Multiperiodic magnetic structures in Hubbard superlattices

We consider fermions in one-dimensional superlattices (SL's), modeled by site-dependent Hubbard-U couplings arranged in a repeated pattern of repulsive (i.e., U>0) and free (U=0) sites. Density matrix renormalization group diagonalization of finite systems is used to calculate the local moment and the magnetic structure factor in the ground state. We have found four regimes for magnetic behavior: uniform local moments forming a spin-density wave (SDW), floppy local moments with short-ranged correlations, local moments on repulsive sites forming long-period SDW's superimposed with short-ranged correlations, and local moments on repulsive sites solely with long-period SDW's; the boundaries between these regimes depend on the range of electronic densities ρ and on the SL aspect ratio. Above a critical electronic density, ρ↑↓, the SDW period oscillates both with ρ and with the spacer thickness. The former oscillation allows one to reproduce all SDW wave vectors within a small range of electronic densities, unlike the homogeneous system. The latter oscillation is related to the exchange oscillation observed in magnetic multilayers. A crossover between regimes of thin to thick layers has also been observed.

Utilization of fish protein hydrolysate in prepared diets for pacu, Piaractus mesopotamicus, larvae

Growth and survival rates of pacu, Piaractus mesopotamicus, larvae fed prepared diets containing different animal protein sources were evaluated. Four diets with the same level of crude protein (CP) (36%) and calories (4.02 kcal gross energy/g of diet) were fed to the larvae. Diets were formulated to contain one of four protein sources: (1) fish meal (FM), (2) tilapia residue silage (TS), (3) protein hydrolysate from tilapia residue (HT), and (4) eviscerated tilapia residue (HET). Larvae were fed Artemia nauplii for six days, prior to the start of the study, and the prepared diet was supplied from day 7 until the study concluded. Variance analysis showed no significant differences (P > 0.05) for survival rates and larval final lengths among treatments. However, final average weights were significantly different (P < 0.05 for larvae fed FM and HT. Average survival rates were relatively high and ranged from 68.1% to 73.9%. After the live food was replaced by prepared diets, no larval growth was observed for any treatment. Fish protein hydrolysate (HT and HET) and fish silage showed potential to be used as ingredients in the diet of pacu larvae. However, hydrolysate inclusion levels, processing methods to minimize nutrient lixiviation, and the best moment to replace live food with an inert diet (weaning) need further investigation. © 2003 by The Haworth Press, Inc. All rights reserved.

Lack of genotoxicity of formocresol, paramonochlorophenol, and calcium hydroxide on mammalian cells by comet assay

Formocresol, paramonochlorophenol, and calcium hydroxide are widely used in dentistry because of their antibacterial activities in root canal disinfection. However, the results of genotoxicity studies using these materials are inconsistent in literature. The goal of this study was to examine the genotoxic potential of formocresol, paramonochlorophenol, and calcium hydroxide using mouse lymphoma cells and human fibroblasts cells in vitro by the comet assay. Data were assessed by Kruskal-Wallis nonparametric test. The results showed that all compounds tested did not cause DNA damage for the tail moment or tail intensity parameters. These findings suggest that formocresol, paramonochlorophenol, and calcium hydroxide do not promote DNA damage in mammalian cells and that the comet assay is a suitable tool to investigate genotoxicity.

Comparative field test between two sugar cane (Saccharum spp.) harvesters under two different operational conditions in Brazil

The sugar cane crop is one of the main products in Brazil and according to several authors can generate, besides the industrialized stalks, an amount of crop residues from the order of 15 to 30 % in weight of the aerial part of the plants, depending on the field conditions. The sugar cane area in Brazil is around 5.5×106 hectares, with an amount of 400.106 tons of stalks, with stalks yield of 72 tons.ha-1. This study took place in a sugar cane plot (Latitude 22°46'S, Longitude 47°23'W and 600m of altitude) with 3% of slope, located in São Paulo State. The sugar cane variety was SP 80-1816, in its forth cut, 11 months old and with a planted row spacing of 1.40 m. By other side, several sugar mills are bringing the crop residue to their patio to produce energy with the bagasse. One choice is to bring the crop residue at the same moment with the stalks, avoiding the next operation of baling it. The objective of this study was to analyze some operational parameters of two different sugar cane harvesters under the same field conditions, which was divided in four treatments: T1 = CAMECO CHT2500B operating normally; T2 = CAMECO CHT2500B operating without the cleaning system; T3 = CASE 7700 operating normally; T4 = CASE 7700 operating without the cleaning system. The results obtained were: Table presented CEB = Gross effective capacity; CEL = Net effective capacity. The conclusion is that under normal operation the CASE harvester worked better then CAMECO in the parameters CEL stalks and Manipulation efficiency. And without the cleaning system operating CASE also worked better in the parameters of CEB raw material, CEB stalks, CEL raw material and CEL stalks.

Efeitos da dessecação de plantas de soja no potencial fisiológico e sanitário das sementes

The objective of this paper was to verify the ideal moment of application of desiccants on the soybeans crop, to obtain seeds with maximum physiological and sanitary quality. The cultivar IAC-15 was sowed at the experimental area of FE/UNESP - Campus of Ilha Solteira, located in the district of Selvíria, State of Mato Grosso do Sul (20° 22′S, 51° 22′W at approximately 335 m of altitude). The experimental design was a randomized block, with treatments in a factorial scheme of 3×3 and 4×4 (dessicant x application time), in 1996/97 and 1997/98, respectively. The desiccants applied during the season agricultural year 1996/97 were: paraquat, diquat, paraquat+diquat mix at the doses 400; 300; 200+150 e 400 g a.i.ha -1, respectively. In 1997/98 the same desiccants were used, at the same doses, with additional treatment application of ammonium glufosinate at the dose of 400 g a.i.ha -1. The desiccants were applied three times in 1996/97 and four times in 1997/98 with 5 days intervals starting at the R 6 stage. According to the environmental conditions of this research the best desiccation time was when soybean plants had 80% to 90% of pods with yellow and brown coloration and seeds with 45% to 60% of water content. There were no effects of any of the desiccants tested in the physiological and sanitary potential required for commercialization of the seeds.

Maturidade fisiológica das sementes do ipê amarelo, Tabebuia chrysotricha (Mart. Ex DC.) Standl

Ipê amarelo Tabebuia chrysotricha (Mart. Ex DC.) Standl. is a native forest species that presents heavy and durable wood: it is common to be used for urban arborization. The species is latte secondary and heliophyta. Occurs from Espirito Santo State until Santa Catarina in the Pluvial Atlantic Forest (Mata Atlântica). The seedling production is hard because their seeds have short longevity after dispersion, and so due to the difficulty to harvest winged seeds that are quickly dispersed by the wind. The present study was carried out to evaluate the physiological maturity of Ipê Amarelo seeds, to establish the best moment to harvest them. The study was to accompany the maturation of 100 fruits in just beginning development, from eleven different trees. Morphological characteristic measures were made weekly, with fruits still on trees, starting from the second week development when fruits presented the following averages: 6.3 cm length, 0.71 cm thickness, and 0.82 cm width. From the sixth week of fruit development we harvest them to proceed the germination test, water content rate, and electric conductivity test. The germination has begun by the seventh week development with 28% of germinated seedlings. The highest germination rate happened by the eighth week development, with 74.5% of germinated seedlings and on the ninth week the rate decrease to 65.5%, when the seeds were already in dispersion. Through the electric conductivity test the highest value obtained was 378.06 μS.g -1.cm -1 on the seventh week development and the lowest one was 183.28 μpS.g -1.cm -1 on eighth week. These results support those obtained in the germination test, because as higher is the electric conductivity of seeds, as higher is their deterioration level. Finally, the study allows concluding that the physiological maturation of ipê amarelo seeds has occurred before dispersion close to the eighth week development when fruits presented the following averages: 22.2 cm length, 1.37 cm width, and 1.05 cm thickness; water content rate was 61.8% and electric conductivity was 183.28 μS.g -1.cm -1. In that moment, the fruits presented greened brown coloration and started to show fissures.

Fiberglass-reinforced glulam beams: Mechanical properties and theoretical model

The glued-laminated lumber (glulam) technique is an efficient process for making rational use of wood. Fiber-Reinforced Polymers (FRPs) associated with glulam beams provide significant gains in terms of strength and stiffness, and also alter the mode of rupture of these structural elements. In this context, this paper presents a theoretical model for designing reinforced glulam beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

Theoretical model and experimental analysis of glulam beam reinforced with FRP

This work present a study of glulam beams reinforced with FRP. It was developed a theoretical model that calculates strength and stiffness of the beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

Rod length influence in torque measurement of SPT-T test

Since Ranzini suggested supplementing the SPT test with measurement of the torque required to turn the split spoon sampler after driving, many Brazilian engineers have been using this in the design of pile foundations. This paper presents a study of the rod length influence in the torque measurement. A theoretical study of material resistance considering torsion and bending in a thin wall tubular steel shaft was performed. It makes possible to conclude that the shearing tension caused by the proper weight represents less than 1% of the shearing tension caused by the turning moment. In addition, an experimental study was done with electric torquemeters fixed in a horizontal rod system. The tests were being carried out to analyze rods of one meter to twenty meters in length and the measurements were collected at the ends of each rod length verifying the efficiency data. As a result, it is possible to verify that the torque difference through rod length is lower than minimum scales of mechanical torquemeters that are used on practical engineering. Also a fact to be considered is a big torque loss for values under 20 N.m of applied torque. This way, the SPT-T is not adequate to low consistency soil. Copyright ASCE 2007.

Multidrug-resistant urinary tract isolates of Escherichia coli from Ribeirão Preto, São Paulo, Brazil

Multiple resistances to antimicrobial drugs arising in Escherichia coli isolates may complicate therapeutic management of urinary tract infection (UTI) by this organism. In order to assess the multidrug resistance (MDR) among urinary E. coli isolates, we have tested 11 antimicrobial drugs against 67 isolates from outpatients attended in a tertiary-care teaching hospital and of 78 isolates from a municipal health unit, respectively in Ribeirão Preto, State of São Paulo, Brazil. Seventy-six percent and 22% of the isolates from the tertiary-care hospital and the municipal unit, respectively, were resistant to three or more different classes of agents, and were considered to present MDR. Among the isolates from the hospital patients, 73.0%, 65.0%, 58.0%, 58.0% and 31.0% were resistant to tetracycline, ampicillin, cephalothin, trimethoprim-sulfamethoxazole (TMP/SMX) and norfloxacin, respectively; resistance from the municipal unit patients were 31.0%, 37.0%, 8.0%, 29.0% and 12.0% respectively, to the same drugs. The predominant phenotype among the MDR isolates presented is ampicillin, TMP/SMX and tetracycline resistance. The high prevalence of drug resistance among UTI patients calls for continuous surveillance to assure effective control of this infection. © 2007 by The Brazilian Journal of Infectious Diseases and Contexto Publishing. All rights reserved.

O papel das argininas alfa-92 e alfa-141 na regulação das propriedades funcionais de hemoglobinas por íons cloreto

The oxygenation of human Hb (HbA) demands a three state model: two deoxy states To and Tx, free and complexed with anions respectively, and an oxy R state. The regulation between these states is modulated by the presence of anions, such as chloride, that binds to T state. The b inding if chloride, however, remains controversial. The aim of this work is the study of arginines 92a (a1ß2 interface) and 141a (C-terminal) as chloride binding sites. To investigate that, we have studied 92 and 141 site directed mutant species: natural mutants Hb J-Cape-Town (R92Q), desArg (R141Δ), Chesapeake (R92L), and the constructed Chesapeake desArg (R92L,141Δ). We expressed Hbs in Escherichia coli and purified. Through oxygen binding curves we measured affinity and cooperativity, in function of water effect and Bohr effect in presence and absence of chloride. Structural features were obtained through 1H NMR spectroscopy Oxygen binding properties and Bohr effect measured indicated a higher affinity and lower cooperativity in absence and presence of chloride for all mutants. Structural changes represent functional aspects of mutant Hbs, such as a significant rise in affinity or a change in cooperativity. Water activity studies conducted as a function of chloride concentration showed that the only Hb desArg follows the thre state model. The other mutant Hbs do not exhibit the Tx state, a fact confirmed by the number of water molecules bound to each Hb during the deoxy-oxy transition. This behavior suggests that the Arginine 92 site could be responsible for chloride binding to Hb, since oxygenation of 92 mutant Hbs cannot be adjusted by the three state model. However, Bohr effect showed that all mutant Hbs released~1 proton in chloride presence, different from HbA that releases ~2, suggesting a role for 141 arginine in the tertiary and quaternary Bohr effect.

Estruturas secretoras de Pavonia alnifolia (Malvaceae), uma espécie ameaçada de extinção

Malvaceae shows a rich morphological diversity of secretory structures, which are of great ecological and taxonomical relevance. Nonetheless, until the present moment, studies on the secretory structures of the studied species were not found. Pavonia alnifolia A.St.-Hil. is endangered species of extinction with restricted distribution within the restingas of Rio the Janeiro and Espírito Santo, Brazil. The species were collected from the former and usual techniques on plant anatomy and histochemistry were performed. Anatomical and histochemical studies of the secretory structures of Pavonia alnifolia are showed in this work. The presence of external and internal secretory structures of mucilage in many organs, idioblasts of phenolic and lipid substances and floral nectaries what is a very important adaptative survival mechanism of the species in the restinga environment. The secretion produced by nectaries is envolved with maintenance of interations with visiting insects, what constitutes a good model to experimental studies with an ecological approach.

Flexibility and torsional resistance of three nickel-titanium retreatment instrument systems

Aim To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. Methodology Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n=12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n=12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α=0.05). Results The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. Conclusions The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application. © 2011 International Endodontic Journal.

Magnetothermal instabilities in magnetized anisotropic plasmas

Using the 16-moment transport equations for an ideal anisotropic collisionless plasma we analyze the influence of pressure anisotropy on the magnetothermal (MTI) and heat-flux-driven buoyancy (HBI) instabilities. We calculate the dispersion relation and the growth rates for these instabilities in the presence of a background heat flux and for configurations with static pressure anisotropy, finding that when the frequency at which heat conduction acts is much larger than any other frequency in the system (i.e. weak magnetic field) the pressure anisotropy has no effect on the MTI/HBI, provided the degree of anisotropy is small. In contrast, when this ordering of timescales does not apply the instability criteria depend on pressure anisotropy.

Educative games and expositive lesson: Comparison of educational techniques on sitting posture

Introduction: Studies on education in health are important for the concretion of action of promotion of the health. Objective: To verify the changes of theoretical knowledge on sitting posture, evaluated at two moments (initial and final,) considering two programs of education (expositive lesson and operative groups). Methods: 75 pupils had been citizens, of both the sexes, three 4as series of a public school, evaluated previously (A1) on seated position; group 1 was submitted to a procedure of expositive education, the 2 educative games in the 2 and, the 3 to no intervention. After one week they had been reevaluated (A2). For the moments the test of Wilcoxon was applied and between the Kruskal groups Wallis. Results: In the comparison inside of the groups, of 2 and 3 they had presented increase in the number of rightness on position seated in the after-test, with statistical significant difference, whereas in the group has controlled, such fact did not occur. In the comparison between groups, at the first moment (A1), 2 groups e 3 had not presented significant difference statistical (p > 0,05), however, in as moment notices that it had difference statistics between the three groups (p < 0,01), being that the G3 presented minor frequency of errors (md = 5) in relation to the g2 (md = 8) and g1 (md = 10). Conclusions: It can be affirmed that educative techniques that supply information and promote debates and exchanges of experiences between the participants increase the possibilities of incorporation of the contents related to the sitting posture.