Estimativa do número de frutos verdes em laranjeiras com o uso de imagens digitais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de cenários para auxílio à tomada de decisão no plantio mecanizado de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Utilização de um algoritmo de caminho mínimo no processo de recolhimento do palhiço da cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Consumo de combustível de um trator agrícola em função do tipo de soloe da pressão de inflação nos pneus utilizando o equipamento canteirador

Agricultural mechanization improved the efficiency of field operations by providing an increase in crop production. The intensified mechanization, however, has led to higher energy use mainly in the area of fuel consumption. The objective of this study was to compare the fuel consumption of tractors using two different tire pressures for two different types of soil during tillage with irrigated cotton in semi-arid regions. These tests were performed at the Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona with a Case 4x2 TDA 88kW equipped with an autopilot system. The results showed lower fuel consumption using a tire pressure of 124 kPa on sandy clay loan soil.

Consumo de combustível de um trator agrícola no preparo do solo para a cultura do algodão irrigado em função da pressão de inflação nos pneus

Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.

Imagens aéreas multiespectrais na identificação de zonas de manejo em áreas de algodão para aplicação localizada de insumos

Crop yield is influenced by several factors with variability in time and space that are associated with the variations in the plant vigor. This variability allows the identification of management zones and site-specific applications to manage different regions of the field. The purpose of this study was the use of multispectral image for management zones identification and implications of site-specific application in commercial cotton areas. Multispectral airborne images from three years were used to classify a field into three vegetation classes via the Normalized Difference Vegetation Index (NDVI). The NDVI classes were used to verify the potential differences between plant physical measurements and identify management zones. The cotton plant measurements sampled in 8 repetitions of 10 plants at each NDVI class were Stand Count, Plant Height, Total Nodes and Total Bolls. Statistical analysis was performed with treatments arranged in split plot design with Tukey’s Test at 5% of probability. The images were classified into five NDVI classes to evaluate the relationship between cotton plant measurement results and sampling location across the field. The results have demonstrated the possibility of using multispectral image for management zones identification in cotton areas. The image classification into three NDVI classes showed three different zones in the field with similar characteristics for the studied years. Statistical differences were shown for plant height, total nodes and total bolls between low and high NDVI classes for all years. High NDVI classes contained plants with greater height, total nodes and total bolls compared to low NDVI classes. There was no difference in Stand Count between low and high NDVI classes for the three studied years. The final plant stand was the same between all NDVI classes for 2001 and 2003 as it was expected due to the conventional seeding application with the same rate of seeds for the entire field.

Avaliação de um sensor de resistencia eletrica e sua correlação com atributos do solo

The electrical measures of the soil have been used as variables that correlate with its characteristics. This study aimed at developing an electrical capacitance sensor of low cost, to evaluate its performance on the field and verify the correlation between the measurements of electrical capacitance with physical properties (sand, silt and clay) and chemical properties of soil (pH, MO, P resin, H + Al, K, Ca, Mg, SB, CTC and V%) and the moisture content. The data sampling was performed at the farm named "Capão da Onça" which belongs to the State University of Ponta Grossa. The samples collection was conducted in an area of approximately 13 hectares, totalizing 81 samples. In each sampling the electrical capacitance of the soil was measured. After the sensor withdrawal, soil samples were collected and sent to be analysed in the laboratory of the College of Agronomics Science of the Paulista State University. The measuring instrument used to collect data on electric capacitance of the soil a digital multimeter was used. The data were submitted to the analysis of correlation and regression. The developed system presented a low cost and it was capable to measuring variation of the electrical capacitance of the soil. The obtained measures satisfactorily correlated with the levels of clay and sand, and weakly with the moisture content. This had demonstrated the possibility to use a sensor to verify the soil texture in not homogeneous areas. The measures of the electrical capacitance of the soil obtained by the sensor had significantly correlated with the soil attributes: calcium, magnesium, pH, SB and CTC. These results had demonstrated the possibility to use a sensor for soil fertility control.

Análise Espacial Multivariada Aplicada na Avaliação da Fertilidade do Solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perdas na colheita mecanizada de algodão em variabilidade espacial e em função de velocidades de colheita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho operacional de semeadora-adubadora de precisão em função do tipo de martelete e velocidade de deslocamento na cultura do milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Precisão de planta planialtimétrica gerada por modelagem numérica de superfície a partir de coordenadas UTM plano retangulares coletadas em receptor GPS topográfico

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Caracterização de novos isolados de Bacillus thuringiensis para o controle de importantes insetos-praga da agricultura

A bactéria Bacillus thuringiensis Berliner produz um corpo de inclusão paraesporal (cristal) de natureza proteica, formado durante a esporulação, que atua de forma eficiente no controle de insetos-praga de culturas economicamente importantes. Esse cristal é constituído de proteínas Cry, que são codificadas pelos genes cry; um isolado pode ser caracterizado pelo conteúdo de genes cry que apresenta. Visando caracterizar novos isolados no combate de insetos-praga pertencentes às ordens Lepidoptera e Coleoptera, 76 isolados bacterianos foram analisados molecularmente e tiveram seu potencial de controle avaliado por meio de bioensaios com larvas de Spodoptera frugiperda (J.E. Smith), Sphenophorus levis Vaurie e Tenebrio molitor Linnaeus. As análises moleculares indicaram 11 isolados (14,5% da coleção), contendo genes lepidóptero-específicos e 17 (22,37%) com genes coleóptero-específicos. As análises de patogenicidade revelaram dois isolados com alto potencial de controle para lagartas de S. frugiperda, um para larvas de S. levis e seis prejudiciais ao desenvolvimento das larvas de T. molitor. Esses isolados de B. thuringiensis podem ser promissores no controle biológico das referidas pragas.

Leaf area prediction models for Zinnia elegans Jacq., Zinnia haageana regel and 'profusion cherry'

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Precisão da técnica de absorciometria de raios-x de dupla energia na determinação da composição corporal em gatos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agricultura familiar, multifuncionalidade da agricultura e ruralidade: interfaces de uma realidade complexa

The last decades witnessed the revitalization of the debate around family farming with the addition of discussions regarding the multiple functions of agriculture, given the fact that rural areas are longer devoted exclusively to agricultural activities. In the Brazilian context, we believed that this debate must be permeated by analyses of how differentiated processes of land distribution and economic development, and the resulting types of agriculture, generate specific ruralities with characteristics such as, in the case of family farming, the maintenance of social and work practices marked by the relations among relatives and neighbours. It is in this light that this research analyses family agriculture in a rural area of Ouro Fino-MG, its historical heritage, and its participation in the creation of a physical and human landscape that greatly contributes to the attractiveness of the region.