Sistema hipermídia ajudando a construir a pesquisa escolar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do desempenho das propriedades mecânicas de concretos self compacting elaborados com diferentes tipos de cimentos submetidos à cura térmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A análise de assunto no processo de indexação: um percurso entre teoria e norma

Considered the step that constitutes the intellectual work of the indexer, the approach runs the focus of the initial phase of the indexing process - the subject analysis. Among the various denominations that can be achieved, the subject analysis reaches its dimension applied when observed the rules that underlie the indexing process. The release of the documentary information requires the development of contributions to aid in the procedures of analysis, synthesis and representation of the contents documentary, seeking contributions to both the theoretical sedimentation, and for fostering the professional practice of the librarian. Through bibliographic exploratory research, this article aims to contribute to the relevance of subject analysis, concluding that there is a gap in the use of NBR 12676/1992, as well as the need for its updating.

Caracterização dos finos de areia de uma fundição e sua incorporação em argamassa de cimento

Pós-graduação em Engenharia Civil e Ambiental - FEB

Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise do ruído e intervenção fonoaudiológica em ambiente escolar: rede privada e pública de ensino regular

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise das resistências de embutimento e de compressão para madeiras de pinus e eucalipto

The connections in the wood structures are the places with high concentrations of stresses and therefore are more fragile than the rest of the structure. The connections between pieces of wood can be made by metal pins (nails or screws). The compression and embedment strength has significant influence on the calculation of the connections. The main aim of this work was to evaluate the compression and embedment strength in the directions parallel, inclined at 45° and normal to the grain, using standard specimens according to ABNT NBR 7190/1997 standard. The compression and embedment strength were initially evaluated according to ABNT NBR 7190/1997, which admits the deformation of 2‰ as limit of embedment and the ratio between the ultimate strength and the area of application of load in the specimen for the compressive strength. Afterward, the embedment strength was evaluated by the EUROCEDE 5 /1995 European standard, which use the limit of 5 mm of the displacement for the embedment. Specimens of Pinus oocarpa, Cumaru and Pinus taeda were used in tests to calibration of equipment and specimens of Pinus taeda and Eucalipto citriodora were used to compare the results of strength. The results of strength were evaluated based on statistical analysis. The results of compressive strength for the Pinus taeda showed no significant differences in embedment strength in the directions parallel and normal to the grain. For the Eucalipto citriodora only in the direction parallel to grain the compression strength was not significant compared with the embedment strength. For both species, only the parallel compression strength and inclined at 45o to the grain, which were to the grain, which were admitted the strain of 2‰ were not significantly different compared with the compression strength determined according to ABNT NBR 7190/1997. The normal compression strength obtained according to ABNT NBR 7190/1997 and ultimate compression strength not ...

Sistema de gestão ambiental: subsídios para a implantação em uma estação de tratamento de esgoto a partir da análise crítica de estudos ambientais prévios

The process of environmental impact assessment (EIA), in the extent of previous environmental studies, has as one of its functions to provide subsidies to the actions of environmental managment of enterprises. However, the proper estructuring of programs that allows to support this managment does not often occurs. This research sought as one of its objectives to evaluate in which extent the process of EIA can be a subsidie for the EMS, providing basic elements of this system. In addition, more specifically, the research had as one of its objetives the development of subsidies for the implantation of an Environmental Managment System (EMS), based on the model of ISO 14001 (2004), for a sewage treatment plant yet to be constructed in the city of President Venceslau / SP. In order to achieve theses objetives, a discussion was held based on the evaluation of environmental studies available in the library of Cetesb / SMA. Still, for the elaboration of subsidies for the EMS of the treatment plant, the research was focused on the structuring of environmental management program, based on the information contained in its Preliminary Environmental Report (PER). The research had as one of its products, the development of subsidies for the planning and control of the environmental aspects and impacts and for the environmental program of the enterprise, based on the use of environmental indicators. It was concluded, based on the results that, in general, the previous environmental studies analyzed showed little emphasis on the phase of development of structured environmental programs that offer guidelines to achieve the desired results for the environmental performance of the company.

Painel particulado composto por casca de eucalipto na camada intermediária

This work was developed to evalute the physical and mechanical properties of a panel of three particle layers from the test specification of NBR 14810-3 (2006), using wood of Eucalyptus sp. and Eucalyptus saligna and Eucalyptus urograndis bark. The mechanical properties were evaluated to obtain the bending modulus of rupture (MOR) and modulus of elasticity (MOE) and Internal bond. The physical properties were obtained thickness sweeling, water absorption, moisture content and board density. Were evaluated four different compositions of panels containing 5, 10, 15 and 20% in the inner layer of bark. The results were compared with the Brazilian standard NBR 14810-2 (2006) and also with studies in the literature. The panels produced were adequate to all the optimal values suggested by the standard only in the composition with 5% skin in the inner layer. The other treatments showed satisfactory results in all tests except for moisture content

Caracterização físico-mecânica de painel de MDP produzido com madeira de Eucalipto e Bracatinga

This work is the production of particleboard of particles reconstituted from MDP (Medium Density Particleboard) adding particles in the inner layer of Mimosa Scarelli, popularly known as bracatinga, the ratios of 0%, 25%, 50%, 75% and 100%. The panel produced is composed of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending strength, shear strength and residual moisture, and testing of particle size not existing in the standard cited. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests were close to the normative specifications indicating positively the production of MDP with wood decay.

Proposta de implementação da ISO 14001 em uma empresa química

Due to environmental concerns and the current legal requirements, companies are looking for ways to reconcile economic growth with environmental preservation. The purpose of this project is to show the stages of implementation of ISO 14001 in a chemical company and propose changes in chemical procedures creating goals to be achieved. In this paper, the study for the implementation of ISO 14001 is in Viapol ltda., where the lack of environmental management can cause enormous impact to the environment and may generate air, soil and water pollution. The project resulted in a mapping of all the processes and a broad survey of waste and emissions, generating proposals to change some of the processes and and creating programs to achieve the goals and objectives proposed in the Environmental Policy. Adopting an environmental management system (EMS), the company will reduce costs by decreasing the amount of raw material used, shooting down on waste disposal and the amount of it, and increasing productivity. By committing to the implementation of the EMS, companies will be demonstrating a proactive approach to environmental issues and enrich its image to consumers’ point of view

Proposta metodológica para a correção do coeficiente de retorno de esgoto sanitário em unidades com sistemas de aproveitamento de água pluvial

The use of rainwater for non-potable purposes generates a reduction in the consumption of treated water, however, this reduction is not observed in the generation of wastewater, as this is independent of the water source. In Brazil, the pricing on the services of collection and treatment of sewage, in general, is based on the coefficient of return of the sewage disposal system, which has a relation sewer / water proportional to the consumption of treated water measured at the consumer unit. The use of rainwater originating from utilization systems infer on the coefficient, underestimating the volume of wastewater generated. Therefore, this study presents a methodology for setting the coefficient of return. Different roof areas, reservoir volumes and rates of water consumption situations were simulated. The behavior of adjustment of the coefficient of return were also analyzed for the average area per capita roof (m² / inhabitant) of Rio Claro - SP. As a result, it can be seen that the adjustment of the coefficient of return is directly proportional to the increase of the roof areas and the volumes of reservoirs, and inversely proportional to the total water demand. The corrected coefficient of return showed the minimum value of 0.83 and a maximum value of 1.45, this variation corresponds to the maximum ratio between the demands of total water and rainwater, since the exploitation of rain water should be used only for non-potable uses, according to NBR 15527 / 07. To the municipality of Rio Claro - SP was noted an adjustment of the coefficient of return ranging from 0.99 to 6.61

Diagnóstico e proposição de subsídios para a elaboração de plano de gestão ambiental: estudo de caso de um abatedouro avícola

In view of the current environmental concerns and legal requirements, this work aims to achieve a diagnosis and offer subsidies for development of an environmental management plan in an industry. The industry considered to be a subject of study of this research is the aviculture, considered its great importance in Brazil and to present a significant environmental impact. The unit of analysis is a chicken slaughterhouse, located in Rio Claro, SP. The developed methodology for identification and analysis of environmental significative aspects were based in the concepts of environmental impact and in the ABNT NBR ISO 14.001:2004. From the analysis of selected aspects, this research proposed several environmental indicators for the company and identified points of environmental improvement. The results of this study provide methods for identifying its environmental aspects and development of its environmental management plan to chicken slaughterhouse and also to other companies.

Análise da influência do torque de montagem na resistência de parafusos de fixação

Whereas the assembly torque calculation has great importance on efficiency and life of bolts, the objective of this study was to analyze the combined stresses during assembly, the friction coefficient, compare the rupture torque results with the indicated torques by standards and to present a new torque method without the stress combination (shear stress and normal stresses). For this study were carried eighteen tests with different diameters and materials, this bolts were undergoing five ranges torque until the breaking torque. With the experimental rupture torque values for each test and with the bolt quality certificate was possible to calculate the friction coefficient so compared with the theory. Another comparison was the experimental rupture torque with assembly torque indicated by NBR-8800 and ASME-PCC. The main conclusion are related to combined stress, because for this factor can fail at the assembly time, so for in some cases must use the tensioning method, because in this method won't be present torsional stresses

Proposta de sistemática operacional para implantação de sistemas de gestão ambiental em empreendimentos industriais

The implantation of environmental management systens (SGA) in companies is the first step to the company conquers the environmental certification and consequently the benefits of a sustainable production of products, services and activities can bring. However, in the way as they are proposals in bibliographies the implantation of the SGAs, does not identify the definition of the operational stages of implementation of the same ones, generating doubts on the real environmental and administrative performance that they can come to generate for the organization. In this direction, the present research brings a proposal of operational systematics for implantation of SGA in companies, detailing each stage of implantation, considering its particularitities. For in such a way, a revision of norm NBR ISO 14001:2004 was made, looking for to identify to the interpretation imperfections gifts in the normative system. Moreover, other methods of SGA implantation had been searched gifts in the bibliography, searching proposals that detailed the operational aspects of the implantation of the system. In the same way, the accomplishment of a period of training supervised in the first semester of 2007 made possible the practical experience of the functioning of a system of environmental management, beyond the contact with professionals of the area and the acquisition of documents that had helped in the development of the research. The result was the attainment of a detailed procedure more, defining the operational systematic of SGA implantation, beyond the generation of a flowchart, describing as to develop each stage. This detailing certainly will facilitate the implantation of a SGA in companies interested in improving its environmental performance.