Capacidade de suporte de carga e densidade do solo em áreas de plantio direto com e sem escarificação

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Caracterização biométrica e superação de dormência em sementes de Chloroleucon foliolosum (Benth.) G. P. Lewis

The objectives of this work were performing the biometric characterization of seed Chloroleucon foliosolum (Benth) G. P. (Lewis) from the municipality Ituaçu - BA, and analyze methods of scarification and temperature on germination. The seeds were characterized according to measurements of length, width and thickness, weight of thousand seeds, and water content. Were employed methods of scarification with sandpaper and sulfuric acid for 15 and 30 minutes, and not scarified seeds, combined with germination temperatures of 20, 25, 30 and 35 °C. Percentage and germination speed index, and percentage of primary root protrusion, abnormal seedlings, hard seeds and dead seeds were evaluated. The means of length, width and thickness was 6.03, 4.30 and 3.47 mm, respectively. The weight of a thousand seeds was 67.3 g with water content of 6.1%. Whereas the percentage germination with normal seedling, the method of scarification with sulfuric acid for 15 or 30 minutes combined to germination temperatures of 25 or 30 °C were effective in overcoming dormancy of Chloroleucon foliolosum.