillus ferrooxidans strains exhibiting different levels of tolerance to metal sulfates

Strains of Acidithiobacillus ferrooxidans exhibited differences in the inhibition of Fe(2+) oxidation in the presence of 250 mm of cadmium, zinc, and manganese sulfates in respirometric assays. Strains LR and I35 were practically not inhibited, whereas strains SSP and V3 showed significant inhibition (30-70%). Analysis by SDS-PAGE of total proteins from cells grown in the absence of metal sulfates showed different profiles between the more tolerant strains (LR and 135) and the more susceptible ones (SSP and V3). Total proteins of strains LR and V3 were also resolved by two-dimensional polyacrylamide gel electrophoresis (2-DE). A set of major proteins (40, 32, 22, and 20 kDa) could be identified only in the more tolerant strain LR. Our results show that protein profiles analysis could differentiate A. ferrooxidans strains that considerably differ in the tolerance to metal sulfates and present low genomic similarity as revealed by Random Amplified Polymorphic DNA (RAPD) data obtained previously in our laboratory.