Proposta de adequação à construção sustentável: tecnologias e alternativas para instituições de ensino

Due to the huge impact negative on the environmental caused by the civil construction, the university plays a majorital role in the proposal of studies and projects that aim the sustainable building. Nowadays, it has been noted the great demand for projects which contain a systemic focus in the tripod of the sustainable development, that is to say, more and more the consumers are demanding that the final result of a project contemplate the social, economic and environmental areas. According to the National Industry Confederation (CNI) and the Brazilian Chamber of the Industry and the Construction (CBIS), the goal for 2020 is that the constructions have an environmental performance 20% higher in comparison to the actual one, starting with an index defined by many indicators, such as: water consumption, energy, residues generation and social-environmental performance of the bought products. In this case, the theme of the project comes around the adequation of scholar institutions to the sustainable construction through simple changes of tecnologies and habits aiming the growth of the environmental eficiency of the enterprise and, consequently, the improve of sustainable practices inside the institution. Once the change is proposed, it will be furnished datas liable of reproduction for the adequation of others scholar institutions, according to it's necessity or interest. After the realization of the studies, it was possible to notice that the environmental performance of a scholar institution can be improved through the implantation of tecnologies of fast return in the investment, such as: flow reducers, rain water reuse system, green roof, retrofit of lamps and execution of a photovoltaic system. Besides the fast return of investment, the monthly economy of the applied tecnologies combined can reach 75% when compared to the actual spending with water and electric energy

Estimativa da correção do coeficiente de retorno de esgoto sanitário em habitações com sistemas de aproveitamento de água pluvial: estudo de caso da cidade de Bauru (SP)

Pós-graduação em Engenharia Civil e Ambiental - FEB

Características químico-mineralógicas e cerâmicas da matéria-prima utilizada pelo polo cerâmico de Rio Verde de Mato Grosso, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de programa computacional no dimensionamento de volume de reservatório para sistema de aproveitamento de água pluvial da cidade de Ponta Grossa, PR

The main aim of this paper was to use the REZZ software to calculate the tank volume rainwater harvesting system. For this purpose, rain data of Ponta Grossa-PR-Brazil were used considering different statistical treatment (average, 75%, 85%, 95% and 99% of confidence) and different roof areas (50, 80, 120 and 200 m2). The harvesting system was considered only for toilet flush in households with 3, 4 and 5 inhabitants. There were applied the following methods/concepts: Flow equalization (Rippl); Brazilian method as well the English and German practical methods. Further, the mass-balance was simulated for some conditions. All considered methods are described in NBR15527/07, the Brazilian standard for rainwater harvesting. As expected, the results pointed out for huge differences depending on the choice method and the statistical treatment of the rain data. The REZZ appliance showed to be useful thus permitting to set different conditions and to obtain rapid results in order to assist designers to adopt the best cistern volume for each particular case.

Avaliação do amido natural como alternativa simples para tratamento de águas pluviais para fins de aproveitamento não potável

This work aims to evaluate a simple procedure for rainwater treatment by applying natural corn starch as primary coagulant for non-potable harvesting households. For this purpose, coagulation, flocculation and filtration were carried out in lab essays in samples of roof and floor catchment without first-flush. There were investigated corn starch dosages from 1 to 12 mg/L in pH values around 6,0. The apparent color and turbidity were measured and the results were statistically presented. Results pointed out reductions around 70 and 80% for apparent color and turbidity (residuals of 53Hu and 13Tu), respectively.

Avaliação do efeito da inclinação e umidade antecedente na qualidade e quantidade das parcelas escoadas, percoladas e armazenadas em telhado verde extensivo

This study investigated the effect of slope and antecedent soil moisture on the water depth stored and percolated on extensive green roofs built in pilot scale. For this purpose, slopes of 10, 20 and 30% were investigated. Moisture was measured before and after each test in order to determine the differential moisture (∆U). The experimental runoff and percolated flow were analyzed by varying moisture and slope. Apparent color and turbidity were measured on runoff and percolated flow for each one of the modules. The results yielded that for the slopes of 10% the smaller values of runoff was obtained (average of 1,01% ± 0,7%). For the others slopes (20% and 30%), the runoffs were around 35% ± 15%. The sum of runoff and percolated water results in 77% (average) for slope of 10% and 80% for 20% and 30%. The slope and moisture have explained 87% of data for retained water and 81% for runoff. For percolated flow the inverse trend was observed. The retained water was 11,6±1,4mm for the module with 10% of slope, around 10,0±1,2 mm for the module with 20% of slope, and about 9,5±1,1 mm for the module with 30%. The results pointed out that both slope and antecedent moisture are crucial for runoff reduction and for material transportation.

Influence of storage period of pieces in stiffness of pinus elliottii Glulam Beams

This study aimed to investigate the influence of storage time (0, 48 hours) of Pinus elliottii pieces and the tests to obtaining modulus of elasticity (static bending and transversal vibration) in glued laminated timber beams, produced with resorcinol based adhesive and 0.8 MPa compaction pressure. After pieces were properly prepared, part of them was used in immediate three manufacturing glulam beams, tested after adhesive cure, and part stored for 48 hours under a roof with a temperature of 25°C and relative humidity of 60% for subsequent manufacturing and testing three other glulam beams. Results of analysis of variance (ANOVA) revealed that the storage period was significant influence in modulus of elasticity obtained in static bending test (8% reduction from 0 to 48 hours). This not occurred with modulus of elasticity obtained by transversal vibration test (no significant influence). ANOVA results showed equivalence of means in both test procedures. New researches ire needed to better understand the investigated phenomenon, using new wood species, other storage conditions and a great number of samples.

Aplicação de técnicas de processamento e análise de imagens para detecção de edificações e vegetação a partir de dados LiDAR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da qualidade térmica de espaços de transição do tipo linear externo

Pós-graduação em Arquitetura e Urbanismo - FAAC

Condições de luminosidade e substratos no desenvolvimento de grama bermuda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Projeto de um tanque de armazenamento atmosférico com teto flutuante para estocagem de gasolina

In this paper are discussed the main project stages of an atmospheric storage tank with floating roof. It emphasizes the calculations of the bottom, the shell and the floating roof, discussing its stages and conditions, based on the technical standards of the project. The storage tanks are static equipment working under low pressure and has an essential importance for the operation of a process plant. This paper has the purpose of obtaining the dimensions and materials of each component of the tank through the calculations and prove them with results obtained by numerical simulation by finite elements with the help of Autodesk Inventor software, consolidating the project

Aplicação de ferramentas BIM em um projeto de cobertura do estádio Professor Dário Rodrigues Leite

In all segments, the companies are looking for the highest productivity with the lowest possible cost, and in the construction industry, the thinking is the same. Over time, techniques that generate more productivity supplanted previous techniques; an example is the CAD technology that replaced free drawings in projects execution. However, the Computer Aided Design (CAD) technology does not deal with certain factors that permeate the entire project. It is required the use of other techniques to supply this need in traditional projects. For example, a software for schedule management, another for assets management and a person who makes calculations for estimates and budgets. The BIM (Building Information Modeling) technology aims to integrate all this information, facilitating the communication among members of a work team and reducing the time required to carry out the project. This work is a applied research, a descriptive research, carried out through modeling and simulation, processes inherent in the use of BIM, a survey was also used only to contextualization. BIM was used for a soccer stadium roof project, in order to verify the feasibility of such use through the analysis of: BIM tools, difficulties encountered and implications of BIM use, and comparison of traditional methods and the use of BIM. To aid the contextualization, a survey was conducted to verify the use of BIM in medium and small companies