Polyaniline mixed LB films exposed to X-rays

X-ray irradiation is shown to affect electronic properties of polyaniline (PANi) in composite Langmuir-Blodgett (LB) films of PANi and cadmium stearate, in a similar way to acid doping. The time it takes for the shift in the UV-vis spectra, characteristic of PANi doping, increases linearly with the film thickness, thus indicating a surface-controlled process. The humidity of the environment under which the films are irradiated is also of extreme importance. No shin is observed under vacuum or under dry atmospheres of N-2, O-2 and Ar. For humid environments the time for the shift decreases with increasing relative humidity.

Preparation and Characterization of Ti-15Mo Alloy used as Biomaterial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sealability of MTA and calcium hydroxide-containing sealers

Objectives: The aim of this study was to evaluate the apical sealability of Fillapex (R), Endo-CPM-Sealer (R) and Sealapex (R). Material and Methods: Ninety-four freshly extracted single-rooted teeth were selected and decoronated. All teeth were radiographed to confirm the existence of a single and straight root canal, which was prepared using Protaper Universal and 2.5% sodium hypochlorite. The teeth were randomly divided in groups of 10 specimens each according to the sealer, and the canals were filled using the single cone technique and one of the sealers. Four additional teeth were used as controls. The teeth were submitted to dye leakage with Rhodamine B for 24 h but using vacuum on the initial 15 min. Thereafter, they were cut longitudinally and the leakage was measured in a linear fashion from apex to crown. Data were analyzed by ANOVA and Tukey's tests at 5% significance level. Results: Fillapex (R) and Sealapex (R) showed significantly less dye leakage than Endo-CPM-Sealer (R) (p<0.05). Conclusions: It was concluded that Fillapex (R) and Sealapex (R) were able to prevent apical dye leakage differently from Endo-CPM-Sealer (R).

The Effect of Coating Patterns with Spinel-Based Investment on the Castability and Porosity of Titanium Cast into Three Phosphate-Bonded Investments

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of two alternative methods for disinfection of toothbrushes and tongue scrapers

Objective: The aim of this study was to investigate the effectiveness of two alternatives methods for the disinfection of oral cleaning devices. Methods: One type of toothbrush and two types of tongue scrapers (steel and plastic) were tested in this study. Sixteen specimens of each group were cut with standardized dimensions, contaminated separately with Candida albicans, Streptococcus mutans and Staphylococcus aureus and incubated for 24 h. After this, oral cleaning devices were washed in saline solution to remove non-adhered cells and divided into two groups (n = 8), one irradiated in microwave and other immersed in 3.78% sodium perborate solution, and evaluated for microbial recovery. The values of cfu of each group of microorganism after disinfection were compared by Kruskal-Wallis and Dunn non-parametric test, considering 95% of confidence. Results: The toothbrush harboured a significant larger number of viable organisms than the tongue scrapers. The steel tongue scraper was less susceptible to adhesion of the three oral microorganisms. The time required to inactivate all contaminating microorganisms using microwave oven was 1 min and, for the immersion in 3.78% sodium perborate solution, was 2 and 3 h, respectively, for C. albicans and S. mutans/S. aureus. Conclusion: Microwave irradiation proved to be an effective alternative method to the disinfection of tongue cleaners and toothbrushes.

Apical Sealing Quality of In Vitro Apicectomy Procedures After Using Both Er:YAG and Nd:YAG

The aim of this study was to evaluate the apical sealing of dentinal tubules after root-end surface cutting by using Er:YAG and Nd:YAG lasers. After root-canal instrumentation and filling, apices of 50 extracted maxillary canine human teeth were resected by Er: YAG with 400 mJ, 10 Hz, for 30 sec. The samples were randomly assigned to five groups (n = 10): (GI) treated without root-end cavity, but with Nd: YAG (1.0W, 10 Hz, 20 sec) for dentinal tubules sealing; (GII) treated with root-end cavity without the use of Nd: YAG; (GIII) treated with root-end cavity and Nd: YAG application; (GIV) treated with root-end cavity made by Er: YAG with no focus and without Nd: YAG application; and (GV) treated without root-end cavity and without Nd: YAG application. The root-end cavities were performed by using Er: YAG at 300 mJ, 10 Hz, for 20 sec. Subsequently, all teeth were waterproofed and immersed in 2% methylene blue for 48 h in a vacuum environment. The samples were longitudinally sectioned, and microleakage was measured. ANOVA and the Fisher LSD test showed that GIV was less susceptible to microleakage than were the other groups (p < 0.05). Interestingly, the use of the Er: YAG with no focus showed superior dentinal tubule sealing in comparison with the other groups, even with or without root-end cavity and Nd: YAG application.

Mechanical Strength and Analysis of Fracture of Titanium Joining Submitted to Laser and Tig Welding

This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG) welds in cylindrical rods of commercially pure titanium (cp Ti) with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and positioned in a plasma arc welding machine under argon atmosphere and vacuum, and titanium was injected under vacuum/pressure. The samples were X-rayed to detect possible welding flaws and randomly assigned to three groups to test the tensile strength and the fracture mechanism: intact, laser welding, and TIG welding. The tensile test results were investigated using ANOVA, which indicated that the samples were statistically similar. The fracture analysis showed that the cpTi samples subjected to laser welding exhibited brittle fracture and those subjected to TIG welding exhibited mixed brittle/ductile fracture with a predominance of ductile fracture with the presence of microcavities and cleavage areas. Intact samples presented the characteristic straightening in the fracture areas, indicating the ductility of the material.

Avaliações sensoriais, bioquímicas e microbiológicas do guacamole, um produto à base de abacate, sob armazenamento a frio e com adição de ácido ascórbico

The elaboration of avocado products for commercialization keeping their characteristics of fresh product has been limited. The cut avocado darkens quickly and their sensorial characteristics are modified with the storage. In the present research, the sensorial parameters, microbiological stability, and peroxidase and polyphenoloxidase activity were evaluated in guacamole added with ascorbic acid and conserved under low temperature, by using avocado variety Hass. Products were conditioned in polyethylene+nylon packages with and without vacuum application; then, they were subjected to the slow and fast freezing (-18 degrees C) and stored in freezer (-18 degrees C). Evaluations were performed at the moment of elaboration of the product (t0) and at 3, 7 and 30 days post-storage. At t30, samples were kept under refrigeration (4 +/- 1 degrees C) and evaluated at 3, 5 and 7 days. After the 30 days of storage, -18 degrees C under freezing, followed by thawing and keeping at 4 +/- 1 degrees C for 7 days, the notes for the sensorial parameters decreased. The peroxidase activity was totally inhibited in the elaborated product and the polifenol oxidase activity considerably decreased in the guacamole (20.07 mM catechol/g fresh matter) relative to those in the fruit (58.31 mM catechol/g fresh matter), however with no significant variation during storage (at -18 degrees C). The samples were microbiologically stable under the conditions of the present study. The addition of ascorbic acid contributed to the conservation of the frozen avocado product by decreasing the enzymatic activity. However, the sensorial parameters are prejudiced under thawing and storage at 4 +/- 1 degrees C.

Mandioca minimamente processada submetida a radiação gama

Fresh cut cassava is an alternative to prolong roots commercialization period, adding value to the raw material and assisting the consumer's needs that seeks for products of easy preparation. The aim of this work was to evaluate the quality of fresh cut cassava subjected to gamma radiation. For processing cassava roots (IAC - 567-70) were used, after preparation were packed in expanded polystyrene (EPS) trays, covered by low density polyethylene (LDPE) plastic film, being subjected to gamma radiation in the doses 0 (control), 0.5; 1.0; 1.5; 2.0 KGy. Another treatment was also carried out in which roots were vacuum packed in nylon + polyethylene. Packed roots of all treatments were stored under refrigeration (5 +/- 1 degrees C) and evaluations were made after 0, 3, 6, 9 and 12 days. Evaluated analyses were: titrable acidity, pH, firmness, coloration, polyphenoloxidase activity, cooking time and roots hydration percentage. Evaluations just proceeded until the nine storage day, because after this period the roots already presented visually detectable physiologic and microbiological alterations. For titrable acidity, the vacuum packed roots had the lowest values, followed by the control packed in trays. For the other treatments, values of acidity increased and influenced the pH values. For the other appraised parameters there was no significant difference among treatments, but alterations were observed with the storage. The firmness decreased with the storage. Brightness values and yellow color component decreased with the storage and the b * (green) color values increased. Polyphenoloxidase activity was maximum in the day of elaboration of the product and it decreased with the storage. Cooking time and roots hydration percentage decreased with the roots storage.

X-ray photoelectron spectroscopy, x-ray absorption spectroscopy, and x-ray diffraction characterization of CuO-TiO2-CeO2 catalyst system

X-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and x-ray absorption spectroscopy (XAS) techniques have been applied to characterize the surface composition and structure of a series of CuO-TiO2-CeO2 catalysts. For a small loading of cerium, ceria was mainly dispersed on the titania surface and a minor amount of CeO2 crystallite appeared. At higher loading of cerium, the CeO2 phase increased and the atomic Ce/Ti ratio values were smaller than the nominal composition, as a consequence of cerium agglomeration. This result suggests that only a fraction of cerium can be spread on the titania surface. For titanium-based mixed oxide, we observed that cerium is found as Ce3+ uniquely on the surface. The atomic Cu/(Ce+Ti) ratio values showed no influence from cerium concentration on the dispersion of copper, although the copper on the surface was shown to be dependent on the cerium species. For samples with a high amount of cerium, XPS analysis indicated the raise of second titanium species due cerium with spin-orbit components at higher binding energies than those presented by Ti4+ in a tetragonal structure. The structural results obtained by XAS are consistent with those obtained by XRD and XPS. (C) 2001 American Vacuum Society.

Chemical and structural characterization of V2O5/TiO2 catalysts

A series of V2O5/TiO2 samples was synthesized by sol-gel and impregnation methods with different contents of vanadia. These samples were characterized by x-ray diffraction (XRD), Raman spectroscopy, x-ray photoelectron spectroscopy (XPS), and electronic paramagnetic resonance (EPR). XRD detected rutile as the predominant phase for pure TiO2 prepared by the sol-gel method. The structure changed to anatase when the vanadia loading was increased. Also, anatase was the predominant phase for samples obtained by the impregnation method. Raman measurements identified two species of surface vanadium: monomeric vanadyl (V4+) and polymeric vanadates (V5+). XPS results indicated that Ti ions were in octahedral position surrounded by oxygen ions. The V/Ti atomic ratios showed that V ions were highly dispersed on the vanadia/titania surface obtained by the sol-gel method. EPR analysis detected three V4+ ion types: two of them were located in axially symmetric sites substituting for Ti4+ ions in the rutile structure, and the third one was characterized by magnetically interacting V4+ ions in the form of pairs or clusters. A partial oxidation of V4+ to V5+ was evident from EPR analysis for materials with higher concentrations of vanadium. (C) 2001 American Vacuum Society.

Schottky emission in nanoscopically crystallized Ce-doped SnO2 thin films deposited by sol-gel-dip-coating

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Optimization Strategies Based on Sequential Quadratic Programming Applied for a Fermentation Process for Butanol Production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The moving gardens: Reef fishes grazing, cleaning, and following green turtles in SW Atlantic

Reef fishes may associate with marine turtles and graze on their shells, or clean their head, neck and flippers. on a reef flat at Fernando de Noronha Archipelago, SW Atlantic, we recorded green turtles (Chelonia mydas) grazed, cleaned and followed by reef fishes. The green turtle seeks specific sites on the reef and pose there for the grazers and/or cleaners. Fishes recorded associated to green turtles included omnivorous and herbivorous reef species such as the dam-selfish Abudefduf saxatilis and the surgeonfishes Acanthurus chirurgus and A. coeruleus. The turtle is followed by the wrasse Thalassoma noronhanum only while engaged in foraging bouts on benthic algae. Following behaviour is a previously unrecorded feeding association between turtles and fishes.

Daily cleaning activity and diversity of clients of the barber goby, Elacatinus figaro, on rocky reefs in southeastern Brazil

Gobies of the genus Elacatinus are regarded as the most specialised cleaner fishes in the western tropical Atlantic, yet there are no studies on these cleaners in the southern portion of West Atlantic. We studied the diversity of clients and the daily cleaning activity of the barber goby, Elacatinus figaro, on rocky reefs in southeastern Brazil (23-24 degrees S). A total of 34 fish client species in 16 families were recorded over 484 cleaning events. The most frequent clients were damselfishes, Pomacentridae (37.9% of cleaning events) and grunts, Haemulidae (16.9%). Planktivores were the most frequently attended trophic category, and two species in that category accounted for about a half (44%) of the total cleaning events. Size of clients ranged 4.5-55 cm and most individuals were medium-sized (12-30 cm); as the barber goby ranged 2-4.5 cm, clients were 1.5 to 15 times larger than the cleaner was. Cleaning activity started at dawn and ended shortly before nightfall, the highest frequency of interactions occurring at early morning (nocturnal clients) and mid-afternoon (diurnal clients). By midday the frequency of cleaning events decreased and their duration increased. A total of 109 +/- 3 cleaning events and 30 +/- 1 min of cleaning activity were estimated per cleaning station per day, both figures low when compared to those recorded for cleaner fishes in tropical areas of the western Atlantic and Indo-Pacific.