Upland rice yield as affected by previous summer crop rotation (soybean or upland rice) and glyphosate management on cover crops

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of phenol, glycerin and acetic acid on the liver of guinea pigs

OBJETIVO: Investigar a ação histolítica da solução composta de fenol, glicerina e ácido acético para os casos de metástases hepáticas não ressecáveis. MÉTODOS: Foram utilizadas 32 cobaias, distribuídas, por sorteio, em quatro grupos: experimental (24 horas e quatro semanas) e controle (24 horas e quatro semanas); todos os animais foram submetidos a laparotomia mediana e realizada a injeção da solução E (grupo experimental) ou solução fisiológica (grupo controle). Foram estudadas as alterações bioquímicas e anatomopatológicas (fígado) com 24 horas e quatro semanas de evolução. RESULTADOS: Verificou-se que a solução E produz necrose delimitada à área infiltrada apos 24 horas e que ao final de quatro semanas ocorreu regeneração do tecido hepático com formação de discreta área de fibrose. Não foram observadas quaisquer alterações bioquímicas tanto no grupo experimental como controle. CONCLUSÃO: Frente aos resultados obtidos, é válido considerar-se a possibilidade do emprego da solução proposta, nos casos de metástases hepáticas não ressecáveis.

Long term evaluation of morphometric and ultrastructural changes of testes of alloxan-induced diabetic rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Topical 1% Nalbuphine on corneal sensivity and epitheilization after experimental lamellar keratectomy in rabbits

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coincidence of flowering time and the productivity and quality of cauliflower hybrid seeds

A falta de sincronismo de florescimento entre as linhagens auto incompatíveis em um campo de produção de sementes híbridas de couve flor pode além de reduzir a produção de sementes comprometer a pureza genética das mesmas. Com o objetivo de estudar o efeito da coincidência de florescimento entre linhagens de couve-flor na produtividade e qualidade de sementes híbridas, foi realizado o presente experimento. Os tratamentos consistiram em seis diferentes épocas de semeadura, espaçadas a cada quinze dias, de uma linhagem de verão auto-incompatível que foi polinizada por uma linhagem de inverno que não apresenta auto-incompatibilidade. Observou-se a coincidência do florescimento das diferentes épocas de semeadura com a linhagem polinizadora. Foram avaliadas as seguintes características: área foliar média, número de flores por planta, número de síliqüas por planta, número de sementes por planta (peso e número), peso médio de 1000 sementes e foi determinado o número de sementes por síliqüa. Foi realizado ainda, o teste padrão de germinação e determinada a pureza genética das sementes para cada tratamento. A coincidência da época de florescimento entre as linhagens de couve-flor afetou diretamente a produtividade e a qualidade genética das sementes híbridas produzidas, sendo que, quanto maior foi o nível de coincidência, maior foi o número de sementes formadas por síliqüa e menor a percentagem de sementes contaminantes. Entretanto, não teve influência na qualidade fisiológica das mesmas.

Gibberellin and cytokinin effects on soybean growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Soil loss risk and habitat quality in streams of a meso-scale river basin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vegetative and productive aspects of organically grown coffee cultivars under shaded and unshaded systems

Although Coffea arabica species has its origin in the African understories, there is great resistance on the part of the Brazilian producers for growing this species under agroforestry systems as they fear that shading reduces production. This study aimed at evaluating some vegetative traits and the productivity of organically grown coffee (Coffea arabica L.) cultivars under shaded and unshaded systems. Twelve treatments consisting of two cultivation systems (shaded and unshaded) and six coffee cultivars were arranged in randomized blocks with four replicates, in a split-plot scheme. Shading was provided by banana (Musa sp.) and coral bean plants (Erythrinaverna). Shading delayed fruit maturation. Late maturation cultivars, such as the Icatu and the Obatã, matured early in both cultivation systems, while medium and early maturation cultivars presented late maturation. Cultivation in the shaded system increased the leaf area and the number of lower branches, decreased the number of productive nodes per branch, and increased the distance between the nodes and the number of leaves present in the branches. Cultivation in the unshaded system presented greater number of plants with branch blight in relation to plants grown in the shade. The productivity of the cultivars was not different, at 30.0 processed bags per hectare in the shaded system, and 25.8 processed bags per hectare in the unshaded system. The most productive cultivars in the shaded system were the Tupi, the Obatã, and the Catuaí, while no differences between cultivars were obtained in the unshaded system.

Genetics of anthracnose panel canker disease resistance and its relationship with yield and growth characters in half-sib progenies of rubber tree (Hevea brasiliensis)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An analysis of the floristic composition and diversity of Amazonian forests including those of the Guiana Shield

A large number of newly published and unpublished hectare plots in Amazonia and the Guiana Shield area allow an analysis of family composition and testing of hypotheses concerning alpha-diversity in the south American rain forest. Using data from 94 plots the family-level floristic patterns in wet tropical South America are described. To test diversity patterns, 268 plots are used in this large area. Contrary to a widely held belief, western Amazonian plots are not necessarily the most diverse. Several central Amazonian plots have equal or even higher tree diversity. Annual rainfall is not a good estimator for tree diversity in the Amazonia area and Guiana shield. Plots in the Guiana Shield area (and eastern Amazonia) usually have lower diversity than those in central or western Amazonia. It is argued that this is not because of low rainfall or low nutrient status of the soil but because of the small area of the relatively isolated rain forest area in eastern Amazonia and the Guiana Shield. The low diversity on nutrient-poor white sand soils in the Amazon basin is not necessarily due to their Low nutrient status but is, at least partly, caused by their small extent and fragmented nature.

Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners

Statement of problem. Two problems found in prostheses with resilient liners are bond failure to the acrylic resin base and increased permanent deformation due to material aging.Purpose. This in vitro study evaluated the effect of varying amounts of thermal cycling on bond strength and permanent deformation of 2 resilient denture liners bonded to an acrylic resin base.Material and methods. Plasticized acrylic resin (PermaSoft) or silicone (Softliner) resilient lining materials were processed to a heat-polymerized acrylic resin (QC-20). One hundred rectangular specimens (10 X 10-mm(2) cross-sectional area) and 100 cylindrically-shaped specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Specimens were divided into 9 test groups (n=10) and were thermal cycled for 200, 500, 1000, 1500, 2000, 2500, 3000, 3500, and 4000 cycles. Control specimens (n=10) were stored for 24 hours in water at 37degreesC. Mean bond strength, expressed as stress at failure (MPa), was determined with a tensile test using a universal testing machine at a crosshead speed of 5 mm/min. Analysis of failure mode, expressed as a percent (%), was recorded as either cohesive, adhesive, or both, after observation. Permanent deformation, expressed as a percent (%), was determined using ADA specification no. 18. Data from both tests were examined with a 2-way analysis of variance and a Tukey test (alpha=.05).Results. For the tensile test, Softliner specimens submitted to different thermal cycling regimens demonstrated no significantly different bond strength values from the control; however, there was a significant difference between the PermaSoft control group (0.47 +/- 0.09 MPa [mean +/- SD]) and the 500 cycle group (0.46 +/- 0.07 MPa) compared to the 4000 cycle group (0.70 +/- 0.20 MPa) (P<.05). With regard to failure type, the Softliner groups presented adhesive failure (100%) regardless of specimen treatment. PermaSoft groups presented adhesive (53%), cohesive (12%), or a combined mode of failure (35%). For the deformation test, there was no significant difference among the Softliner specimens. However, a significant difference was observed between control and PermaSoft specimens after 1500 or more cycles (1.88% +/- 0.24%) (P<.05).Conclusions. This in vitro study indicated that bond strength and permanent deformation of the 2 resilient denture liners tested varied according to their chemical composition.

Preparation and characterization of LiNi0.8Co0.2O2/PANI microcomposite electrode materials under assisted ultrasonic irradiation

A preparation method for a new electrode material based on the LiNi0.8Co0.2O2/polyaniline (PANI) composite is reported. This material is prepared by in situ polymerization of aniline in the presence of LiNi0.8Co0.2O2 assisted by ultrasonic irradiation. The materials are characterized by XRD, TG-DTA, FTIR, XPS, SEM-EDX, AFM, nitrogen adsorption (BET surface area) and electrical conductivity measurements. PANI in the emeraldine salt form interacts with metal-oxide particles to assure good connectivity. The dc electrical conductivity measurements at room temperature indicate that conductivity values are one order of magnitude higher in the composite than in the oxide alone. This behavior determines better reversibility for Li-insertion in charge-discharge cycles compared to the pristine mixed oxide when used as electrode of lithium batteries. (c) 2005 Elsevier B.V. All rights reserved.

Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners

Statement of problem. Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging.Purpose. This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases.Material and methods. Four soft lining materials (Molloplast-B, Flexor, Permasoft, and Pro Tech) and 2 acrylic resins (Classico, and Lucitone 199) were processed for testing according to manufacturers' instructions. Twenty rectangular specimens (10 X 10-mm(2) cross-sectional area) and twenty cylinder specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Samples were divided into a test group that was thermocycled 3000 times and a control group that was stored for 24 hours in water at 37degreesC. Mean bond strength, expressed in megapascals (Wa), was determined in the tensile test with the use of a universal testing machine at a crosshead speed of 5 mm/min. Elasticity, expressed as percent of permanent deformation, was calculated with an instrument for measuring permanent deformation described in ADA/ANSI specification 18. Data from both tests were examined with 1-way analysis of variance and a Tukey test, with calculation of a Scheffe interval at a 95% confidence level.Results. In the tensile test under control conditions, Molloplast-B (1.51 +/- 0.28 MPa [mean SD]) and Pro Tech (1.44 +/- 0.27 MPa) liners had higher bond strength values than the others (P < .05). With regard to the permanent deformation test, the lowest values were observed for Molloplast-B (0.48% +/- 0.19%) and Flexor (0.44% +/- 0.14%) (P < .05). Under thermocycling conditions, the highest bond strength occurred with Molloplast-B (1.37 +/- 0.24 MPa) (P < .05) With regard to the deformation test, Flexor (0.46% +/- 0.13%) and Molloplast-B (0.44% +/- 0.17%) liners had lower deformation values than the others (P < .05).Conclusion. The results of this in vitro study indicated that bond strength and permanent deformity values of the 4 soft denture liners tested varied according to their chemical composition. These tests are not completely valid for application to dental restorations because the forces they encounter are more closely related to shear and tear. However, the above protocol serves as a good method of investigation to evaluate differences between thermocycled and control groups.

Light and scanning electron microscopic study of the palatine mucosa of nine-banded armadillo (Dasypus novemcinctus)

The three-dimensional structure of the lamina propria of the hard and soft palatine mucosa of the nine-banded armadillo was observed by scanning electron microscopy. Sodium hydroxide cell maceration method was applied to demonstrate the architecture of the connective tissue papillae. The palatine mucosa of the armadillo had a triangular shape and measured appr. 6.5 cm length. The hard palate showed 9 transverse palatine plicae while the soft palate was smooth. In the 10% NaOH treated specimens, the lamina propria of the hard palatine mucosa showed numerous connective tissue papillae with a general finger-like shape. These structures were composed by a meshwork of collagen fibers arranged in several directions. on the other hand, the connective tissue papillae of the soft palate mucosa were scattered and small. Numerous openings of glandular ducts with circular or elliptical shape were located in the interplicae area and in the soft palate.

Allergenic extracts from Metarhizium anisopliae: Obtainment and characterization

Metarhizium anisopliae is used as a biopesticide for insects that damage agricultural plantations like sugar cane and forage plants. In a previous study the sensitization to this fungus of asthmatic patients coming from sugar cane areas was showed. The aims of this work were: to compare crude extracts obtained with Tris-HCl and Coca liquid from several growth phases of M. anisopliae concerning the total content of proteins and their electrophoretic analysis profile; to evaluate in vivo allergic sensitization in Balb/c mice and allergic patients from a sugar cane area, and to characterize the allergenic fractions in the sera of patients positive for the prick test by means of Western-blotting. The extract obtained with Coca liquid on the 16(th) day was the one that presented the greatest number of proteic fractions, including all those present in the other extracts. Twelve fractions were verified in this extract with approximate molecular weights from 94 to 14 kDa. The allergenicity of the extract obtained on the 16(th) day was proven by the production of IgE antibodies in Balb/c mice, with titres of 200. Prick tests carried out with the extract of the 16(th) day in 79 atopic individuals (from sugar cane area), 35 atopic individuals (from urban area) and 11 non- atopic individuals showed respective positivity of 29%, 9% and 0%. The allergenic characterization in vitro was performed by means of Western blotting, and the fractions that reacted with the positive individuals' sera were those of approximate molecular weights of 67 kDa (95%); 20 kDa (55%); 94 kDa (36%); 34 and 36 kDa (23%); 43 and 48 kDa (14%): 16 kDa (9%) and 54kDa (5%). It was concluded that the crude allergenic extract, obtained with Coca liquid from the 16(th) day growth of Metarhizium anisopliae, contains allergenic fractions and can be used in diagnostic screening tests.