Análise da paisagem cultural do Sítio Arqueológico Turvo V-B

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da reversão do fundo de latas de alumínio para bebidas - Buckle

This work approaches the main methods of plastic deformation of metals, with a focus on the deep drawing process. The mechanical properties were evaluated with the tension tests. It is presented the aluminum alloys designation, followed by applying heat treatments and the designation of tempers. The manufacture of aluminum beverage cans is described step by step, in general terms. The main objective is to analyze how different cans background geometries have great influence on the dome reversal. To be able to achieve the goal it was necessary to use cans of different manufacturers, which were used in buckle tests to obtain the reversal pressures, tensile tests and geometric analysis. Finally empirical equations were obtained correlating these variables, and it was observed that the conformation of reforming change significantly it's behavior

Análise da técnica dos estilos Crawl e Costas em praticantes de natação

The aim of this study was to analyze and evaluate the performance of swimmers tied to the Extension Project Natação na UNESP at distances of 25m, 50m, 75m and 100m. The study included 20 people, including 12 men and 8 women. From an aerial footage was possible to record the tests proposed by the analysis of videos of, Freestyleand Backstroke styles for stroke cycles, average speed, stroke frequency and time proof stretches of 0-25m, 25-50m, 50-75m e 75-100m. Thus, it was possible to calculate stroke length, frequency, average speed as proposed in the study of Maglischo (1999). From these data were applied to descriptive statistics with mean and standard deviation, minimum and maximum scores in the different parameters of analysis and statistical tests, t-test and correlation to make comparisons between styles and between the distances swims by the subjects. Regarding the performance of the participants in the eight proposed tests, it can be said that most have already mastered the styles Crawl and Back Crawl for having managed to finish the tests proposed. However, the results of the variables analyzed mainly by the total time obtained in the tests can classify the subjects in the initial phase of learning and to start the training will be necessary to improve the implementation of styles

Analise das emissões de CO2 e de energia - simulação com novas tecnologias siderúrgicas

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)

Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level

Análise de indicadores econômicos e financeiros: estudo em empresa do setor sucroenergético no interior do estado de São Paulo

Não disponível

Análise de problemas em comum encontrados entre as unidades de prédios residenciais em grandes empreendimentos

As the market expands, especially about construction, further treatments were required on the development of a building. This fact is noted due to the need to satisfy the client each time more, which requires more quality in the product final delivery. Therefore, the competition between companies grows every day to the effective and efficient production of their final products. This work shows negative factors that have influence in the product final delivery and consequently presents methods to improove the quality of this product. This study is characterized in management methods that are wrongly applied to the study of case of this work, which took place in the city of Guarulhos and was carried out during a work conducted by a large construction company

Análise do comportamento de compra de medicamentos isentos de prescrição e da automedicação

Os Medicamentos Isentos de Prescrição (MIPs) são de venda livre que têm como propósito tratar sintomas e distúrbios menores, sendo responsáveis pela movimentação de bilhões de dólares a cada ano mundialmente. É permitida a veiculação de propagandas direta ao consumidor, não sendo obrigatória a apresentação da prescrição. A disponibilidade e o consumo de MIPs podem impactar a saúde, economia e a promoção do uso racional de medicamentos, portanto se faz necessário compreender o comportamento e as motivações dos consumidores pelos MIPs e a prática da automedicação. Para tanto, conduziu-se um estudo entre março e junho de 2014 por meio de entrevistas com perguntas abertas referentes a classes terapêuticas adquiridas para automedicação, frequência com que os consumidores compraram MIPs e se automedicaram, os problemas de saúde que os motivaram a se automedicarem e a comprarem MIPs e à prática da automedicação. Foram entrevistados 47 consumidores entre 18 e 70 anos residentes em Araraquara/SP. A indicação familiar é o fator de influência mais recorrente (14), seguida pela indicação do balconista da drogaria (11) e amigos (6). A classe de MIPs mais consumida pelos entrevistados é a de analgésicos, que está relacionada com a ocorrência de dores de cabeça e musculares, sendo que a compra de MIPs ocorre, no mínimo, uma vez por mês. As motivações para a compra são principalmente o preço (33) seguido da marca (30). A automedicação ocorre também para o alívio de dores e a maioria alegou saber o conceito da automedicação porém, ainda assim, afirmou administrar por conta própria medicamentos MIPs e/ou sujeitos a prescrições, sem orientação de um profissional de saúde.

Análise do gene TUBB3 e de Copy Number Variations em pacientes com Polimicrogiria

A polimicrogiria (PMG) é uma malformação do córtex cerebral causada por falhas no seu desenvolvimento, caracterizando-se por um número excessivo de pequenos giros e laminação anormal, dando à superfície cortical uma aparência irregular e grosseira. A gravidade de suas manifestações clínicas se relaciona diretamente com a extensão da malformação e das regiões cerebrais afetadas, sendo que a presença de lesões bilaterais ou unilaterais extensas indica um pior prognóstico. Uma das síndromes de polimicrogiria mais freqüentes e, conseqüentemente, mais bem descritas clinicamente, é a polimicrogiria perisylviana bilateral (PPB). Essa forma de PMG atinge a região que tange a fenda Sylviana, podendo apresentar-se tanto unilateralmente quanto em ambos os hemisférios. Vários genes têm sido relacionados a diferentes formas de polimicrogiria, são eles AFF2,TUBA1A, TUBB2B e TUBA8, SRPX2 e WDR62. Estes genes já foram estudados pelo nosso grupo de pesquisa em um grupo de pacientes compostos de casos familiares e esporádicos, acometidos em sua maioria pela forma perisylviana de PMG. Nenhuma variante deletéria foi identificada nestes genes. Recentemente um novo gene foi implicado na etiologia molecular das PMG, o TUBB3. O gene em questão pertence à mesma família de TUBA1A, TUBB2B e TUBA8 e codifica uma proteína de ligação aos microtúbulos, tendo importante papel na formação do fuso. Além deste gene, também tem sido descritas alterações genômicas, denominadas de Copy Number Variations (CNV), estas variações estruturais tem sido associadas com diversos distúrbios neurológicos, que vão desde transtornos psiquiátricos até malformações do córtex cerebral como a PMG. Desta forma, o objetivo deste trabalho foi analisar a existência de alterações de ponto deletérias no gene TUBB3 em pacientes com PMG e também, o envolvimento de CNVsna etiologia deste tipo de malformação ...

Análise estática de um guindaste de torre, utilizando o método dos elementos finitos

The finite element method is of great importance for the development and analysis of a new product being designed or already on the market, and that requires some specific request or special application. The tower crane, being an essential equipment for modern construction to increase productivity and safety on construction sites, is required for many types of special applications day after day, in many kinds of work. Paying attention to this growing need for handling special projects for the tower crane, faced with the importance and necessity of development and improvement of knowledge in more accurate and practical calculation methods such as the finite element method , for greater agility and precision in the response to a new project. The tower crane is defined by the maximum load moment that it can act with a certain amount of load. The tower crane which will be analyzed in this work , for example, is a tower crane with a resulting capacity of 85 Metric Tons which are considered basic dimensions data of a fisical tower crane of a crane company Liebherr in Guaratinguetá . Thus, the project analysis will begin with the threedimensional representation of the crane lines with AutoCAD software , conversion of this model to the format accepted ANSYS Workbench and completion of 3D modeling of structural components in Design module ANSYS software. After structural modeling is completed, the simulation is performed in static simulation of ANSYS Workbench software mode. The standards will be adopted to DIN (Deutsches Institut für Normung) and EN 14439 (Europäische Normung 14439) and some NR 's related to specific security class of tower cranes, which will be referred throughout the work

Análise estrutural do suporte de pastilha de grafite para lubrificação de roda ferroviária

This study aims to structurally evaluate a support of graphite pastille for the lubrication of railway wheels. The proper lubrication of wheel flanges of the railway extends the life of this component, so it is very important that this occurs lubrication to reduce the costs involved in railway maintenance. To prepar the evaluation structural will be used to International Electrotechnical Comission standard (IEC 61373) establishing which load cases should be applied to this component. The applied loads on the support (accordance with IEC) are random accelerations and accelerations due to shocks, thus simulating the conditions that exist along the route of the train. The structural analyzes are performed by the finite element method, with the aid of the Cosmos software. Thus, it is possible to determine the stresses acting on the support, and so the allowable stresses compared with the standard proposed by the AISC. The stress in the structural analyzes are lower than allowable therefore considered for the configuration presented, unexpected structural problems

Análise global da diversidade de microorganismo importantes para a fermentação nas usinas de álcool: uma abordagem utilizando metagenômica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antidepressivo modula o comportamento e a expressão gênica das cadeias de miosina, serca2 e fosfolambam em ratos com insuficiência aórtica?

Introduction: Aortic insufficiency (AoI), a volume overload, is characterized by the diastolic reflux of blood from the regurgitating aorta to the left ventricle. This effect results from malfunctioning aortic cusps. The main cause of AoI in developing countries is rheumatic fever, including Brazil, and valvar degeneration in developed countries. There is a strong association between cardiovascular diseases and depression. Selective serotonin reuptake inhibitors (SSRI) are one of the most prescribed antidepressants in the world. Previous studies of our laboratory showed that the utilization of a SSRI, paroxetine, improved cardiac function in rats with sub-chronic AoI and reduced the daily ingestion of hypertonic sodium (NaCl 0,3M). Cardiovascular diseases can determine behavior changes like increase of anxiety, and it is yet unknown if AoI would determine anxiety or anhedonia, incapacity of obtaining pleasure through physical or sensorial experiences. A possible target for SSRI action could be a change in the expression of enzyme isoforms that collaborate in the contractile function of the heart muscle, like the heavy chains of myosine, the sarcoplasmatic reticulum Ca2+/ATPase (SERCA) and its regulator protein, phospholamban (PLB). Objectives: Evaluation of behavior parameters for anxiety and anhedonia state and genic expression of a-myosine, b-myosine, SERCA2a and PLB in the heart tissue of rats with subchronic AoI that received treatment with an SSRI (paroxetine) for 4 weeks. Methods: Surgery to induce AoI was performed on male Wistar rats, anxiety was evaluated by the elevated plus-maze (EPM) and state of anhedonia was tested by ingestion of 2% sucrose solution. After euthanasia the heart tissue was collected and total RNA was extracted to be analyzed by the RT-qPCR method. Results: Heart fractional shortening was preserved in rats with AoI that were treated compared to rats with AoI that were not treated. There was no statistically ...

Aplicação da moderna teoria do Portfólio em ativos não financeiros

The Markowitz's objective functions, Value-at-Risk and Conditional Value-at-Risk, are largely used tools in the financial Market for portfolio optimization. This paper tries to analyze these functions having as a target to adapt them for application in non-financial assets portfolios. The paper uses as an example the Electricity Market to analyze and optimize a fictitious investment portfolio of a possible electric power utility. Showing that, besides being possible, which considerations must be taken and which analysis must be made to apply the Modern Portfolio Theory in the non-financial universe

Aplicação de melhorias na organização e nos processos de usinagem pesada

Currently productivity is a concern in large firms and in heavy machining industries could not be otherwise . The issue of time in the process becomes a relevant and worthy of analysis point , especially that the setup time becomes a critical issue to be addressed . Due to the size of the equipment studied ( heavy machining ) and especially with regard to the characteristics of the machine tool and the parts to be machined , generally robust and large parts , the preparation of such parts shall be made accurately to the machining has a good result as planned . With the setup acting as a limiter of productivity growth in this sector , actions constantly in search of reducing downtimes and optimization are taken . This study aimed to conduct a study that confirms increased productivity by reducing the machining time , especially setup time and also with the implementation of organizational tools. Actions taken in heavy machining industry Arm L- 580 Liebherr company in Brazil specifically in CNC Boring PAMA Speedram 3000 were analyzed . Through a qualitative study using the method of case study , it was examined before and after the sector and reducing setup times . Evidencing the shares through figures and collection times . The end result of this analysis was to verify that through simple actions productivity and organization in the area were directly affected in a positive way , and supporting organizational change throughout training were taught to be incorporated into the company culture