Variable structure controller and observer applied to induction machine

This work will propose the control of an induction machine in field coordinates with imposed stator current based on theory of variable structure control and sliding mode. We describe the model of an induction machine in field coordinates with imposed stator current and we show the design of variable structure control and sliding mode to get a desirable dynamic performance of that plant. To estimate the inaccessible states we will use a state observer (estimator) based on field coordinates induction machine. We will present the results of simulations in any operation condition (start, speed reversal and load) and with parameters variation of the machine compared to a PI control scheme.

Morphology of the head and frontal gland in neotropical Nasutitermitinae (Isoptera, Termitidae)

The Nasutitermitinae species are the most diverse and derived of the Isoptera. The phylogeny of this subfamily has been a point of divergence. In an attempt to solve this problem, we propose the use of the morphological features of the head, frontal gland and its associated muscles as phylogenetic characters in some Nasutitermitinae genera. Results found about the head and frontal gland morphology are discussed and suggested to be used in future systematic studies of termites.

Effects of direction and curvature on variable error pattern of reaching movements

A number of studies have analyzed various indices of the final position variability in order to provide insight into different levels of neuromotor processing during reaching movements. Yet the possible effects of movement kinematics on variability have often been neglected. The present study was designed to test the effects of movement direction and curvature on the pattern of movement variable errors. Subjects performed series of reaching movements over the same distance and into the same target. However, due either to changes in starting position or to applied obstacles, the movements were performed in different directions or along the trajectories of different curvatures. The pattern of movement variable errors was assessed by means of the principal component analysis applied on the 2-D scatter of movement final positions. The orientation of these ellipses demonstrated changes associated with changes in both movement direction and curvature. However, neither movement direction nor movement curvature affected movement variable errors assessed by area of the ellipses. Therefore it was concluded that the end-point variability depends partly, but not exclusively, on movement kinematics.

Economic design of (X)over-bar charts with variable parameters: the Markov chain approach

This paper presents an economic design of (X) over bar control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an (X) over bar value falls close to the target and is tightened when an (X) over bar value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the (X) over bar chart parameters.

Fatigue crack growth of Al 7475 T761 under constant and variable amplitude loading

Experimental programs in constant and variable amplitude loading were performed to obtain a x N curves and to study retardation in fatigue crack growth due to overloads. The main aim of this research program was to analyse the effect of overload ratio and number of overload peaks. The effect of underloads, before and after the overload blocks was also studied. The generalised equation of Paris-Erdogan type was used for modelling of obtained data on crack propagation under constant amplitude load.

Pesticide residues in artichokes: Effect of different head shape

Residues of three pesticides (dimethoate, parathion, and pyrazophos) in two artichoke cultivars, Masedu and Spinoso sardo, were investigated. The amount of pesticides in artichokes was greatly affected by the head shape. In the case of the calix-shaped Masedu artichoke, the residues in whole heads at commercial ripening were on average about twice higher than those of the pagoda-shaped Spinoso sardo artichoke. In the heart this ratio was 4 to 42 times greater. Residue decay rates were very fast, mainly owing to the dilution effect due to head growth.

Analysis of human papillomavirus prevalence and TP53 polymorphism in head and neck squamous cell carcinomas

Head and neck squamous cell carcinoma is a disease associated with tobacco and alcohol abuse. There is evidence that the oncogenic human papillomavirus (HPV) may also be a risk for upper aerodigestive tract cancers. High-risk HPVs encode two early proteins, E6 and E7, that can bind to p53 and pRb, respectively, and induce its degradation or inactivation. The TP53 gene has a single polymorphism at codon 72 of exon 4 that encodes either arginine (Arg) or proline (Pro). The purpose of this study was to evaluate the role of HPV infection and TP53 polymorphism in head and neck cancer. We analyzed 50 tumors, as well swabs of oral mucosa front 142 control individuals, with a polymerase chain reaction technique. The prevalence of HPV in controls was 10.6% and in cancer specimens 16%. The frequency distribution of genotypes in controls was 50% Arg/Arg, 43% Arg/ Pro and 7% Pro/Pro; in tumors, it was 52% Arg/Arg, 32% Arg/Pro, and 16% Pro/Pro. Contrary to the results of some studies on cervical cancer, no association between any TP53 genotype or allele and the development of head and neck cancer was observed, regardless of HPV status, except for the Pro/Pro genotype, which is associated with the absence of HPV. The arginine allele appears to protect against head and neck cancers. Also, the data showed that HPV infection results in no increased risk of developing head and neck tumors. (C) 2004 Elsevier B.V. All rights reserved.

Variable dose rate application of herbicides using optical sensors

The aim of this study was to develop and evaluate a variable dose rate application of herbicides using an online electronic control based system with optical sensors for weed detection in forested areas. The proposed concept was to apply a basic dose on 100% of the area (aiming to control small weeds) and to apply a complementary patch-spraying dose only on areas with higher weed infestation. For that purpose, a conventional spray boom was adjusted to apply 40% of the herbicide dose on the full area and the optical sensors were used to control the application of the complementary dose (60%) only on areas with higher infestation. The results showed that the system performed adequately. Field applications presented herbicide savings around 20 to 30%, with a similar weed control performance as compared to the full dose application on 100% of the area.

Clinicopathological analysis of head and neck chondrosarcoma: three case reports and literature review

Chondrosarcoma (CHS) is a malignant neoplasm characterized by the formation of cartilaginous matrix by neoplastic cells, with a high propensity for local recurrences. Head and neck CHS is rare, accounting for less than 12% of all cases of CHS, usually affecting the maxilla. The majority of affected patients are in the fourth decade of life, with a slight predilection for male patients. A painless swelling is commonly the most frequent complaint. Surgery with wide en-bloc resection is the preferred treatment for CHS; radiotherapy and chemotherapy are usually palliative options. Owing to its rarity, there are few clinical series evaluating the biological behaviour of head and neck CHS. The aim of this study is to analyse the clinicopathological characteristics of head and neck CHS by reporting 3 new cases of this neoplasia affecting the jaw bones and reviewing the clinical series previously published in the English literature.

The Variable Sample Size (X)over-bar Chart with Estimated Parameters

The VSS X chart, dedicated to the detection of small to moderate mean shifts in the process, has been investigated by several researchers under the assumption of known process parameters. In practice, the process parameters are rarely known and are usually estimated from an in-control Phase I data set. In this paper, we evaluate the (run length) performances of the VSS chart when the process parameters are estimated, we compare them in the case where the process parameters are assumed known and we propose specific optimal control chart parameters taking the number of Phase I samples into account.

Built to Bite: Feeding Kinematics, Bite Forces, and Head Shape of a Specialized Durophagous Lizard, Dracaena Guianensis (Teiidae)

Most lizards feed on a variety of food items that may differ dramatically in their physical and behavioral characteristics. Several lizard families are known to feed upon hard-shelled prey (durophagy). Yet, specializations toward true molluscivory have been documented for only a few species. As snails are hard and brittle food items, it has been suggested that a specialized cranial morphology, high bite forces, and an adapted feeding strategy are important for such lizards. Here we compare head and skull morphology, bite forces, and feeding kinematics of a snail-crushing teiid lizard (Dracaena guianensis) with those in a closely related omnivorous species (Tupinambis merianae). Our data show that juvenile D. guianensis differ from T. merianae in having bigger heads and greater bite forces. Adults, however, do not differ in bite force. A comparison of feeding kinematics in adult Dracaena and Tupinambis revealed that Dracaena typically use more transport cycles, yet are more agile in manipulating snails. During transport, the tongue plays an important role in manipulating and expelling shell fragments before swallowing. Although Dracaena is slow, these animals are very effective in crushing and processing hard-shelled prey. J. Exp. Zool. 317A:371381, 2012. (c) 2012 Wiley Periodicals, Inc.

Second Primary Tumors in Patients with Head and Neck Cancer

This is a review on second primary tumors in patients with head and neck cancer. These patients have a high risk of developing other cancers simultaneously or subsequently. The incidence of multiple primary tumors in this population can be as high as 27%. Recurrences are the most common cause of treatment failure within the first 2 years of follow-up. After the third year the diagnosis of a second primary tumor becomes the most important cause of morbimortality in head and neck cancer patients, especially in those treated for cancers early diagnosed. Most second primary tumors occur in the upper aerodigestive tract (40%-59%), lung (31%-37.5%), and esophagus (9%-44%). Patients who develop second primary tumor have a significant reduction of survival expectancy.

Analysis of the TAX1BP1 gene in head and neck cancer patients

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)