Effect of the clinical application of the GaAlAs laser in the treatment of dentine hypersensitivity

Objective: the aim of this study was to evaluate the effectiveness of the clinical use of the gallium-aluminum-arsenium (GaAlAs) laser at the maximum and minimum energies recommended by the manufacturer for the treatment of dentine hypersensitivity.Background Data: Dentine hypersensitivity (DH) is a response to a stimulus that would not usually cause pain in a healthy tooth. It is characterized by sharp pain of short duration from the denuded dentin. Its etiology is unknown. The dentin only begins to show sensitivity when exposed to the buccal environment. This exposure can result after removal of the enamel and/or dental cement, or after root denudation. Different treatments are proposed for this disorder.Materials and Methods: In this study, 25 patients, with a total number of 106 cases of DH, were treated with GaAlAs low-level laser therapy (LLLT). 65% of the teeth were premolars; 14% were incisors and molars; 6.6% were canines. The teeth were irradiated with 3 and 5 J/cm(2) for up to six sessions, with an interval of 72 It between each application, and they were evaluated initially, after each application, and at 15 and 60 days follow-up post-treatment.Results: the treatment was effective in 86.53% and 88.88% of the irradiated teeth, respectively, with the minimum and maximum energy recommended by the manufacturer. There was a statistically significant difference between DH and after a follow-up of 60 days for both groups. The difference among the energy maximum and minimum was not significant.Conclusion: the GaAlAs low-level laser was effective in reducing initial DH. A significant difference was found between initial values of hypersensitivity and after 60 days follow-up post-treatment. No significant difference was found between minimum (3 J/cm(2)) and maximum (5 J/cm(2)) applied energy.

EFFECT OF ASCORBIC-ACID DEFICIENCY ON THE GROWTH, GILL FILAMENT LESIONS AND BEHAVIOR OF PACU FRY (PIARACTUS-MESOPOTAMICUS HOLMBERG, 1887)

The effect of ascorbic acid deficiency was determined in Piaractus mesopotamicus Holmberg, 1887, fish (pacu) under laboratory conditions. A total of 120 fish with an average body weight of 8.64 +/- 1.62 g and measuring 6.15 +/- 0.33 cm in length at the beginning of the experiment were fed diets containing 0, 50, 100 or 200 mg palmitate-coated ascorbic acid/kg dry ration for a period of 24 weeks with measurements every 4 weeks. The experiment was conducted in 20 fiber-cement aquaria of 81-liter capacity. Each aquarium was supplied with dechlorinated water at a flow rate of 1 l/min. Water temperature was measured daily and pH, dissolved oxygen, alkalinity and water conductivity were determined weekly. A fully randomized experimental design was utilized, with 5 replicates of each treatment and 6 fish per aquarium. Ascorbic acid-supplemented fish presented significantly increased growth when compared to unsupplemented fish. Furthermore, unsupplemented fish presented a higher incidence of hyperplasia, hypertrophy and dysplasia of the bone cartilage of gill filaments. The gill lamellae of unsupplemented fish had twisted cartilage and an inflammatory infiltrate at the ends. Anorexia and increased handling stress were also observed in fish fed the unsupplemented diet. The present study suggests that 50 mg ascorbic acid/kg dry ration is sufficient to improve development of pacu fingerlings but the optimum level under aquarium conditions, determined by regression analysis, is 139 mg ascorbic acid/kg dry ration.

The effect of hetero- and homosexual experience and long-term treatment with fluoxetine on homosexual behavior in male rats

Introduction the selective serotonin reuptake inhibitors have become the most frequently prescribed drugs for the treatment of depression. Sexual side effects have been noted to occur with this treatment on heterosexual behavior in rats. Heterosexual experience facilitates sexual orientation of male rats and decreases the latencies to first mount and first intromission. on the other hand, homosexual behavior in male rats induced by female hormones has not been evaluated.Aim the objective of this work is to evaluate the effects of heterosexual and homosexual experience in male rats long-term treated with fluoxetine (FLX) on homosexual hormone-induced behavior.Materials and Methods Male rats were treated with FLX or saline solution (10 mg/kg for 65 days). At days 36, 50, and 65 of the treatment, the rats were evaluated for homosexual behavior. Other rats treated with FLX or saline solution for 60 consecutive days were submitted to heterosexual behavior at 14, 21, and 28 days of the treatment. After this, they were orquiectomized and homosexual hormone-induced behavior was observed at 45 and 60 days of the treatment.Results (1) Only treatment with FLX did not affect the homosexual behavior. (2) the homosexual experience facilitated the homosexual behavior mainly on the animals from the control group. (3) the heterosexual experience facilitated the homosexual behavior on both groups.Conclusions Only long-term administration of FLX does not interfere with the homosexual behavior in male rats. The homosexual and the heterosexual experience facilitated the homosexual behavior on the control and experimental groups. We suggested that learning aspects related to sexual behavior are responsible by these results.

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

Statement of problem. Ceramic surface treatment is crucial for bonding to resin. High crystalline ceramics are poorly conditioned using traditional procedures.Purpose. The purpose of this study was to evaluate the effect of silica coating on a densely sintered alumina ceramic relative to its bond strength to composite, using a resin luting agent.Material and methods. Blocks (6 X 6 X 5 mm) of ceramic and composite were made. The ceramic (Procera AllCeram) surfaces were polished, and the blocks were divided into 3 groups (n = 5): SB, airborne-particle abrasion with 110-mu m Al(2)O(3); RS, silica coating using Rocatec System; and CS, silica coating using CoJet System. The treated ceramic blocks were luted to the composite (W3D Master) blocks using a resin luting agent (Panavia F). Specimens were stored in distilled water at 37 degrees C for 7 days and then Cut in 2 axes, x and y, to obtain specimens with a bonding area of approximately 0.6 mm(2) (n = 30). The specimens were loaded to failure in tension in a universal testing machine, and data were statistically analyzed using a randomized complete block design analysis of variance and Tukey's test (alpha=.05). Fractured surfaces were examined using light microscopy and scanning electron microscopy to determine the type of failure. Energy-dispersive spectroscopy was used for surface compositional analysis.Results. Mean bond strength values (MPa) of Groups RS (17.1 +/- 3.9) (P = .00015) and CS (18.5 +/- 4.7) (P=.00012) were significantly higher than the values of Group SB (12.7 +/- 2.6). There was no statistical difference between Groups RS and CS. All failures occurred at the adhesive zone.Conclusion. Tribochemical silica coating systems increased the tensile bond strength values between Panavia F and Procera AllCeram ceramic.

Effect of thermal treatment temperature on the crystallinity and morphology of LiTaO3 thin films prepared from polymeric precursor method

Lithium tantalate thin films (LiTaO3) with (50:50) stoichiometry were prepared by spin coating method using a polymeric organic solution. The films were deposited on silicon (100) substrates with 4 layers. The substrates were previously cleaned and then the solution of lithium tantalate was deposited by adjusting the speed at 5000 rpm. The thin films deposited were thermally treated from 350 to 600degreesC for 3 hours in order to study the influence of the thermal treatment temperature on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction (XRD) results showed that the films are polycrystalline and secondary phases free. The thickness of films was observed by scanning electron microscopy (SEM). The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by thermal treatment.

EFFECT OF TREATMENT WITH GROWTH-REGULATORS AND SCARIFICATION ON THE TOLERANCE TO WATER-STRESS IN SEEDS OF ORYZA-SATIVA LCVIAC-165

The effect of treatment of seeds of Oryza sativa L. cv. IAC 165 with gibberellic acid, 6-benzyladenine and ethrel on the tolerance to the water stress were analysed. Gibberellic acid had no effect and 6-benzyladenine and ethrel promoted slight increase in the tolerance to water stress, specially in darkness. After scarification, those growth regulator presented no effect. Our results suggest that 6-benzyladenine and ethrel promoted water stress tolerance due to the decrease in the resistance of the seed coat to embryo expansion.

Effect of heated solutions on decay control and residues of imazalil in lemons

Freshly harvested lemons [(Citrus limon (L.) Burm)] were dipped 3 min in water with and without imazalil (IMZ) at 50, 100, and 200 ppm at 50 degrees C and at 1000 ppm IMZ at 20 degrees C. Following treatments fruit were kept at 9 degrees C and 90%-95% relative humidity (RH) for 13 weeks and an additional week at 21 degrees C and ca. 75% RH, to simulate a marketing period (SMP). No decay control was observed with fruit dipped in water at 50 degrees C. In contrast, IMZ treatments provided 90%-96% control of Penicillium rots during cold storage and SMP. Fungi other than Penicillium spp. were also found in all samples as differences among treatments were negligible. IMZ treatment caused some external damage to the fruit (peel browning), and the percentage of damaged fruit was related to the amount of active ingredient (AI) present in it. Dipping in 200 or 1000 ppm IMZ promoted off-flavor development after 10 weeks of storage, and fruit were judged to be unacceptable for consumption after 13 weeks of cold storage. After 1000 ppm IMZ dipping at 20 degrees C, residue concentration in fruit was 8.20 ppm; this value doubled that found in a previous investigation on lemons treated with comparable IMZ levels. Residue concentrations in fruit after treatment at 50 degrees C was strictly related to the amount of fungicide employed. After 13 weeks Al residues in fruit decreased to average ca. 35% of the initial values. During the 1 week SMP, residue levels decreased by a further ca. 25%. It was concluded that it is possible to achieve significant control of decay in lemons during longterm storage by dipping fruit in 50 ppm IMZ mixtures at 50 degrees C. Such treatment should be advised to remarkably reduce potential pollution in the environment due to packinghouse wastewater disposal.

The effect of drying and urea treatment on nutritional and anti-nutritional components of browses collected during wet and dry seasons

Fibre, crude protein and tannin concentrations were measured in browse species from the semi-arid region of Northeast Brazil during the dry and wet seasons. The effects of oven-, sun- and shade-drying and of urea treatment were also determined. Crude protein (CP) content varied from 103 to 161 g/kg dry matter (DM) and the browses had similar CP content in the two seasons (during 2002) (102-161 and 107-153 g/kg DM in the wet and dry seasons, respectively). Total tannin concentrations ranged from 13 to 201 g/kg DM amongst the browses and were higher in the dry season. A 30-d treatment with urea reduced extractable tannins significantly (P < 0.05). The urea treatment was also most effective at reducing the in vitro effects of tannins compared to the other drying treatments. This was demonstrated by measuring the effect of polyethylene glycol (PEG) on gas production. Addition of PEG increased gas production of oven- (81.4%), sun- (78.5%) and shade-dried (76.7%) samples much more compared to urea treated samples (10.9%). (c) 2005 Elsevier B.V. All rights reserved.