Influence of the sample area in the variability of losses in the mechanical harvesting of soybeans

The mechanical harvesting is an important stage in the production process of soybeans and, in this process; the loss of a significant number of grains is common. Despite the existence of mechanisms to monitor these losses, it is still essential to use sampling methods to quantify them. Assuming that the size of the sample area affects the reliability and variability between samples in quantifying losses, this paper aimed to analyze the variability and feasibility of using different sizes of sample area (1, 2 and 3 m²) in quantifying losses in the mechanical harvesting of soybeans. Were sampled 36 sites and the cutting losses, losses by other mechanisms of the combine and total losses were evaluated, as well as the water content in seeds, straw distribution and crop productivity. Data were subjected to statistical analysis (descriptive statistics and analysis of variance) and Statistical Control Process (SCP). The coefficients of variation were similar for the three frames available. Combine losses showed stable behavior, whereas cutting losses and total losses showed unstable behavior. The frame size did not affect the quantification and variability of losses in the mechanical harvesting of soybeans, thus a frame of 1 m² can be used for determining losses.

Comparative Analysis of Approaches for Assessing Energy Intake Underreporting by Female Bariatric Surgery Candidates

Objective: To test six variations in the Goldberg equation for evaluating the underreporting of energy intake (EI) among obese women on the waiting list for bariatric surgery, considering variations in resting metabolic rate (RMR), physical activity, and food intake levels in group and individual approaches.Methods: One hundred obese women aged 20 to 45years (33.3 6.08) recruited from a bariatric surgery waiting list participated in the study. Underreporting assessment was based on the difference between reported energy intake, indirect calorimetry measurements and RMR (rEI:RMR), which is compatible with the predicted physical activity level (PAL). Six approaches were used for defining the cutoff points. The approaches took into account variances in the components of the rEI:RMR = PAL equation as a function of the assumed PAL, sample size (n), and measured or estimated RMR.Results: The underreporting percentage varied from 55% to 97%, depending on the approach used for generating the cutoff points. The ratio rEI:RMR and estimated PAL of the sample were significantly different (p = 0.001). Sixty-one percent of the women reported an EI lower than their RMR. The PAL variable significantly affected the cutoff point, leading to different proportions of underreporting. The RMR measured or estimated in the equation did not result in differences in the proportion of underreporting. The individual approach was less sensitive than the group approach.Conclusion: RMR did not interfere in underreporting estimates. However, PAL variations were responsible for significant differences in cutoff point. Thus, PAL should be considered when estimating underreporting, and even though the individual approach is less sensitive than the group approach, it may be a useful tool for clinical practice.

Use of sample size calculation in scientific research in Brazilian Physical Education journals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimisation of a sample preparation method for the determination of fumonisin B-1 in rice

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tower as magnetic antipinning core in a small superconducting sample

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of Internet and online interactions in a Brazilian sample

This work focused on the use of internet and online interactions and was based on data collected from a sample of Brazilian college students (64 people) who were asked to answer the Face-to-Face and Online Interaction Survey. The outcomes are analyzed in this paper and from them it is possible to observe patterns on internet interaction. It was also possible to conclude that the sample frequently uses the Internet, its online interactions and that this kind of interaction is used as a complement to face-to-face communication.

Biological Hydrogen production from environmental sample in tropical countries

The hydrogen gas is regarded as clean and renewable energy source, since it generates only water during combustion when used as fuel. It shows 2.75 times more energy content than any hydrocarbon and it can be converted into electrical, mechanical energy or heat. Inoculum sources have been successfully tested for hydrogen biological production in temperate climate countries as sludge treatment plants sewage, sludge treatment plant wastewater, landfill sample, among others. However, hydrogen biologic production with inoculum from environmental samples such as sediment reservoirs, especially in tropical countries like Brazil, is rarely investigated. Reservoirs and fresh water lake sediment may contain conditions for the survival of a wide variety of microorganisms which use different carbon sources mainly glucose and xylose, in the fermentation. Glucose is an easily biodegradable, present in most of the industrial effluents and can be obtained abundantly from agricultural wastes. A wide variety of wastewater resulting from agriculture, industry and pulp and paper processed from wood may contain xylose in its constitution. Such effluent contains glucose and xylose concentrations of about 2 g/L. In this sense, this work verified hydrogen biological production in anaerobic batch reactor (1L), at 37 ° C, initial pH 5.5, headspace with N2 (100%), Del Nery medium, vitamins and peptone (1 g/L), fed separately with glucose (2g/L) and xylose (2 g/L). The inoculum was taken from environmental sample (sediment reservoir Itupararanga - Ibiúna - SP-Brazil). It was previously purified in serial dilutions at H2 generation (10-5, 10-7, 10-10), and heat treated (90º C - 10 min) later to inhibited the H2 consumers. The maximum H2 generations obtained in both tests were observed at 552 h, as described below. At the reactors fed with glucose and xylose were observed, respectively, 9.1 and 8.6 mmol H2/L, biomass growth (0.2 and 0.2 nm); consumption of sugar concentrations 53.6% (1.1 glucose g/L) and 90.5% (1.8 xylose g/L); acetic acid generation (124.7 mg/L and 82.7 mg/L), butyric acid (134.0 mg/L and 230.4 mg/L) and there wasn’t methane generation in the reactors. Microscopic analysis of biomass in anaerobic reactors showed the predominance of Gram positive rods and rods with endospores, whose morphology is characteristic of H2-generating bacteria, in both tests. These species were selected from the natural environment. In DGGE analysis performed difference were observed between populations from inoculum and in tests. This analysis confirmed that some species of bacteria were selected which remained under the conditions imposed on the experiment. The efficiency of the pre-treatment of inoculum and the imposition of pH 5.5 inhibited methane-producing microorganisms and the consumers of H2. Therefore, the experimental conditions imposed allowed the attainment of bacterial consortium of producer H2 taken from an environmental sample with concentration of xylose and glucose similar to the ones of the industrial effluents.

Obsessive-compulsive symptom dimensions in a population-based, cross-sectional sample of school-aged children

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative clinical sample preparation of DNA and RNA viral nucleic acids for a commercial deep sequencing system (Illumina MiSeq (R))

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bacterial diversity from environmental sample applied to bio-hydrogen production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the Computer-based Battery for Oral Language (BILOv3) through the Rasch model for a Brazilian Sample

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)