Análise e síntese de um processador digital wavelet

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modified routine for decreasing numeric oscillations at associations of lumped elements

Some changes in the application of the numeric trapezoidal integration are analyzed for applications considering pi circuits. It is considered numeric and computational proceedings for improving the numeric results obtained with associations of pi circuits. In numeric integration solutions of the linear systems, it is common to represent these associations of pi circuits by only one matrix. This representation introduces undesirable numeric oscillations in simulations of the dynamics of wave propagation in electrical systems. The proposed changes improve the results of application of cascades of pi circuits associated to the trapezoidal integration, avoiding that the numerical oscillations, or Gibb's oscillations, have high values and are slowly damped. For the carried out simulations, different number of pi circuits and voltage sources are checked, confirming the reduction of the influence of the numeric oscillations on the obtained results. (C) 2014 Elsevier B.V. All rights reserved.

Comparação entre métodos e análise de correntes de curto-circuito

Overcurrents may endanger the whole electrical system and living beings, they are the result of short circuits and failures that can occur in electrical systems, no matter how well designed they are. Therefore it is important to predict these failures with analysis of electrical systems to make it possible to design appropriate protections, to ensure that those intervene properly and avoid technical and mainly human losses. However there is no standard for calculation of the short circuit currents, the main authors of the national literature about the subject suggest various methods, knowing the particularities among them provides quick and easy choice and proper application of them. To do so, a base case from an electrical system that presents a short circuit is chosen, which will be analyzed using the methods presented

Desenvolvimento de um computador de bordo para veículo Baja-SAE

The objective of this paper is show the development of an Eletronic Control Unit (ECU) for Baja-SAE vehicles from its requirements to final implementation. An ECU for Baja-SAE vehicles is made of electric and electronic circuits (appropriated to the hostile situations of an off-road competition) able to make important measurements for the running or stand-by vehicle performance. For this development, some concepts were studied: embedded electronics concepts (mainly microcontrollers and data acquisition circuits) and sensoring. Both the studies were made considering the off-road environment. After these initial studies, the elaboration of the basics hardware and software (under simulations) has begun, and this elaboration objectives maximum performance and low implementation cost. After the theorical studies, basic definition of the hardware and software’s architectures and simulations, the printed circuit boards (PCB) were made, as exhaustive tests in these boards for debugging and verify if the boards work well. Once the system was tested in the university, it ran into a regional Southeast competition in 2010, that definitely proved the efficiency of the whole system

Caracterização e redução das oscilações espúrias resultantes da representação de linhas de transmissão por meio de elementos discretos de circuitos

Pós-graduação em Engenharia Elétrica - FEIS

Análise de desempenho de redes de comunicação wireless em aplicações de Smart Grid

Pós-graduação em Engenharia Elétrica - FEIS

Planejamento dinâmico a longo prazo de ativos de sistemas de distribuição de energia elétrica considerando a incorporação de diferentes tipos de elementos adicionais de expansão

Pós-graduação em Engenharia Elétrica - FEIS

Estudo da demanda energética e desagregação do solo em diferentes sequências operacionais de preparo periódico

The correct selection of the operational sequence of soil tillage is essential to reduce the cost of agricultural mechanization in the regions that mobilize intensively the soil. The objective of this work was to evaluate the energetic demand and disaggregation of the soil in different operational sequences of subsoiling and systems of periodic soil tillage. The experimental design was blocks at random, in a factorial model 5 x 2 with 5 replications, being 5 tillage systems (D - Disc plow, Dn - disc plow followed at leveler rail, G - weight rail, Gn - weight rail followed of leveler rail and E - Stirrer.) and two sequencies of subsoiling (SP - Subsoiling - tillage and PS - Tillage - subsoiling). There were evaluated the energetic demand, fuel consumption by area and the soil disaggregation. The results showed that the operational sequence tillage of the soil subsoiling (PS) had a lower energetic requirement, except for the stirrer, the sequence tillage the soil - subsoiling consumed less fuel and soil disaggregation didn't show statistic variation.

Prevenção da síndrome metabólica em crianças obesas: uma proposta de intervenção

OBJETIVO: Analisar o efeito de 12 semanas de intervenção envolvendo prática de atividade física, orientações alimentar e psicológica sobre fatores de risco para o desenvolvimento da síndrome metabólica em crianças e adolescentes obesos. MÉTODOS: Estudo longitudinal com 23 crianças e adolescentes obesos, com idade entre seis e 16 anos (12,0±3,2 anos). Foram mensurados: gordura corporal total e de tronco, glicemia, colesterol total e triglicérides, pressão arterial sistólica e diastólica. Os jovens foram submetidos a três sessões semanais de 60 minutos de exercício físico (atividades esportivas recreativas, ginástica, circuitos e caminhadas), durante 12 semanas. O teste do qui-quadrado foi usado para comparar dados categóricos daqueles que apresentaram valores acima das recomendações para cada fator de risco. O teste t para dados pareados foi aplicado para comparar os dois momentos do estudo. RESULTADOS: em indivíduos com alterações metabólicas no início do estudo, observou-se, após a intervenção, a diminuição de 11,6% na glicemia (105 para 93mg/dL; p=0,046) e de 24,9% no triglicérides (217 para 163mg/dL; p=0,013); porém, não houve diferenças na pressão arterial e no colesterol total. CONCLUSÕES: O programa de exercício físico aplicado nas crianças e adolescentes foi eficiente para melhorar os valores de glicemia e triglicérides.

Neural network based estimation of torque in induction motors for real-time applications

Induction motors are largely used in several industry sectors. The selection of an induction motor has still been inaccurate because in most of the cases the load behavior in its shaft is completely unknown. The proposal of this article is to use artificial neural networks for torque estimation with the purpose of best selecting the induction motors rather than conventional methods, which use classical identification techniques and mechanical load modeling. Since proposed approach estimates the torque behavior from the transient to the steady state, one of its main contributions is the potential to also be implemented in control schemes for real-time applications. Simulation results are also presented to validate the proposed approach.

A multisampling time-domain CMOS imager with synchronous readout circuit

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A current-mode based Field-Programmable Analog Array for signal processing applications

This paper presents a new approach to develop Field Programmable Analog Arrays (FPAAs),(1) which avoids excessive number of programming elements in the signal path, thus enhancing the performance. The paper also introduces a novel FPAA architecture, devoid of the conventional switching and connection modules. The proposed FPAA is based on simple current mode sub-circuits. An uncompounded methodology has been employed for the programming of the Configurable Analog Cell (CAC). Current mode approach has enabled the operation of the FPAA presented here, over almost three decades of frequency range. We have demonstrated the feasibility of the FPAA by implementing some signal processing functions.

Representação de linhas de transmissão por meio de variáveis de estado levando em consideração o efeito da freqüência sobre os parâmetros longitudinais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulation Tools for Power Electronics Courses Based on Java Technologies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Low voltage four-quadrant current multiplier: an improved topology for n-well CMOS process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)