Anatomia do nervo isquiático em mocós (Kerodon rupestris WIED, 1820) aplicada a clínica de animais silvestres

To know the origin of the ischiatic nerve in mocos (Kerodon rupestris Wied,1820) near by intervertebral forames and the muscling belonging to its routes were used 10 adult animals, from CEMAS-ESAM. After natural obit, they were fixed in formol (10%) and dissected to exposition and to singt of the ischiatic nerve. The results were indicated in percentage. Variations in the quantity of the lumber and sacral vertebras nere observed, five animals (50,00%) reveled seven lumbar vertebras and three sacral ones; two animals recrealed seven lumbar vertebras and four sacral ones, and two animals reveled six lumbar vertebras and three sacral ones. An animal (10,00%) revealed six lumbar vertebras and four ones. Therefore, the origin of the nerve was differentiated five animals (50,00%) had the participation of L 7,S 1,S 2; two animals (20,00%) with L 7,S 1; and a little part of S 2. Two animals (20,00%) with L 6,S 1,S 2, and an animal (10,00%) with L 6,S 1, and a little part of S 2. The last root of the ischiatic nerve in all its origins, contribute to the constitution of the first root of pudental nerve. It was verified that in all its route, the ischiatic nerves (100,00%) ceded branches to the muscles: medial gluteus, deep gluteus, superficial gluteus, emiting muscular branches to the femoral biceps or to thigh, and to the semimembranous and semi-tendinous muscles, that is continuous with a high calibre trunk, originating the fibular nerve(sideways), the tibial nerve(medial) and the lateral plantar sural cutaneous nerve (caudal).

Morfo-anatomia do eixo vegetativo aéreo de Achyrocline alata (Kunth) DC. (Asteraceae)

Achyrocline alata occurs in a dense and low vegetation in Mato Grosso do Sul State, Brazil and it has been studied under physical-chemical and yield aspects, being scarce anatomical data. The present work has as objective the study of the aerial vegetative axis. Stem is cylindrical and hairy, having five wings, which are arisen from their leaves. The blade shows the presence of uniseriate epidermis, which is covered by the cuticle of variable thickness; and non-glandular and glandular trichomes. The non-glandular trichomes are uniseriate and multicellular and have their apex cell in whip form, while the glandular trichomes are multicellular, uniseriate or biseriate. The mesophyll is dorsiventral with uni-stratified palisade parenchyma in most of the cases and lacunal parenchyma formed by three to four layers of irregular cells. Only one collateral vascular bundle occurs in the midvein. Stem in transversal section is covered by epidermis with trichomes similar to leaves; the cortex is constituted by a discontinuous area of angular collenchyma, which is followed by chlorophyll parenchyma. Vascular cylinder that is delimited by pericycle shows vascular bundles of collateral type. In the secondary structure, the periderm is originated from epidermal and subepidermal tissues. In vascular region, the fascicular cambium differs into secondary xylem and phloem, while interfascicular cambium produces sclerenchymatous tissue.

Otimização da distância de extração de madeira com forwarder

The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.

Energia de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.

Variação genética para caracteres anatômicos e retração volumétrica e sua correlação com a densidade básica da madeira em uma população base de Eucalyptus camaldulensis Dehn

Eucalyptus camaldulensis has great importance in Brazil because of their phenotypic plasticity for different environmental conditions, as soils, altitudes and rainfall. This study is an investigation of a base population of E. camaldulensis from Australia through a progeny test implanted in Selvíria, MS. The trial was established in a randomized block design, with 25 families and 60 replications of single tree plots. Genetic parameters for anatomic traits and volume shrinkage were estimated, as well as their correlations with wood basic density. No significant differences among progenies were observed for the traits studied. The additive genetic variation coefficient at individual and among progeny levels ranged from low (0.26%) to high (16.98%). The narrow sense heritability at individual and family means levels also ranged from low (0.01) to high (0.87). This indicates that some traits are under strong genetic control and can be improved by selection. In the present situation, in order to attain the highest genetic gains, the sequential selection among and within progeny would be recommended.

Variação genética para caracteres silviculturais e anatômicos da madeira em progênies de Myracrodruon urundeuva (Engler) Fr. Allem

The aims of this study were to evaluate the variation and to estimate genetic parameters for silvicultural anatomic wood traits for genetic breeding of a Myracrodruon urundeuva (Engler) Fr. Allem, population from Selvíria-MS. For this, from samples of a progeny test established in the Fazenda de Ensino, Pesquisa e Extensão da Faculdade de Engenharia de Ilha Solteira/UNESP, macroscopic anatomic wood traits of M. urundeuva (tangential diameter and vases frequency per mm2) and growth traits were measured (height, DBH and stem form). Genetic parameters were estimated in 28 open-pollinated progenies, in three replications and 10 plants per plot, using a REML/BLUP approach. Between the analysed traits, the DBH is the most indicated for selection for timber production, because it presented the highest values of coefficient of genetic variation, heritabilities and selective accuracy. Between the anatomic traits, the vessels frequency in the pith showed the highest values for genetic parameters. For pulp yield, based on the multi-effect index, the strategy of selecting the best trees for vessels frequency in the pith, independent of the progeny, permitted to obtain substantial gains by mass selection, without progeny test.

Influência do cancro basal em Eucalyptus grandis nas propriedades da madeira e polpação kraft

The objective of this research is to assess the influences of basal canker on wood properties for the kraft pulp production. The material consisted of seeded E. grandis trees classified into 4 levels of basal canker severity (0, 1, 2 and 3) and installed in three soil types classified by texture (AQ1 and AQ2 - 10 to 15% clay, and LEm2 - 26 to 35 clay). The sampling consisted of randomly selecting five trees for each for each canker severity level and soil type, totaling 60 trees (4 canker levels x 3 soil types x 5 trees). These trees were fallen and cut into sections at 0, 25, 50, 75 and 100% of the commercial height for the collection of disk and logs of wood. The results showed that the soil texture influences in the Eucalyptus canker severity and this fact should be considered when assessing the wood properties and their final destination. The texture of the soil and the severe levels of basal canker influence the wood properties, and therefore the kraft pulping.

Utilização de resíduos e derivados de madeira para confecção de uma guitarra elétrica

The residues generation is a quite serious problem in several industrial areas and also in the lumbering area. The search for the elimination or reduction of the volume of generated residues is endless, however limited, resulting in the search for a proper destination or better use, instead of simply burning it. A lot of uses and services are commonly proposed, but with low aggregated value to the residue. This work shows the usage viability of different discarded residues and wood composites in the production of an electric guitar. Cupiúba, ipê and jatobá residues have been used besides wood composites of pinus. The residues and wood composites have shown appropriate resistance, surfacing quality and design terms, and could be used to substitute the traditionally wood used in the production of the instrument as well as in other products of similar characteristics and with larger aggregated value.

Classificação Estrutural e Qualidade da Madeira do Clone GT 1 de Hevea brasiliensis Muell. Arg

Latex is the main product extracted from rubber trees (Hevea brasiliensis). In Brazil, at the end of the production cycle of latex, the wood of rubber tree is traditionally used for energy purposes, but several international studies have reported consolidated practices of adding value to it. The objective of this paper was to evaluate the quality of wood and classify it structurally based on its mechanical properties. Six 20-year-old trees of the clone GT 1 of rubber tree proceeding from Itajobi, State of Sao Paulo, Brazil were sampled. Reduced dimensions specimens in the radial direction of the wood were produced to evaluate the quality by compression parallel to the grain, static bending and Janka hardness tests. Two specimens, one from the lower log (since the ground up to breast height) and one from the higher log (from breast height up to 2.50 m) were produced for structural classification of the wood based on the characteristic strength in compression parallel to the grain (NBR 7190 norm, 1997). The wood was classified as C40 (fc0k ≥ 40 MPa) class. Results revealed that the strength was not statistically different in the radial direction (except for the Janka hardness), though tending to increase from pith to bark.

Anatomia radicial de Mormodes sinuata Rchb. f. & Warm.; (Catasetinae, Cymbidieae: Orchidaceae)

Since there is a lack of information on the root organization of the sub-tribe Catasetinae, current research describes the anatomy of Mormodes sinuata roots and indicate adaptations related to water provision and other taxonomical traits. Five roots of three plants, cut at the median region with a blade, were fixed and preserved in alcohol 5%. Cuts were stained by saffron blue 0.05% and mounted in glycerin. Although the roots have structural characteristics adapted to epiphytism, some anatomic characteristics demonstrate that the species requires more watering or wetter environments when compared with other types of Catasetinae. Root anatomic characteristics foreground results by authors who include the sub-tribe Catasetinae within the tribe Cymbidieae. Further, anatomic characteristics have a generic uniformity and are a tool for the genus's systematics.

Anatomia topográfica e comportamento arterial do pâncreas em cágados Trachemys scripta elegans (wied, 1838)

The turtle Trachemys scripta elegans popularly known as American tiger water are native regions winged Florida and Mississippi, in the United States. We used twenty (20) turtles (Trachemys scripta elegans), adult males and females, which were euthanized under Resolution 714 of June 20, 2002 the Federal Council of Veterinary Medicine (CFMV). After euthanasia were identified aortas right and left to the injection of Neoprene latex 450, stained with specific pigment. To obtain the vinyl mold aorta was injected through the right and left vinyl acetate, followed by corrosion in sulfuric acid. It was observed that the pancreas is closely related to the liver, gizzard, gall bladder, and duodenum. His face cranial this distal region of the pylorus, while its caudal along the cranial region of the duodenum. Anatomically, the pancreas is an elongated body structure featuring a lightly lobed. As to the pancreas arterial vasculature is flushed in its transverse plane of two arteries arising from the celiac artery, and each antimere two pancreaticoduodenal artery in the cranial region, close to the pylorus by the pancreaticoduodenal artery flow in the caudal portion along the duodenum.

Painéis de partículas de madeira leucena e resina poliuretana derivada de óleo de mamona

This research aimed to test particleboard with leucena (Leucaena leucocephala) wood particles and polyurethane resin castor oil based. The response variables are: modulus of rupture (MOR), internal adhesion (AI), apparent density (dap) and wood moisture content (um). The experiments were developed based on the methodological procedures of the ABNT NBR 14810:2002 standard. The particleboards were manufactured by hot-pressing at 4MPa and 90°C, using timber particles with 5% of moisture content and 10% of monocomponent and bicomponent polyurethane resin. The higher moisture content was achieved when the monocomponent polyurethane resin was used. The bicomponent polyurethane resin provided a percent increase of 43.7% and 22.7% on the modulus of rupture and apparent density, respectively, when compared to the standard limit. The internal adhesion of the panels manufactured with monocomponent resin was 2.45 times higher than the standard limit. The confidence interval between means revealed that the internal adhesion and apparent density exhibited statistical equivalence. A good correlation between the internal adhesion and apparent density was found, for this reason it was possible to estimate the internal adhesion of the panels based on the apparent density data.

Características da anatomia foliar e da deposição de gotas de pulverização em plantas daninhas aquáticas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morfo-anatomia de raízes tuberosas de mandioca (Manihot esculenta Crantz) cultivar IAC 576-70 em diferentes preparos do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anatomia do aparelho reprodutor masculino de Dendropsophus minutus e Dendropsophus nanus (Anura, Hylidae) durante o ciclo reprodutivo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)