Efeitos de dietas com polpa cítrica em substituição ao milho em grãos no concentrado sobre a degradabilidade e a fauna ruminal em bubalinos

Quatro búfalos com cânulas ruminais foram distribuídos aleatoriamente em quadrado latino 4 x 4, compreendendo quatro rações com feno de capim-coastcross (Cynodon dactylon) (50% MS) e níveis crescentes de polpa cítrica peletizada em substituição ao milho em grão moído no concentrado (0, 33, 66 e 100% MS). Foram avaliadas a degradabilidade dos nutrientes e a população de protozoários no rúmen. Houve efeito quadrático da fração solúvel dos nutrientes entre os tratamentos, com valores maiores nos dois extremos. A taxa de degradação da PB do feno e da MS da polpa cítrica apresentou-se linear com aumento da polpa cítrica na ração. As rações contendo polpa cítrica promoveram menores concentrações de Entodinium e número total de ciliados/mL que a dieta só com milho. Houve predominância dos Entodinium nas dietas contendo somente milho ou somente polpa cítrica, enquanto em mistura predominaram os ciliados da subfamília Diplodiniinae. Observou-se efeito de interação da polpa cítrica com o milho, promovendo modificações no metabolismo ruminal, especialmente na solubilidade dos nutrientes, na curva do pH e na composição da fauna.

Épocas de semeadura da soja I. Efeitos na produção de grãos e nos componentes da produção

O presente trabalho foi realizado como objetivo de estudar os efeitos de épocas da semeadura na produção de grãos e nos componentes de produção de três cultivares de soja (Glycine max (L.) Merrill) de ciclos culturais distintos. Os experimentos foram desenvolvidos em campo, no município de Botucatu, Estado de São Paulo (latitude 22º 51 'S e longitude 48º 27'W.Grw.), em solo classificado como Terra Roxa Estruturada, durante os anos agrícolas de 1977/78, 1978/79 e 1979/80. As cultivares empregadas foram Paraná, Santa Rosa, UFV-1. As semeaduras, em número de seis, foram realizadas com intervalos, aproximadamente, quinzenais, com início de semeadura em outubro. Foram avaliados: a produção de sementes (kg/ha), número de vagens/planta, percentagem de vagens normais e peso de 100 sementes. As maiores produções de grãos, para as três cultivares, foram obtidas nas semeaduras realizadas na segunda quinzena de outubro e durante o mês de novembro. O número de vagens por planta e o peso de 100 grãos foram os componentes da produção que mais sofreram efeitos das épocas de semeadura.

Presença de microrganismos na silagem de grãos úmidos de milho ensilado com diferentes proporções de sabugo

This experiment was carried out in the Microbiology Laboratory of UNESP-Jaboticabal, to evaluate the different species of microorganisms in high-moisture corn grain silage. The treatments were five percentages of corn cob in the silage (0, 5, 10, 15 and 20% DM) and four sampling periods after the opening of the silos (0, 2, 4 and 6 days), using a factorial arrangement in randomized block design with three replications. The growth of Lactobacillus was higher (P<0.01) in the silage prepared only with grains in relation to the other treatments. The presence of Clostridium differed (P<0.01) among the treatments, with values ranging from 1.30 and 3.32 log CFU/g of silage. It was concluded that the population of Lactobacillus was satisfactory to obtain a good fermentation of the silages, and the presence of corn cob facilitated the development of Clostridium and also of yeast and Enterobacteriaceae after the silos were opened.

Avaliação da silagem de grãos úmidos de milho

This work had the objective of evaluating the effects of different percentages of corn (Zea mays L.) cob on the quality of the silage of high-moisture corn grains. The following treatments were studied: percentages of corn cob in the silage (0, 5, 10, 15 and 20%); period of sampling after opening the silos (zero, two, four and six days). The factorial arrangement 5 × 4 was studied according to a completely randomized block design with three replications. The variables studied were not affected by the sampling period. The buffering capacity and the pH were not affected by the cob, while the percent soluble carbohydrates and amoniacal nitrogen increasing until 1.2 and 1.89 unit percent, respectively. Increasing the amount of corn cobs reduced the contents of DM (from 63.9% to 58.6%), CP (from 10.0% to 7.3%), EE (from 4.87% to 3.92%) and the values of DMIVD (from 90.5% to 79.1%) in the silages and increasing the contents of acid detergente fiber (ADF) (from 3.3% to 12.9%) and neutral detergente fiber (NDF) (from 15.16% to 26.1%). The values of brute energy (BE) were not affected (P>0.01) by the cob corn in the silage.

Estudo comparativo do desempenho de rebolos com grãos superabrasivos e convencionais

Grinding is a precision machining process which is widely used in the manufacture of components requiring fine tolerances and smooth surfaces. There are several imput parameters (cutting conditions, cutting fluid and grinding wheel type used, dressing conditions etc.) which can affect the process variables (tangential and normal cutting forces, roughness, grinding temperatures, G ratio, etc.) leading to differences in the roughness, in the surface integrity and in the mechanical strength of the ground component. Consequently, the imput parameters must be controlled in order to insure the workpiece final quality. This paper presents a comparative evaluation of the performance of two types of grinding wheels [a conventional (Al2O3) and a superabrasive (CBN)] when grinding a VC131 steel, by the analysis of specific process variables when varying the cutting conditions. Highest values of G ratio and lowest workpiece roughness was observed when using CBN grinding wheels. This confirms the global trend of replacement of alumina grinding wheels by CBN, when grinding DTG (difficult to grind) materials.

Teores de nutrientes na folha e nos grãos de aveia-preta em função da adubação com fósforo e potássio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Grãos ultrafinos por laminação a morno e recozimento intercrítico

Grain refinement of low carbon steel via the warm deformation of martensite during torsion testing was investigated. At the beginning of straining, laths with high dislocation density were observed. After large deformations, a ferrite matrix with grain size close to 1μm and dispersed cementite particles were attained.

Características de carcaça de cordeiros alimentados com grãos e subprodutos da canola

The aim of this work was to evaluate the introduction of 8% grains and by-products (meal or cake) of canola in the diets of lambs. To evaluate quantitative carcass characteristics, 24 Santa Ines lambs were used in a completely randomized design. Diets with averages of 15.4% of CP in DM and 80.2% of TDN were composed for 40% Tifton hay and 60% concentrate based on corn grain, soybean meal, whole grain canola, canola meal, canola cake and mineral mixture. The use of whole grains and by-products of canola in the diet of lambs finished in feedlot did not influence (p > 0.05) quantitative carcass characteristics. For cut dressing in relation to the CCW, no effect was observed for the analyzed variables among treatments. It was concluded that the introduction of grains and by-products of canola allow for satisfactory results, and could be recommended in the formulations of lamb diets.

Determinação do teor de extrato etéreo de grãos de oleaginosas através de diferentes processamentos

The objective of this work was to determine the ether extract content of peanut and canola seeds, with extraction in Soxhlet apparatus and with three types of processing: grinding in ball mill type; maceration in mortar and grind into micro mill after maceration in mortar. Data were analyzed in an entirely randomized design with 3 treatments and 12 replicates, submitted to variance analysis and the means were compared using Tukey test (P<0.05) with routines of the SAS statistical package. The largest percentage of ether extract was obtained in the treatment which the peanuts were subjected to a greater number of extractions (56.43%), and all treatments presented different results(P <0.05). In canola grains, it was observed that the extraction with the method of grinding in ball mill and the method of sequential extraction (macerate + ground in micro mill) were statistically similar (43.52 and 42.35% respectively), and these methods were more efficient (P <0.05) to extract the ether extract than the treatment in which the grains were only macerated. For peanut grains it was concluded that the most efficient method was the sequential one and to the canola grain, it can be used only a grinding mill as samples processing witch will be submitted to ether extract extraction.

Degradabilidade ruminal da matéria seca de grãos de milho e de sorgo com alto ou baixo conteúdo de tanino processados

This work evaluated the effects of high moisture silage, extrusion and corn and sorghum drying with and without tannin, on the chemical composition and ruminal digestion of dry matter. The experimental design was completely randomized in 3x3 factorial scheme (kinds of grains: processing), for the chemical composition and degradability and three blocks (animals) through in situ method. It was verified significant difference between kinds of grains and processing in relation to the chemical composition, except for crude protein and mineral matter. The contents of etherextract in the three types of grains, were reduced significantly with the high moisture silage, extrusion and drying in relation to the humid material. For the contents of phenols, total and condensed tannin there was effect of hybrid, processing and interaction, and the most elevated contents were found in sorghum with tannin. Although grain composition has been similar, the interaction in ruminal ambient associated to the tannin, promoted differences in the dry matter degradability. It was concluded that sorghum without tannin may be ensiled or extruded, while the sorghum with tannin, must be extruded to improve the degradability and availability of nutrients.

Doses de zinco e nitrogênio na produtividade e qualidade de grãos de ervilha

Peas present a potential to be cultivated in the winter, in Brazil, and also a great importance, especially in human feeding, due to its high protein content. However, its yield is still low and there are just a few studies aiming at improving pea grains quality and yield. This study aimed at evaluating the nitrogen and zinc fertilization effect on the pea grains (Utrillo cultivar) chemical quality and yield. The experiment was carried out in a dystrophic clayey Latosol-Haplustox, in Selvíria, Mato Grosso do Sul State, Brazil, in 2005. A randomized blocks design was used, in a 4×4 factorial scheme, totaling 16 treatments and 3 replications, including four nitrogen doses (0 kg ha-1, 60 kg ha-1, 120 kg ha-1, and 240 kg ha-1), as urea, via ground, at 30 days after sowing (DAS), and four zinc doses (0 kg ha-1, 1,5 kg ha-1, 3 kg ha-1, and 6 kg ha-1), as zinc sulphate, via leaf, at 45 DAS. The combination of zinc and nitrogen doses improved the grains chemical quality. Zinc had no effect on grain yield, however, high nitrogen doses negatively affected yield.

Substituição dos grãos secos de milho pela silagem de grãos úmidos de milho para vacas da raça holandesa em lactação

In order to evaluate the effects of replacement of dried corn (GSM) for silage moisture corn (HMCS) on production and milk composition were used five Holstein cows, primiparous with a mean of 112 days post delivery, confined in Tie Stall, for 70 days. We used five diets according to NRC to 17.5% CP (DM) and 2.4 Mcal / kg DM, the 40:60 ratio of roughage and concentrate containing soybean meal, sugar cane silage and hay and substitution levels of the GSM HMCS the following treatments: a) 0%, 2) 25%, 3) 50%, 4) 75% and 5) 100%. Milk production and dry matter intake (DMI) were recorded daily. The animals were milked daily 6:00 and 18:00 h, and milk samples collected from consecutive milkings of each experimental period of 14 days (four days of collection). The experimental design was a 5x5 Latin square and the data analyzed by the statistical program SAS. Body weight (508 kg), milk (23.6 kg), corrected milk (22.7 kg), DMI (17.13 kg) showed no significant difference, but the intakes of neutral detergent fiber (6.67 kg), and detergent acid (3.39 kg), feed efficiency for the production of milk (milk 1.41 kg / day) urea nitrogen (17.67 mg / dL) differ, thus indicating that HMCS is more efficient than GSM in the diet of dairy cows not alter the production and milk composition.

Inclusão de grãos de girassol na ração de cordeiros sobre as características quantitativas da carcaça e qualitativas da carne

This study aimed to evaluate the carcass quantitative characteristics, tissue composition of carcass cuts and meat quality of lambs receiving sunflower seeds in the diet. Twenty-one lambs 7/8 Ile de France 1/8 Ideal, not castrated, with initial body weight of 17 kg were housed in individual pens and distributed in three diets (0,7.5 and 15% of sunflower seeds inclusion) in a completely randomized design in 3 x 2 factorial arrangement (three diets and two carcass cuts). At the end of the experimental period, the animals were slaughtered; weights and hot and cold carcass yields and commercial and biological carcass dressing were collected. The carcasses were split lengthways and left half carcass divided into six anatomical parts. The leg and loin were removed for evaluation of tissue composition, meat color, water holding capacity, cooking losses and shearing force. Difference was detected in the commercial carcass yield; with higher value (46.82% of total weight) for carcasses of lambs fed without sunflower seeds when compared with carcass yield (44.11%) of lambs fed with 15% of sunflower seed inclusion. The proportion of muscle and total fat, as muscle:fat ratio were affected (P<0.05) by feeding, with higher quantity of muscle (63.15%) and less fat (16.63%) in the leg and loin cuts of lambs fed without sunflower seeds. In the leg was observed higher proportions of muscle (67.27%), muscle:bone ratio (4.08) and muscle:fat ratio (4.92) when compared with the loin cut. The water retention capacity and shearing force of Longissimus lumborum muscle showed better results when compared with Semimembranosus muscle. The inclusion of sunflower seeds in the diet of feedlot lambs increased the fat deposition in carcass cuts, however did not affect the other parameters of meat quality.

Correlação e análise de trilha de produtividade de grãos e seus componentes e caracteres de planta em cártamo (Carthamus tinctorius L.) e mamona (Ricinus communis L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Componentes do rendimento, qualidade de sementes e características tecnológicas em cultivares de feijoeiro

Pós-graduação em Agronomia (Agricultura) - FCA