Atmospheric emission of reactive nitrogen during biofuel ethanol production

This paper evaluates emissions to the atmosphere of biologically available nitrogen compounds in a region characterized by intensive sugar cane biofuel ethanol production. Large emissions of NH(3) and NO,, as well as particulate nitrate and ammonium, occur at the harvest when the crop is burned, with the amount of nitrogen released equivalent to similar to 35% of annual fertilizer-N application. Nitrogen oxides concentrations show a positive association with fire frequency, indicating that biomass burning is a major emission source, with mean concentrations of NO, doubling in the dry season relative to the wet season. During the dry season biomass burning is a source of NH3, with other sources (wastes, soil, biogenic) predominant during the wet season. Estimated NO(2)-N, NH(3)-N, NO(3)(-)-N and NH(4)(+)-N emission fluxes from sugar cane burning in a planted area,of ca. 2.2 x 10(6) ha are 11.0, 1.1, 0.2, and 1.2 Gg N yr(-1), respectively.

Effects of hand weeding strip and nitrogen fertilizer on corn plants

The objective of the present research was to evaluate effects of different strip weed control associated with nitrogen fertilizer on corn applied after planting. The experiment was set and conducted in Botucatu, São Paulo State, Brazil, and the hybrid planted was Dekalb 333-B. A completely randomized block design with four replications was used. Experimental plots were disposed as a factorial scheme 2 x 2 x 4, constituted by two types of weeding on row (with or without manual hoeing), two types of weeding on inter-row (with or without manual hoeing), and four nitrogen levels applied after planting (00, 60, 90, and 120 kg ha-1). Plots were composed by six rows with 5 m length. Nitrogen fertilizer was applied at 35 days after emergence (d.a.e). For weed community it was evaluated: weed density, dominancy, frequency, and relative importance. The main weed species were: Brachiaria plantiginea, Amaranthus retroflexus, Bidens pilosa, Cyperus rotunds, Brachiaria decumbens, Euphorbia heterofila, Oxalis latifolia, Acanthospermum hispidum, Commelina benghalensis. It was evaluated corn height at 40 and 100 d.a.e., first ear insertion height at 100 d.a.e., and final grain yield at harvesting. Plants and first ear insertion height were affected when nitrogen fertilizer was not applied. Treatments without weed control showed that weed interfered negatively with plants height. There were no correlation between weeds and nitrogen fertilizer for all parameters evaluated. Parcels without weed showed the highest ear weights and final grain production. Treatments that received nitrogen fertilizer, independently of studied arrangement, provided higher yields.

An alternative procedure to decrease the dimension of the frequency dependent modal transformation matrices: Application in three-phase transmission lines with a vertical symmetry plane

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into Quasi-modes α, β and zero. After that, Quasi-modes α and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km. © 2006 IEEE.

Modeling of a MIT for the application of a frequency inverter of the electric vehicle

Nowadays, drives that use a combination of induction motors and frequency inverters are very common, a fact due to the financial practicality and viability in purchasing and operating that system. This system modeling and simulation becomes important when it wants to evaluate the performance, to calculate and correct parameters, and it has a fundamental role in functionality and viability analysis for application of new configurations and technologies. This work is about to elaborate a simple induction motor model based in the torque versus speed characteristic, using the linearization method for application in a specific operation range to be controlled by a frequency inverter. © 2011 Springer-Verlag Berlin Heidelberg.

RESPONSE OF CORN GROWN IN TILLAGE SYSTEM FOR THE APPLICATION OF NITROGEN DOSES IN A SEQUENCE OF PLANT COVER

The use of cover crops can produce large amounts of biomass, improving the cycling of nutrients, particularly nitrogen, promoting productivity gains and cost savings. Given this, the objective was to evaluate the use of N rates associated to cover crops grown in pre-harvest nutritional status, nitrogen accumulation and corn yield in both years. The experiment was conducted in an Oxisol with maize, no-tillage system. The experimental design was a randomized block, split plot with four replications. The main treatments were: six cropping systems (sun hemp, jack bean, lablab, millet, and velvet bean fallow) in secondary treatments: four doses of nitrogen (0, 60, 120 and 180 kg ha(-1) N). Corn yield was not affected by the type of coverage for pre-season, regardless of the nitrogen applied in the soil. Still, the use of nitrogen fertilizer in the soil promotes gains in grain yield in the first year of cultivation, regardless of the type of coverage in pre-season. In the first year (2006/2007) the species of coverage produced more biomass were velvet bean, jack bean, sun hemp and lablab, while in the second year (2007/08) were the sun hemp, millet, lablab, jack bean and velvet bean, respectively.

Maize leaf phytotoxicity and grain yield are affected by nitrogen source and application method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of nitrogen and application ways of a plant biostimulant on different wheat genotypes contrasting in stature

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sewage sludge as nitrogen and phosphorus source for cane-plant and first ratoon crops

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical attributes of a degraded soil after application of water treatment sludges

Mining is an activity that tends to degrade the environment. The restoration of mining areas, aims to accelerate and improve the succession process according to its future use. The objective of this work was to rehabilitate a soil degraded by tin mining activities in the Amazon Basin (Jamari National Forest, State of Rondonia) with the application of water treatment sludge (WTS), and verify the effect of Sludge on Values of pH (CaCl2 0.01 mol L-1), organic matter, P, Ca, Mg, K, H+Al, and soil micronutrient contents when Cultivated with native plants, legumes, and grass species. A factorial (3 x 5) experimental design was used to optimize the rehabilitation of these areas including three N rates (100, 200, and 300 mg N ka(-1) soil supplied by WTS), five plant species (grasses, legumes, and native plants), and two controls (degraded soil with no fertilizer and degraded soil fertilized with mineral fertilizers), with four replications. WTS increased pH values. The chemical products used to treat the water contributed, in greater extension, to increase soil Ca and Fe contents. The use of WTS as fertilizer proved viable, since it contains nutrients for plants; however, nitrogen Should not be used as a criterion to define the rate of Sludge application, because it is present at small amounts in the WTS.

CABBAGE GROWTH and PRODUCTION IN RELATION TO PLANT DENSITY and NITROGEN

At present, the Brazilian market prefers cabbage (Brassica oleracea var. capitata) of smaller size, which can be achieved by increasing population density; yet this management can alter the optimum rate of nitrogen (N), its second most required nutrient. This study was conducted in the Universidade Estadual Paulista, Jaboticabal, São Paulo, Brazil, from February to June 2004. The objective was to evaluate the effect of population density: 31 250 (DI) and 46 875 plants ha(-1) (D2) with 0, 100, 200 and 300 kg N ha-1 on the growth and production of cabbage Astrus. The experimental design consisted of randomized blocks with a 2 x 4 factorial arrangement and three replicates. Statistical analysis were a variance analysis (F test), the Tukey test for population density averages and polynomial regression for the N rates. In D1, an increase was recorded in the number of inner and outer leaves, dry matter of inner and outer leaves, the stem diameter at the insertion of the head, and the stem dry and fresh matter. The maximum size of the plant in D2 was 1.57 kg and was obtained with 300 kg N ha(-1), while in D1 it was 2.1 kg and was obtained with 244 kg N ha(-1). The optimal economic rate in 131 was 227.1 kg N ha(-1). The highest yield (72.7 t ha(-1)) was obtained with the highest N rate in D2. Smaller cabbage heads, commercially preferred, were obtained without the application of N, regardless of plant population.

Root system of Panicum maximum Jacq. cv. IPR-86 Mil(e)over-capnio fertilized with nitrogen and submitted to rotational stocking

The effect of nitrogen on the root system of the species Panicum maximum Jacq. cv. IPR-86 Mil (e) over cap nio, under grazing, was evaluated. The N rates were 0; 150; 300 and 450 kg/ha. year. The root density was evaluated during pregrazing at five years of successive N application, in three depths (0-10; 10-20 and 20-40 cm) and the root growth at 7, 14, 21, and 35 days after grazing. The grazing method adopted was rotational stocking. Root length and root mass densities in pre-and post-grazing presented maximum values at rates 204, 206, 192, and 197 kg/ha of N, respectively. The root growth (in root length density) increased, on average, until 29 days after grazing at rates 0, 150, and 300 kg/ha; at 450 kg/ha N rate, the increase was linear. Independently of N rates, around 60 and 25% of IPR-86 Mil (e) over cap nio cultivar root system was concentrated in 0-10 and 10-20 cm depth, respectively.

Optimization of fibrolytic enzyme production by Aspergillus japonicus C03 with potential application in ruminant feed and their effects on tropical forages hydrolysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nitrogen fertilization of fall panicum cultivars (Panicum dichotomiflorum Michx.): biochemical and agronomical aspects

São escassas as informações sobre cultivares melhoradas e técnicas culturais adequadas à cultura do painço. Este experimento objetivou avaliar o efeito da aplicação de níveis de nitrogênio (N) em cobertura no desenvolvimento e nos atributos bioquímicos de duas cultivares de painço. Para tanto, instalou-se um experimento em Botucatu (SP), em caixas de cimento amianto, mantidas em túnel plástico. O delineamento experimental foi em blocos casualizados, em esquema fatorial 2x6, com dois cultivares de painço (AL Mogi e AL Tibagi) e seis níveis de adubação nitrogenada (0, 40, 80, 120, 160 e 200 mg L-1), aplicada em cobertura, no início do perfilhamento. Os dois cultivares utilizados tiveram comportamento semelhante em relação às variáveis avaliadas, em resposta à aplicação de N em cobertura. A aplicação de doses de N na cultura do painço proporcionou incrementos nos teores relativos de clorofila, aminoácidos totais, nitrogênio total e altura das plantas, e redução dos teores de açúcares na matéria seca, até o intervalo entre 120 e 160 mg de N L-1. O perfilhamento e produção de grãos tiveram aumento linear com a aplicação de N. A adubação nitrogenada não afetou a produção de matéria seca.

Nitrogen washing from C3 and C4 cover grasses residues by rain

Crop species with the C-4 photosynthetic pathway are more efficient in assimilating N than C-3 plants, which results in different N amounts prone to be washed from its straw by rain water. Such differences may affect N recycling in agricultural systems where these species are grown as cover crops. In this experiment, phytomass production and N leaching from the straw of grasses with different photosynthetic pathways were studied in response to N application. Pearl millet (Pennisetum glaucum) and congo grass (Brachiaria ruziziensis) with the C-4 photosynthetic pathway, and black oat (Arena Strigosa) and triticale (X Triticosecale), with the C-3 photosynthetic pathway, were grown for 47 days. After determining dry matter yields and N and C contents, a 30 mm rainfall was simulated over 8 t ha(-1) of dry matter of each plant residue and the leached amounts of ammonium and nitrate were determined. C-4 grasses responded to higher fertilizer rates, whereas N contents in plant tissue were lower. The amount of N leached from C-4 grass residues was lower, probably because the C/N ratio is higher and N is more tightly bound to organic compounds. When planning a crop rotation system it is important to take into account the difference in N release of different plant residues which may affect N nutrition of the subsequent crop.

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)