Patterns of honey storage in nests of the neotropical paper wasp Polistes simillimus Zikán, 1951 (Hymenoptera, Vespidae)

This study describes, for the first time, the occurrence of two patterns of honey storage in nests of the paper wasp Polistes simillimus. During the period of January of 1997 to September of 2000 we visited 262 colonies of P. simillimus, found at several places in States of São Paulo and Minas Gerais, in the southeast region of Brazil. Only in 2.67% of the colonies of P. simillimus searched presented the behavior of honey storage. Two of these colonies were in the pre-emergency phase, two in the post-emergency and three in decline. The results suggest that the honey storage can be correlated with the number of present individuals in the colony, because the colonies in decline, with larger number of individuals, presented many more cells occupied with honey than the nests in pre and post-emergency. There was not a pattern for the distribution of the cells with honey in the nests in decline. The honey storage in the colonies in pre and post-emergency of P. simillimus, suggests a strategy to increase success of foraging activity in the function of parental care. Already for the colonies in decline, this strategy seems to be associated with the individuals' survival in the aggregation, since the wasps are awaiting the passage of the unfavorable climatic conditions for the dispersion and foundation of new colonies.

Effect of diclofenac sodium on the healing process of end-to-end anastomosis in carotid arteries of rabbits. Histopathological and biomechanical studies

Aim. Diclofenac sodium is a non-steroidal anti-inflammatory drug commonly used to attenuate painful inflammatory reactions in surgery. However, it may delay healing in the skin and gastrointestinal tract. The aim of this study was to evaluate the influence of Diclofenac in vascular healing. Methods. Ninety rabbits had their carotid arteries sectioned and reconstructed by end-to-end anastomosis with interrupted sutures. The animals were randomly allocated into 3 groups of 30 each and treated by intramuscular route with saline (control), 5 mg/kg/day of diclofenac sodium (DS-5), and 10 mg/kg/day of diclofenac sodium (DS-10). Treatment began on the day of surgery and lasted 4 days. Angiography, biomechanical properties (failure load, failure elongation, yield point, yield point elongation, and stiffness were obtained from the load/elongation curve), macroscopic and histological examinations (hematoxylin-eosin, Masson, Calleja, Picrossirius-red), and scanning electron microscopy were studied in both arteries on the 3rd and 15th postoperative days. Results. No significant differences in biomechanical properties were observed either in the 3 groups or the experimental times. The carotid artery healing process was similar in the 3 groups. Conclusion. Diclofenac sodium did not cause alterations nor delayed carotid artery healing.

Tolerância de perdas de solo na bacia do rio Itiquira, Mato Grosso, Brasil

The geographic area of the present study corresponds to the basin of the Itiquira river high course (Figure 1), in the portion that extends from the tributaries of its source, in the east of the plateau Correntes/Itiquira, in the neighbourhoods the city of Alto Garç as, to the scarp of the São Jerônimo mountain range, toward the west of Itiquira, in the state of Mato Grosso, totalizing 5,361 km 2. The area is placed in the eastern part of the Alto Paraguai basin, in the western portion of the Paraná Sedimentary Basin plateau. Through GIS techniques, it was possible to asses total soil losses from the Itiquira river basin, considering the years of 1966, 1985 and 1996, being based on the Universal Soil Loss Equation. Thus, in 1966 the basin lost 201,546.94 ton of soil, with an average loss of 0.37 ton/ha/year. Considering that the total area of the Itiquira river basin is of 536,100 ha, while in 1985 the soil losses had passed to 1,760,833.40 ton, with an increase of approximately 8.5 times. The average of soil losses in 1985 was of 3.28 ton/ha/year. In 1996 the basin lost 1,662,043.24 ton, with a reduction of only 9.4% in relation to 1985 but, in relation the 1966, the increase continued in the order of 8 times. The average losses per hectare in this year was in the order of 3.10 ton/ha/year (Chart 1). The map of potential of the laminar erosion for 1966 (Figure 3), shows to the highest values in small areas, situated in the northeast of the area, in Alto Garças, with values between 10 the 20 ton/ha/year and some spots in sources of the Itiquira and Ariranha rivers, with values between 1 the 5 ton/ha/year. In a general way, however, the area presents low soil loss for laminar erosion in this year, with inferior values to 1 ton/ha/year. The higher class of erosion, over 10 ton/ha/year, occupied 2,947 ha in 1966. In the year of 1985 (Figure 4), the erosive process spread over the entire studied area, and the class of erosion over of 10 ton/ha/year, already started to occupy 78,437 ha, implying an increase of approximately 27 times in 19 years. A strong increment in the erosive process was noticed in the western part of the area, to along the BR-163 road, exactly where great areas of natural vegetation (open pasture) had been transformed in culture and pasture areas. In the north-eastern part of the area it was also noticed an increment in the erosive process in agreement with the increase of culture areas and reduction of the natural areas, but it was not of so intense form as in the western portion of the area. In the year of 1996 (Figure 5), the class of erosion over of 10 ton/ha/year had diminished for a total of 53.499 ha noticing a retraction of the erosive process in the western part of the area, alongside the BR-163 road. On the other hand, it occurred a strong increment in the northern part of the area, in the neighbourhoods of the city of Alto Garças, alongside the BR-364 road and part of the MT-040 road. In a general way, in the outskirts of the city of Itiquira, in the central part of the area, it was verified an increase of the amount of zones with erosion between 0-1 ton/ha/year, passing to the immediately superior class, of 1-3 ton/ha/year; scarce data of hydrosedimentology in the UHE Itiquira (1999), shows good agreement with the values gotten for the EUPS (Chart 2). Based on the hydric classification proposal for FAO (1967) (Chart 3), it is noticed that areas with high degree of erosion (> 50) in the analysed area are very restricted, occupying 493 ha in 1985 and 332 ha in 1996 (Chart 4). In 1996 appeared as isolated spots in the north of Itiquira and Alto Garças, however beyond limits of the Itiquira river basin. These areas require special cares in its use as agricultural areas. Aiming at identifying and indicating the areas of potential risk of erosion and that need implementation of conservation practices, it was elaborated the map of limit of tolerance to the soil losses. In 1966 (Figure 6), areas with soil losses over of the tolerable were restricted to small spots located in the eastern part of the area, occupying 0.43% of the total of the area; already in 1985 (Figure 7), this percentage passed to 5.86%, spreading for all the area; in 1996 (Figure 8) it is observed a fast reduction of the areas with soil losses over of the tolerance limit, passing 5.43% of the total of the area. All the areas with losses over of the tolerable value must be considered as risk areas and were done in these areas studies for implementation of conservation practices.

Competition between humic substances and α-amino acids by metal species

The aim of the present work was to carry out experimental comparison between humic substances (HS) and representative α-amino acids (methionine, methionine sulfoxide and cysteine hydrochloride) in relation to the complexation of biologically active trace elements (Al, Cu, Pb, Mn, Zn, Cd and Ni). A mobile time-controlled tangential-flow UF technique was applied to differentiate between HS-metal and α-aminoacids-metal complexes. Metal determinations were conventionally carried out using a ICP-OES. The results showed that HS may be considered as a selective complexing agents with higher metal bonding capability in relation to Al, Cu and Pb, the fact that may be clinically important.

Robust control to parametric uncertainties in smart structures using linear matrix inequalities

The study of algorithms for active vibrations control in flexible structures became an area of enormous interest, mainly due to the countless demands of an optimal performance of mechanical systems as aircraft and aerospace structures. Smart structures, formed by a structure base, coupled with piezoelectric actuators and sensor are capable to guarantee the conditions demanded through the application of several types of controllers. This article shows some steps that should be followed in the design of a smart structure. It is discussed: the optimal placement of actuators, the model reduction and the controller design through techniques involving linear matrix inequalities (LMI). It is considered as constraints in LMI: the decay rate, voltage input limitation in the actuators and bounded output peak (output energy). Two controllers robust to parametric variation are designed: the first one considers the actuator in non-optimal location and the second one the actuator is put in an optimal placement. The performance are compared and discussed. The simulations to illustrate the methodology are made with a cantilever beam with bonded piezoelectric actuators.

Estudo quantitativo da lágrima pelo teste de fenol vermelho na população brasileira

Purpose: To detect normal values of red phenol thread test in the Brazilian population and compare it between different races, age and sex. Methods: 280 white individuals (560 eyes) and 280 non-white individuals (560 eyes) were analyzed regarding sex and age, and analyzed using the Phenol Red test. Individuals with ocular diseases, contact lens or ocular drug users were excluded from this study. Results: Of the 1,120 evaluated eyes, the mean ± standard deviation result was 19,77±7,90 mm. Conclusion: The mean result found in this study was an intermediate value compared to the previously studied populations (Japanese and American).

Chorismate synthase: An attractive target for drug development against orphan diseases

The increase in incidence of infectious diseases worldwide, particularly in developing countries, is worrying. Each year, 14 million people are killed by infectious diseases, mainly HIV/AIDS, respiratory infections, malaria and tuberculosis. Despite the great burden in the poor countries, drug discovery to treat tropical diseases has come to a standstill. There is no interest by the pharmaceutical industry in drug development against the major diseases of the poor countries, since the financial return cannot be guaranteed. This has created an urgent need for new therapeutics to neglected diseases. A possible approach has been the exploitation of the inhibition of unique targets, vital to the pathogen such as the shikimate pathway enzymes, which are present in bacteria, fungi and apicomplexan parasites but are absent in mammals. The chorismate synthase (CS) catalyses the seventh step in this pathway, the conversion of 5-enolpyruvylshikimate-3-phosphate to chorismate. The strict requirement for a reduced flavin mononucleotide and the anti 1,4 elimination are both unusual aspects which make CS reaction unique among flavin-dependent enzymes, representing an important target for the chemotherapeutic agents development. In this review we present the main biochemical features of CS from bacterial and fungal sources and their difference from the apicomplexan CS. The CS mechanisms proposed are discussed and compared with structural data. The CS structures of some organisms are compared and their distinct features analyzed. Some known CS inhibitors are presented and the main characteristics are discussed. The structural and kinetics data reviewed here can be useful for the design of inhibitors. © 2007 Bentham Science Publishers Ltd.

Analysis of the distances covered by first division Brazilian soccer players obtained with an automatic tracking method

Methods based on visual estimation still is the most widely used analysis of the distances that is covered by soccer players during matches, and most description available in the literature were obtained using such an approach. Recently, systems based on computer vision techniques have appeared and the very first results are available for comparisons. The aim of the present study was to analyse the distances covered by Brazilian soccer players and compare the results to the European players', both data measured by automatic tracking system. Four regular Brazilian First Division Championship matches between different teams were filmed. Applying a previously developed automatic tracking system (DVideo, Campinas, Brazil), the results of 55 outline players participated in the whole game (n = 55) are presented. The results of mean distances covered, standard deviations (s) and coefficient of variation (cv) after 90 minutes were 10,012 m, s = 1,024 m and cv = 10.2%, respectively. The results of three-way ANOVA according to playing positions, showed that the distances covered by external defender (10642 ± 663 m), central midfielders (10476 ± 702 m) and external midfielders (10598 ± 890 m) were greater than forwards (9612 ± 772 m) and forwards covered greater distances than central defenders (9029 ± 860 m). The greater distances were covered in standing, walking, or jogging, 5537 ± 263 m, followed by moderate-speed running, 1731 ± 399 m; low speed running, 1615 ± 351 m; high-speed running, 691 ± 190 m and sprinting, 437 ± 171 m. Mean distance covered in the first half was 5,173 m (s = 394 m, cv = 7.6%) highly significant greater (p < 0.001) than the mean value 4,808 m (s = 375 m, cv = 7.8%) in the second half. A minute-by-minute analysis revealed that after eight minutes of the second half, player performance has already decreased and this reduction is maintained throughout the second half. ©Journal of Sports Science and Medicine (2007).

Avaliação de desempenho do microaspersor amanco em bancada de testes

The need for a rational use of water and supply of food for a growing world population have led to the development of research in the area of irrigation systems. Thus, some irrigation systems which join efficiency with low cost of material have been developed. Although some technical characteristics are provided by the manufacturers, tests are required to verify functioning of the system and uniformity of water distribution. Continuous research on uniformity, characteristics of the materials and design of water distribution systems is essential for system improvement. Therefore, the objective of this work was to evaluate the CV (manufacturer's coefficient of variation) of Amanco microsprinkler (1.0 mm light green nipple) using bench testing in the laboratory of Irrigation at UNESP - FCA campus of Botucatu-SP. Twenty-five microsprinklers in a sequential design were used in the tests. Three flow systems were tested as follows: a Coil system based on serial connected pipes; a Lateral system, the most common system in which secondary lines are fed by a main line; and a Mesh system used in the urban water supply. The results showed that 4.17% CVf met the production standards and the Lateral and Mesh systems were similar regarding outflow using bench testing. The Mesh system presented the highest mean value of outflow and the lowest range of variation.

Determination of calcium and magnesium in hydroethanolic extracts of propolis by atomic absorption flame spectrophotometry

Propolis is a natural product collected by honeybees and has a large range of pharmacological activity, including antimicrobial, antitumoral, antioxidant and anti-inflammatory. Its use as a popular medicine is increasing all over the world, creating a need for quality control of the commercial products. In this study the levels of calcium and magnesium in commercial hydroalcoholic propolis extracts from varies states of Brazil were determined by atomic absorption flame spectrophotometry and different values were obtained for northern and southern states. This study can be extended to the analysis of metals that are harmful to health. The results showed that the calibration curves were linear over a wide concentration range (0.5-4.0 μg.mL -1 for calcium and 0.05-0.4 μg.mL -1 for magnesium) with good correlation coefficients (0.999 and 0.988, respectively). Good analytical recovery (94%) was obtained. The proposed method showed adequate precision and relative standard deviation lower than 2 %. The method is accurate and precise as well as having advantages such as simplicity and speed.

Evolução da margem atlântica equatorial do Brasil: Três fases distensivas

The extension of the Pangaea started in the Upper Triassic and evolved to uplifts, magmatism and development a triple junction during the Mesozoic, and opening the Central Atlantic Ocean. The Brazilian Equatorial Atlantic margin was formed in three Mesozoic extensional events. The first event is recorded by the Calçoene Graben of the Foz do Amazonas Basin. The second event started in the Valangian and is recognized by the enlargement of the Foz do Amazonas Basin, formation of the Marajó and Grajaú basins, and the Gurupi Graben System. The third event commenced in the Albian related to northwestward progression of the rift system, which enlarged the Foz do Amazonas and formed the Potiguar, Ceará, Barreirinhas and Pará-Maranhão basins. At the end of the Lower Cretaceous the movements attenuated in the Marajó Basin and Gurupi Graben System; the extension concentrated in the Foz do Amazonas, Pará-Maranhão and Barreirinhas basins, and evolved to continental rupture of northern South America and western Africa opening of the Equatorial Atlantic Ocean.

Produção de agaricus blazei ss. Heinemann (A. brasiliensis) em função de diferentes camadas de cobertura e substratos de cultivo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biaxial flexural strength of CAD/CAM ceramics.

Aim of the study was to evaluate the biaxial flexural strength of ceramics processed using the Cerec inLab system. The hypothesis was that the flexural strength would be influenced by the type of ceramic. Ten samples (ISO 6872) of each ceramic (N.=50/n.=10) were made using Cerec inLab (software Cerec 3D) (Ø:15 mm, thickness: 1.2 mm). Three silica-based ceramics (Vita Mark II [VM], ProCad [PC] and e-max CAD ECAD]) and two yttria-stabilized tetragonal-zirconia-polycrystalline ceramics (Y-TZP) (e-max ZirCad [ZrCAD] and Vita In-Ceram 2000 YZ Cubes [VYZ]) were tested. The samples were finished with wet silicone carbide papers up to 1200-grit and polished in a polishing machine with diamond paste (3 μm). The samples were then submitted to biaxial flexural strength testing in a universal testing machine (EMIC), 1 mm/min. The data (MPa) were analyzed using the Kruskal-Wallis and Dunn (5%) tests. Scanning electronic microscopy (SEM) was performed on a representative sample from each group. The values (median, mean±sd) obtained for the experimental groups were: VM (101.7, 102.1±13.65 MPa), PC (165.2, 160±34.7 MPa), ECAD (437.2, 416.1±50.1 MPa), ZrCAD (804.2, 800.8±64.47 MPa) and VYZ (792.7, 807±100.7 MPa). The type of ceramic influenced the flexural strength values (P=0.0001). The ceramics ECADa, e-max ZrCADa and VYZa presented similar flexural strength values which were significantly higher than the other groups (PCb and VM IIb), which were similar statistically between them (Dunn's test). The hypothesis was accepted. The polycrystalline ceramics (Y-TZP) should be material chosen for make FPDs because of their higher flexural strength values.

Alterations in levels of NPK, electrical conductivity and pH of substrate, in cultivation of peppers

The objective of this work was to evaluate the chemical alterations of the substrate in the cultivation of pepper in coconut husk fiber, in a protected environment. Initially, 160 pepper plants ('Eppo') were divided into four blocks, where two pots per block were analyzed every 21 days after transplanting. The cultivation of pepper was carried out in plastic pots of 13 L, containing coconut husk fiber, and placed in double rows with a spacing of 0.5×0.8 m between single rows and 1.10 m between double rows. After removal of the plants from the pots, individual samples of substrate (approximately 1 L) were collected from each pot and dried at ambient temperature. Electrical conductivity (EC), pH, and levels of NH4 +-N, NO3 -, P and K were determined for all periods of the cultivation. These analyses were performed using the method of extraction 1:1.5 v/v. For the conditions which the experiment was conducted, there was an increase in substrate EC, as well as in the levels of nitrogen, phosphorus and potassium.