COD, TSS, nutrients and coliforms removals in UASB reactors in two stages treating swine wastewater

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Organic phosphorus fractions in soil fertilized with cattle manure

Inorganic phosphorus (Pi) usually controls the P availability in tropical soils, but the contribution of organic P (Po) should not be neglected, mainly in systems with low P input or management systems that promote organic matter accumulation. The aims of this study were to evaluate the changes in the Po fractions over time in soil fertilized and not fertilized with cattle manure and to correlate Po forms with available P extracted by anion exchange resin. The experiment was carried out under field conditions, in a sandy-clay loam Haplustox. The experimental design was a 2 x 9 randomized complete block factorial design, in which the first factor was manure application (20 t ha(-1)) or absence, and the second the soil sampling times (3, 7, 14, 21, 28, 49, 70, 91, and 112 days) after manure incorporation. Labile, moderately labile and non-labile Po fractions were determined in the soil material of each sampling. Manure fertilization increased the Po levels in the moderately labile and non-labile fractions and the total organic P, but did not affect the Po fraction proportions in relation to total organic P. On average, 5.1 % of total Po was in the labile, 44.4 % in the moderately labile and 50.5 % in the non-labile fractions. Available P (resin P) was more affected by the manure soluble Pi rather than by the labile Po forms. The labile and non-labile Po fractions varied randomly with no defined trend in relation to the samplings; for this reason, the data did not fit any mathematical model.

Removal of total coliforms, thermotolerant coliforms, and helminth eggs in Swine production wastewater treated in anaerobic and aerobic reactors

The present work evaluated the performance of two treatment systems in reducing indicators of biological contamination in swine production wastewater. System I consisted of two upflow anaerobic sludge blanket (UASB) reactors, with 510 and 209 L in volume, being serially arranged. System II consisted of a UASB reactor, anaerobic filter, trickling filter, and decanter, being also organized in series, with volumes of 300, 190, 250, and 150 L, respectively. Hydraulic retention times (HRT) applied in the first UASB reactors were 40, 30, 20, and 11 h in systems I and II. The average removal efficiencies of total and thermotolerant coliforms in system I were 92.92% to 99.50% and 94.29% to 99.56%, respectively, and increased in system II to 99.45% to 99.91% and 99.52% to 99.93%, respectively. Average removal rates of helminth eggs in system I were 96.44% to 99.11%, reaching 100% as in system II. In reactor sludge, the counts of total and thermotolerant coliforms ranged between 10(5) and 10(9) MPN (100 mL)(-1), while helminth eggs ranged from 0.86 to 9.27 eggs g(-1) TS.

The ultra-sonication of minerals in swine feed

A sample preparation method based on ultrasound assisted-extraction (UAE) of Ca, Mg and P from swine feed has been described. The experiment was performed to cover the variables influencing the sonication process and, the method validation using standard reference material. Final solutions obtained upon sonication were analyzed by flame atomic absorption spectrometry (for Ca and Mg) and by UV-vis spectrophotometry (for P). The best conditions for metal extraction were as follows: sample mass: 100 mg in 20 mL 0.10 mol/L HCl, a particle size: <60 μm, sonication time: 5 cycles of 10 s and ultrasound power: 102 W. The UAE method was applied in digestibility assays in different piglet feeds and their results showed that it is highly comparable (P > 0.05) to the other methods used for such purposes, as block digestion, and offered a Ca, Mg and P method of quantification limit of 10.6, 12.4 and 14 mg/kg, respectively. The major advantages of the UAE method compared to other methods are the high treatment rate, low reagent usage in the extracts and, it does not generate toxic residues that might negatively affect human health and the environment, accompanied by good precision and accuracy.

Image-Guided Cryoablation of the Spine in a Swine Model: Clinical, Radiological, and Pathological Findings with Light and Electron Microscopy

This study was designed to present the feasibility of an in vivo image-guided percutaneous cryoablation of the porcine vertebral body. Methods The institutional animal care committee approved this study. Cone-beam computed tomography (CBCT)-guided vertebral cryoablations (n = 22) were performed in eight pigs with short, 2-min, single or double-freezing protocols. Protective measures to nerves included dioxide carbon (CO2) epidural injections and spinal canal temperature monitoring. Clinical, radiological, and pathological data with light (n = 20) or transmission electron (n = 2) microscopic analyses were evaluated after 6 days of clinical follow-up and euthanasia. Results CBCT/fluoroscopic-guided transpedicular vertebral body cryoprobe positioning and CO2 epidural injection were successful in all procedures. No major complications were observed in seven animals (87.5 %, n = 8). A minor complication was observed in one pig (12.5 %, n = 1). Logistic regression model analysis showed the cryoprobe-spinal canal (Cp-Sc) distance as the most efficient parameter to categorize spinal canal temperatures lower than 19 °C (p<0.004), with a significant Pearson’s correlation test (p < 0.041) between the Cp-Sc distance and the lowest spinal canal temperatures. Ablation zones encompassed pedicles and the posterior wall of the vertebral bodies with an inflammatory rim, although no inflammatory infiltrate was depicted in the surrounding neural structures at light microscopy. Ultrastructural analyses evidenced myelin sheath disruption in some large nerve fibers, although neurological deficits were not observed. Conclusions CBCT-guided vertebral cryoablation of the porcine spine is feasible under a combination of a short freezing protocol and protective measures to the surrounding nerves. Ultrastructural analyses may be helpful assess the early modifications of the nerve fibers.

Produção de biomassa e composição química de adubos verdes cultivados no Vale do Ribeira

The contribution of green manure to soil improvement and crop production depends primarily on biomass production and its chemical composition, which vary depending on the species, region and growing season. The aim of this research was to evaluate the chemical composition of biomass produced by green manures in Vale do Ribeira, São Paulo, Brazil. In order to develop this research, was carried an experiment in Pariquera-Acu, in 2006/2007, in completely randomized blocks design with four treatments (three green manure and spontaneous vegetation) and five replications. At 30, 60, 90 and 120 after sowing samples were collected in 1m(2) of the shoots and determined fresh and dry, and chemical composition biomass. Sunhemp, pigeon pea and mucuna produced, in decreasing order, the largest quantities of biomass and were more efficient than the spontaneous vegetation. The biomass produced by green manure had higher quality than that produced by spontaneous vegetation. Sunhemp and pigeon pea have a higher proportion of dry matter in stems which have low N, high C/N and L/N ratio, variables indicating slow decomposition of residues. The analysis of dry matter partitioned to better indication of the chemical composition of the residues and the prevision of the availability of nutrients in the soil.

Characterization and evaluation of the impact of feed management on the effluents of Nile tilapia (Oreochromis niloticus) culture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eutrofização e qualidade da água na piscicultura: consequências e recomendações

The eutrophication (cultural or anthropogenic) is induced by man and can have different origins, such as domestic sewage, industrial and agricultural activities, including the effluent still breeding systems of aquatic organisms. The expansion of aquaculture, with production of biomass and increase of nutrients in water may cause acceleration of productivity of algae, changing the ecology of aquatic systems. In addition, these waste water may present a risk to health through the transfer of pathogens from manure, plant residues, composted material, among others that are major sources of organic waste in some farming systems. Depending on the trophic level of fish ponds, which are dynamic environments, different planktonic species with short reproductive cycle and adapted to the changes contained in these systems can appear in high abundance. Water quality in the systems for raising fish is related to several factors, such as water source, management (liming, fertilizing, cleaning), cultivated species and quantity and composition of exogenous food. In order to minimize environmental impacts, there are techniques to improve the quality of water in fish farming systems and thus satisfactory answers can be obtained through the application of management practices. This paper aims to review the subject that deals with changes in water quality resulting from the activity of freshwater fish culture in Brazil. Search also recommend techniques of good management practices to minimize the impact generated by the activity.

Anaerobic bio-digestion of concentrate obtained in the process of ultra filtration of effluents from tilapia processing unit

The objective of the present study was to evaluate the efficiency of the process of biodigestion of the protein concentrate resulting from the ultrafiltration of the effluent from a slaughterhouse freezer of Nile tilapia. Bench digesters were used with excrements and water (control) in comparison with a mixture of cattle manure and effluent from the stages of filleting and bleeding of tilapias. The effluent obtained in the continuous process (bleeding + filleting) was the one with highest accumulated population from the 37th day, as well as greatest daily production. Gases composition did not differ between the protein concentrates, but the gas obtained with the use of the effluent from the filleting stage presented highest methane gas average (78.05%) in comparison with those obtained in the bleeding stage (69.95%) and in the continuous process (70.02%) or by the control method (68.59%).

Allelopathic plants. 7. Sunflower (Helianthus annuus L.)

Sunflower is an annual dicotyledonous plant, herbaceous, erect and native of North America. It is thermo- and photo-insensitive, hence, can be grown round the year in sub-tropical and tropical countries. Only two spp. H. annuus and H. tuberosum are cultivated for food, remaining spp. are ornamentals, weeds and wild plants. However, H. annuus is allelopathic and inhibit the growth and development of other plants thus reducing their productivity. Much information is available about the allelopathic effects of sunflower crop on following crops in crop rotations. Although it is harmful to all crops, but, is less harmful to crops of Graminae family than other families. It seems that the harmful effects of sunflower in crop rotations are due to release and accumulation of root exudates during crop growth in soil. Soil incorporation of its fresh (green manure) or dry biomass in soil is inhibitory to both crops and weed spp. Several allelochemicals have been characterized from the H. annuus, which inhibit the seed germination and seedling growth of A. albus, A. viridis, Agropyron repens (Elymus repens), Ambrosia artemsiifolia, Avena fatua, Celosia crustata, Chenopodium album, Chloris barbara, Cynodon dactylon, D. sanguinalis, Dactyloctenium ageyptium, Digitaria ciliaris, Echinochloa crus-galli, Flaveria australasica, Parthenium hysterophorus, Portulaca oleracea, Sida spinosa, Trianthema portulacastrum, Veronica perisca the inhibitory effects of this crop may be used for weed management with less herbicides for sustainable agriculture.

Estimativa da área foliar de crotalaria juncea l. a partir de dimensões lineares do limbo foliar

Knowledge of the leaf area plant are needed for agronomic and physiological studies involving plant growth. The aim of this study was to obtain a mathematical model using linear measures of leaf dimensions, which will allow the estimation of leaf area of Crotalaria juncea L. Correlation studies were conducted involving real leaf area (Sf) and leaf length (C), maximum leaf width (L) and the product between C and L. All tested models (linear, exponential or geometric) provided good estimation of leaf area (above 87%). The better fit was attained using linear model, passing or not through the origin. From a practical viewpoint, it is suggested to use the linear model involving the C and L product, using a linear coefficient equal to zero. Estimation of leaf area of Crotalaria juncea L. can be obtained using the model Sf = 0.7160 x (C*L) with a determination coefficient of 0.9712.

Morfologia e avaliação do crescimento inicial de plântulas de Bactris gasipaes Kunth. (arecaceae) em diferentes substratos

Este trabalho teve por objetivos descrever a morfologia dos diásporos, as fases da germinação e determinar o substrato mais adequado para o crescimento inicial de plântulas de pupunha. Periodicamente, unidades representativas de cada fase de germinação foram retiradas para a descrição da seqüência dos eventos morfológicos. Os substratos usados para o crescimento inicial foram Plantmax HT, areia, terra (latossolo roxo) e outro com proporções iguais de terra, areia e esterco (TAE). Avaliou-se o crescimento inicial das plântulas aos 101 dias após o transplante, com base na sua altura, número de folhas, comprimento e largura das folhas. Observou-se que as sementes são albuminosas, com endosperma oleaginoso e de consistência relativamente dura. O embrião é lateral, periférico e relativamente indiferenciado, de forma cônica. A germinação inicia-se com o desenvolvimento de uma massa de células indiferenciadas na depressão micropilar. Posteriormente, esta massa de células torna-se cilíndrica, com a diferenciação dos primórdios caulinar e radicular. O primórdio caulinar é constituído por três bainhas envolvendo a primeira folha. Estas se abrem sucessivamente, permitindo a emergência da folha primária. Entre os substratos testados, de acordo com os parâmetros avaliados, os mais adequados para crescimento inicial de mudas de Bactris gasipaes Kunth foram o TAE e o Plantmax.

Crescimento, produtividade e qualidade de raízes de rabanete cultivadas sob diferentes fontes e doses de adubos orgânicos

Avaliou-se o efeito da aplicação de doses de húmus de minhoca e de esterco bovino no crescimento de rabanete (Raphanus sativus L.), cultivar Crimson Giant, de agosto a setembro de 2002. Fez-se semeadura direta do rabanete com desbaste nove dias após, para adequar ao espaçamento de 0,20 x 0,08 m. Utilizou-se delineamento de blocos ao acaso, com sete tratamentos (15; 30 e 45 t ha-1 de húmus de minhoca e esterco bovino curtido, além do controle sem adição de fertilizante), em três repetições. Houve maior acúmulo de massa seca nas folhas em relação aos demais órgãos da planta, com acúmulo contínuo até os 13 dias após a semeadura, com posterior redução, quando ocorreu o desenvolvimento da raiz. As doses e fontes de adubos orgânicos aplicados pouco influenciaram no crescimento e nas produtividades total e comercial de raízes. O húmus de minhoca apresentou a menor porcentagem de raízes rachadas e isoporizadas nas doses de 9,2 e 20,4 t ha-1, respectivamente. A dose de esterco bovino, de 21,3 t ha-1 promoveu a maior porcentagem de raízes rachadas e a de 45 t ha-1 proporcionou redução em relação à de 15 t ha-1.

Aspectos morfológicos, germinação e desenvolvimento inicial de plântulas de Archontophoenix alexandrae (F. Mueller) H. Wendl. e Drude (Arecaceae) em diferentes substratos

Este trabalho teve por objetivo descrever a morfologia dos diásporos e as suas fases de germinação, bem como determinar o substrato mais adequado para a germinação das sementes e o crescimento das plântulas de palmeira-da-rainha (Archontophoenix alexandrae (F. Mueller) H. Wendl. e Drude). Periodicamente, unidades representativas de cada fase de germinação foram retiradas para as descrições morfológicas. Os substratos utilizados foram Plantmax®, areia, terra (latossolo roxo) e outro com proporções iguais de terra, areia e esterco (TAE). Foi instalado um experimento em delineamento inteiramente casualizado. Avaliaram-se a porcentagem, o tempo médio de germinação e o crescimento inicial das plântulas aos 135 dias após a emergência, com base na altura, diâmetro do colo e número, comprimento e largura das folhas. As sementes são albuminosas, com endosperma ruminado e oleaginoso, e o embrião é lateral, periférico e relativamente indiferenciado. A germinação é do tipo criptocotiledonar hipógea, iniciando-se com a formação de uma massa de células indiferenciadas na depressão micropilar. Essa massa de células torna-se cilíndrica, com a diferenciação dos primórdios caulinares e radiculares. Concomitantemente, ocorre o desenvolvimento de raízes adventícias no eixo embrionário. O substrato mais indicado para a germinação de sementes de palmeira-da-rainha é o Plantmax®, porém, para o crescimento inicial, indica-se Plantmax® e TAE.

Resposta de brócolis, couve-flor e repolho à adubação com boro em solo arenoso

Foram avaliados em condições de campo, em solo arenoso, com baixo teor de boro, os efeitos da adubação com cinco doses de boro (0; 2; 4; 6 e 8 kg ha-1 de B na forma de bórax) na produção de brócolis, couve-flor e repolho. O experimento obedeceu a um esquema fatorial com delineamento experimental de blocos ao acaso com três repetições. As adubações orgânica e química, inclusive o bórax, foram feitas no sulco antes do transplantio das mudas e a colheita foi feita entre 63 e 93 dias após o transplantio. A produtividade de brócolis variou de 16,9 a 20,5 t ha-1; a de couve-flor de 21,6 a 29,6 t ha-1 e a de repolho de 40,5 a 46,4 t ha-1. O aumento observado na produtividade de brócolis e de repolho foi linear e o efeito das doses de boro na produtividade de couve-flor foi quadrático, sendo necessários 5,1 kg ha-1 de B para atingir a produtividade máxima de 30 t ha-1. Brócolis e repolho mostraram-se menos sensíveis do que a couve-flor tanto à deficiência quanto ao excesso de boro. No caso da couve-flor, com a aplicação de 2 kg ha-1 ou de 6 kg ha-1 de B houve significativa perda de qualidade do produto.