Produtividade de cana-de-açúcar sob adubação com torta de filtro enriquecida com fosfato solúvel

Phosphorus is considered an essential element for plants and it is found in small amounts in Brazilian soils. The filter cake residue, composed of a mixture of bagasse and decanting sludge, has high levels of organic matter, phosphorus and calcium. The phosphorus present in the filter cake is organic, and its release, as it happens to the nitrogen, occurs gradually by mineralization and by microorganisms attack in the soil. This study aimed to evaluate sugarcane vegetative growth and yield under fertilization with filter cake enriched with soluble phosphate. The experiment was carried out in Presidente Prudente, São Paulo State, Brazil, by using a randomized complete block design, in a 5x4 factorial scheme, where the first factor consisted of filter cake doses (0 t ha-1, 0.5 t ha-1, 1.0 t ha-1, 2.0 t ha-1, and 4.0 t ha-1) and the second of phosphorus fertilizer doses (0 kg ha-1, 50 kg ha -1, 100 kg ha-1, and 200 kg ha-1 of P 2O5), with 4 repetitions, totalizing 80 plots. The experiment evaluated the tiller number, at 30, 60, 90, and 120 days after planting, oBrix, and yield. The stalk yield and tillering were influenced by the filter cake rates applied to the soil. Filter cake doses and their combination with phosphate did not change the juice quality (Brix) at harvest.

Using serial bluetooth converters as a sensor link in networked control systems

Networked control systems (NCS) are distributed control system in which sensors, actuators and controllers are physically separated and connected through communication networks. NCS represent the evolution of networked control architectures providing greater modularity and control decentralization, ease maintenance and diagnosis and lower cost of implementation. A recent trend in this research topic is the development of NCS using wireless networks which enable interoperability between existing wired and wireless systems. This paper presents the feasibility analysis of using a serial RS-232 to Bluetooth converter as a wireless sensor link in NCS. In order to support this investigation, relevant performance metrics for wireless control applications such as jitter, time delay and messages lost are highlighted and calculated to evaluate the converter capabilities. In addition the control performance of an implemented motor control system using the converter is analyzed. Experimental results led to the conclusion that serial RS-232 Bluetooth converters can be used to implement wireless networked control systems (WNCS) providing transmission rates and closed control loop times which are acceptable for NCS applications. © 2011 IEEE.

In Vitro Susceptibility of Environmental Isolates of Exophiala dermatitidis to Five Antifungal Drugs

Several dematiaceous fungi frequently isolated from nature are involved in cases of superficial lesions to lethal cerebral infections. Antifungal susceptibility data on environmental and clinical isolates are still sparse despite the advances in testing methods. The objective of this study was to examine the activities of 5-flucytosine, amphotericin B, itraconazole, voriconazole and terbinafine against environmental isolates of Exophiala strains by minimum inhibition concentration (MIC) determination. The strains were obtained from hydrocarbon-contaminated soil, ant cuticle and fungal pellets from the infrabuccal pocket of attine gynes. Broth microdilution assay using M38-A2 reference methodology for the five antifungal drugs and DNA sequencing for fungal identification were applied. Terbinafine was the most active drug against the tested strains. It was observed that amphotericin B was less effective, notably against Exophiala spinifera, also studied. High MICs of 5-flucytosine against Exophiala dermatitidis occurred. This finding highlights the relevance of studies on the antifungal resistance of these potential opportunistic species. Our results also contribute to a future improvement of the standard methods to access the drug efficacy currently applied to black fungi. © 2012 Springer Science+Business Media Dordrecht.

Avaliação clínico-laboratorial de cães com doença renal crônica sob tratamento com o antioxidante N-acetilcisteína

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impacto das doenças cardiovasculares no serviço público: análise de custos

Pós-graduação em Bases Gerais da Cirurgia - FMB

Modelos para estimar exigências de treonina digestível para poedeiras comerciais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de dois sistemas de soldagem na alteração dimensional nas ligas de cobalto-cromo verificado por meio de análise por extensometria linear elétrica e resistência à flexão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e aplicação eletroanalítica de complexos metálicos formados a partir de titânio (IV) e ácido fosfórico seguindo uma nova rota de síntese

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da imunomarcação de células-tronco tumorais em carcinossarcomas mamários e carcinomas em tumores mistos em cadelas

Cancer stem cells belong to a small population of cells within the tumor with properties of self-renewal and differentiation into other cell types. In this study, the behavior of both portions, mesenchymal and epithelial, was evaluated. Six carcinosarcomas (CSs), 11 carcinomas within mixed tumors (CWMTs) grade I, 11 grade II, and 10 grade III were evaluated. In the epithelial portions of the CS and CWMTs was observed immunostaining for antibodies CD44, CD24, Oct-4 and ALDH-1. In the mesenchymal portions of the CS, in the epithelial portions of CMTs grades II and III no immunostaining for ALDH-1 was found. It was concluded that the tumor stem cells are expressed in equal proportions in the epithelial and mesenchymal portions of the CS. No immunostaining in the mesenchymal portions of well-differentiated CWMTs was seen.

Gestão de recursos humanos e manufatura enxuta: evidências empíricas do setor automotivo brasileiro

The aim of this paper is to verify whether the practices of human resource management have a positive influence on the adoption of lean manufacturing practices in Brazilian companies in the automotive sector. To this aim, we proposed a framework linking these concepts to the proposed research hypothesis. Data collected from 75 companies were analyzed using structural equation modeling. The research demonstrates that human resource management indeed tends to influence the adoption of lean manufacturing practices in a weak-moderate manner.

Temporal and Spatial Variability of Limnological Characteristics in Areas under the Influence of Tilapia Cages in the Chavantes Reservoir, Paranapanema River, Brazil

The influence of tilapia cages on limnological characteristics of the Chavantes Reservoir, Paranapanema River, Brazil, was investigated in March and June 2007. Principal components analysis was used to compare the transparency; dissolved oxygen; temperature; total organic nitrogen, phosphorus, and dissolved solids; chlorophyll aand electrical conductivity of fish farm 1 (239.3m.t.), 2 (461.5m.t.) and areas without cages, in the lacustrine and river-reservoir transition regions. The variables differentiated the regions and areas with and without cages. In March, in the lacustrine region, there was a thermal and chemical stratification, and in the transition region, there was a temperature and oxygen reduction gradient between the surface and bottom that was also observed in June in fish farm 1. The higher transparency confirmed the increased light penetration in the lacustrine region. In the transition region, there were higher turbidity, total dissolved solid, and conductivity values that are likely related to allochthonous material flow and transport. In fish farms, lower oxygen and pH values indicate intense decomposition and respiration. The generally higher total dissolved solid and nutrient values, turbidity, and conductivity and the lower transparency in one or both fish farms indicate their contribution to eutrophication, demonstrating the need for careful monitoring.

Risk factors for anaplasmosis in dairy cows during the peripartum

Anaplasma marginale is endemic in tropical and subtropical areas around the world. Some studies have suggested that cows during peripartum may present a transient immunosuppression state and development of clinical signs of anaplasmosis. The aim of this study was to investigate the relationship between some risk factors and the seroprevalence of A. marginale in dairy cows during peripartum in Rio de Janeiro, Brazil. The risk factors analyzed in association with the prevalence of antibodies against A. marginale in dairy cows were calving season, reproductive experience, breed standard, tick infestations, stocking density, and milk yield. The antibodies against A. marginale were tested in indirect enzyme-linked immunosorbent assays. A primary screening using a 2 x k contingency table of the exposed variables with the outcomes was performed. All variables for which p < 0.20 were included in a fixed effects log regression. The risk factors investigated to anaplasmosis were calving (OR 2.61, IC 1.08-7.63), breed standard (OR 3.83, IC 0.08-0.28), reproductive experience (OR 33.7, IC 2.14-5.16), milk yield (OR 3.9, IC 2.24-7.03), Rhipicephalus microplus infestations (OR 10.3, IC 0.05-0.17), and stocking density (OR 22.3, IC 0.05-0.17). Low titers of antibodies against A. marginale during peripartum had been characterized as a period previous to development of clinical anaplasmosis. Thus, studies on anaplasmosis should consider each farm as an epidemiological unit, where environmental and immunological factors may influence the endemic status of the pathogen.

Bond Strength of Different Resin Cement and Ceramic Shades Bonded to Dentin

Purpose: To evaluate the microtensile bond strength (MTBS) of ceramic cemented to dentin varying the resin cement and ceramic shades.Materials and Methods: Two VITA VM7 ceramic shades (Base Dentine 0M1 and Base Dentine 5M3) were used. A spectrophotometer was used to determine the percentage translucency of ceramic (thickness: 2.5 mm). For the MTBS test, 80 molar dentin surfaces were etched and an adhesive was applied. Forty blocks (7.2 x 7.2 x 2.5 mm) of each ceramic shade were produced and the ceramic surface was etched (10% hydrofluoric acid) for 60 s, followed by the application of silane and resin cement (A3 yellow and transparent). The blocks were cemented to dentin using either A3 or transparent cement. Specimens were photoactivated for 20 s or 40 s, stored in distilled water (37 degrees C/24 h), and sectioned. Eight experimental groups were obtained (n = 10). Specimens were tested for MTSB using a universal testing machine. Data were statistically analyzed using ANOVA and Tukey's post-hoc tests (alpha <= 0.05).Results: The percentage translucency of 0M1 and 5M3 ceramics were 10.06 (+/- 0.25)% and 1.34 (+/- 0.02)%, respectively. The lowest MTBS was observed for the ceramic shade 5M3. For the 0M1 ceramic, the A3 yellow cement that was photocured for 20 s exhibited the lowest MTBS, while the transparent cement that was photocured for 40 s presented the highest MTBS.Conclusions: For the 2.5-mm-thick 5M3 ceramic restorations, the MTBS of ceramic cemented to dentin significantly increased. The dual-curing cement Variolink II photocured for 40 s is not recommended for cementing the Base Dentine 5M3 feldspathic ceramic to dentin.

Biocompatibility studies of natural rubber latex from different tree clones and collection methods

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Revisão sistemática acerca das políticas de educação inclusiva para a formação de professores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)