106 resultados para 478
Resumo:
The Auditory Evoked Middle Latency Response is one of the most promising objective tests in audiology and in revealing brain dysfunction and neuro-audiologic findings. The main advantages of its clinical use are precision and objectivity in evaluating children. This study aimed to analyze the auditory evoked middle latency response in two patients with auditory processing disorder and relate objective and behavioral measures. This case study was conducted in 2 patients (P1 = 12 years, female, P2 = 17 years old, male), both with the absence of sensory abnormalities, neurological and neuropsychiatric disorders. Both were submitted to anamnesis, inspection of the external ear canal, hearing test and evaluation of Auditory Evoked Middle latency Response. There was a significant association between behavioral test and objectives results. In the interview, there were complaints about the difficulty in listening in a noisy environment, sound localization, inattention, and phonological changes in writing and speaking, as confirmed by evaluation of auditory processing and Auditory Evoked Middle Latency Response. Changes were observed in the right decoding process hearing in both cases on the behavioral assessment of auditory processing; auditory evoked potential test middle latency shows that the right contralateral via response was deficient, confirming the difficulties of the patients in the assignment of meaning in acoustic information in a competitive sound condition at right, in both cases. In these cases it was shown the association between the results, but there is a need for further studies with larger sample population to confirm the data.
Resumo:
In this work of tensile strength was evaluated the efficacy of 4 cements (S. S. White zinc phoshate, Ketac Cem Easymix glass ionomer, RelyX Luting 2 composite resin/glass ionomer and Panavia 21 TC special acrylic resin) used to fix NiCr crowns to usinated titanium alloy abutments. Were used 40 abutments distributed in groups of 10 elements, to each material. The mechanical essays were developed at a MTS 810 universal machine, adjusted to a 0.5 mm/m velocity. The ANOVA applied to data pointed out the existence of significant differences between groups; the subsequent Tukey´s test (p<0.05) also detected significant differences, except at comparisons of phosphate versus RelyX and phosphate versus Ketac Cem. The better performance was presented by Panavia 21 (1,127.996 N); RelyX (478.197 N) showed itself similar only to phosphate (430.662 N), wich had a performance similar to that of Ketac Cem (227.705 N).
Resumo:
This study has as main aim to discuss the motivation for the non-occurrence of epenthetic vowel at the beginning of the word in the context of word junction in the first hundred Cantigas de Santa Maria (CSM – Afonso X, 1221-1284). Through this work and from a non-explored corpus (especially as for linguistic themes - SNOW, 1987, p. 478-480; MASSINI-CAGLIARI, 2005, p. 24-26), we intended to contribute to reaching a deeper knowledge of Portuguese prosody history in the period of its recognition as an “independent” language in relation to Latin.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
To evaluate the effectiveness of isopropyl alcohol, saline or distilled water to prevent the precipitate formed between sodium hypochlorite (NaOCl) and chlorhexidine (CHX) and its effect on the bond strength of an epoxy-based sealer in radicular dentine. Methodology The root canals of 50 extracted human canines (n = 10) were instrumented. In G1, root canals were irrigated with 17% EDTA and 2.5% NaOCl; G2, as G1, except that 2% CHX was used as the final irrigant. In the other groups, intermediate flushes with isopropyl alcohol (G3), saline (G4) or distilled water (G5) were used between NaOCl and CHX. The specimens were submitted to SEM analysis to evaluate the presence of debris and smear layer, in the apical and cervical segments. In sequence, fifty extracted human canines were distributed into five groups (n = 10), similar to the SEM study. After root filling, the roots were sectioned transversally to obtain dentine slices, in the cervical, middle and apical thirds. The root filling was submitted to a push-out bond strength test using an electromechanical testing machine. Statistical analysis was performed using Kruskal–Wallis and Dunn's tests (α = 5%). Results All groups had similar amounts of residue precipitated on the canal walls (P > 0.05). The push-out bond strength values were similar for all groups, independently of the root third evaluated (P > 0.05). Conclusions Isopropyl alcohol, saline and distilled water failed to prevent the precipitation of residues on canal walls following the use of NaOCl and CHX. The residues did not interfere with the push-out bond strength of the root filling.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Ensino Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This study evaluated the in vitro enamel remineralization capacity of experimental composite resins containing sodium trimetaphosphate (TMP) combined or not with fluoride (F). Bovine enamel slabs were selected upon analysis of initial surface hardness (SH1) and after induction of artificial carious lesions (SH2). Experimental resins were as follows: resin C (control-no sodium fluoride (NaF) or TMP), resin F (with 1.6 % NaF), resin TMP (with 14.1 % TMP), and resin TMP/F (with NaF and TMP). Resin samples were made and attached to enamel slabs (n = 12 slabs per material). Those specimens (resin/enamel slab) were subjected to pH cycling to promote remineralization, and then final surface hardness (SH3) was measured to calculate the percentage of surface hardness recovery (%SH). The integrated recovery of subsurface hardness (ΔKHN) and F concentration in enamel were also determined. Data was analyzed by ANOVA and Student-Newman-Keuls test (p < 0.05). Resins F and TMP/F showed similar SH3 values (p = 0.478) and %SH (p = 0.336) and differed significantly from the other resins (p < 0.001). Considering ΔKHN values, resin TMP/F presented the lowest area of lesion (p < 0.001). The presence of F on enamel was different among the fluoridated resins (p = 0.042), but higher than in the other resins (p < 0.001). The addition of TMP to a fluoridated composite resin enhanced its capacity for remineralization of enamel in vitro. The combination of two agents with action on enamel favored remineralization, suggesting that composite resins containing sodium trimetaphosphate and fluoride could be indicated for clinical procedures in situations with higher cariogenic challenges.
Resumo:
Each year individuals have sought a better quality of life and work, in this case, the science of Bio-insurance needs to keep up with technological advances and the needs of society to minimize or eliminate the risks of accidents. This study evaluated the most common accidents involving health staff from 2007 to 2011 in Araçatuba-SP. 478 accidents were recorded, and 78.7% with percutaneous involvement, 9% with intact skin, 4% with no skin intact, with 7.3 mucous and 1.05% other types of exposures. Most accidents were caused by needles with lumen (68.0%), followed by other agents (14.1%), accidents with blades (8.5%) or needles without lumen (5.5%); 3.7% did not answer and 0.2% were accidents with glasses. When checking the condition in which the accident occurred, 26.0% did not specify, 25.1% occurred in the disposal and / or handling sharp objects, 12.0% at the time of drug administration, 6.9% puncture, 3.7% occurred during recapping the needle. These data show that the most common accidents are those involving needles with lumen and / or sharp objects and due to these factors, the industry of health materials have sought alternatives to minimize such accidents as needles with protective, vacuum collection . Thus, it appears that reporting accidents is important for the development of technical and / or safer materials for patients and health workers.
Resumo:
The air part of the cassava is a residue which presents possibilities of being used as a non-wooden raw material in the production of pulp due to the fact that its 81 % of the adult plants air part, besides having high availability and presenting a high concentration of fibers. Studies were developed with the purpose of producing the pulps through the kraft process, which is a mix of the Na2S and NaOH in water heated up to the temperature of 160º C for about 90 minutes to the extraction of lignin. The paper sheets obtained in the practices went through an experimenting process. Studies related to the paper characteristics were accomplished in order to assess its use in the visual communication through printing techniques, silk screen, pictures and others graphical processes. The research results are able to conclude the utilization viability of this material in graphics communication.
Resumo:
The main aim of this work was to study the simultaneous wear-corrosion of titanium (Ti) in the presence of biofilms composed of Streptococcus mutans and Candida albicans. Both organisms were separately grown in specific growth media, and then mixed in a medium supplemented with a high sucrose concentration. Corrosion and tribocorrosion tests were performed after 48 h and 216 h of biofilm growth. Electrochemical corrosion tests indicated a decrease in the corrosion resistance of Ti in the presence of the biofilms although the TiO2 film presented the characteristics of a compact oxide film. While the open circuit potential of Ti indicated a tendency to corrosion in the presence of the biofilms, tribocorrosion tests revealed a low friction on biofilm covered Ti. The properties of the biofilms were similar to those of the lubricant agents used to decrease the wear rate of materials. However, the pH-lowering promoted by microbial species, can lead to corrosion of Ti-based oral rehabilitation systems.
Resumo:
Departing from a Merleau-Pontyan concept of linguistic mediation of perception, we ran a cognitive experiment, having the goal of studying how the perception of ambiguous figures is expressed in verbal linguage. Two of the figures mix biological and technological forms, while the third mixes two biological forms. We asked a group of a 120 undergraduate Biology students from State University of São Paulo (UNESP) to write about their perception of three ambiguous figures. We made an analysis of descriptive categories that appeared in the responses and used a qualitative method (Discourse of the Collective Subject) to reconstruct the main features of the linguistic expression of preceptual processes. In conclusion, we found in these.
Resumo:
The objectives of this study were to evaluate land use and occupation of Permanent Preservation Areas (PPA) as well as its use conflicts by TM (Thematic Mapper) image of the 2010 Landsat-5 satellite, according to the Forest Code. For that purpose, Geographic Information Systems in the Ribeirão Paraíso watershed, São Manuel, SP were used. The combination of Remote Sensing and Geographic Information System technologies allowed representation of spatial distribution of the landscape and data integration in the diagnosis of geographic interest. The 2010 mapping showed 12 use categories, and the sugar cane crop had the largest land occupation, 48.25% of the area. The areas of permanent preservation amounted to 925.74 ha, which is an ideal value based on the Brazilian legislation. Mapping of land use conflicts showed intensive anthropic actions going 80.13% forward on PPAs, with only 19.87% remaining forests, which highlights their negative impact and illegal situations in these areas.