127 resultados para Meios de obtenção de provas
Resumo:
Due to great difficulty of penetration of drugs through skin, different organized systems, such as liposomes, have been studied in order to increase percutaneous penetration. The aims of this work were to obtain and characterize small unilamellar liposomes containing caffeine (CAF). Liposomes composed by soy phosphatidylcholine - PS (40 mM) or hydrogenated PS - PSH (40 mM), with and without cholesterol - CHO (6 mM) and CAF (30 mg/mL), were characterized by size distribution, determination of mean diameter and encapsulation efficiency. Uniform size distribution with low polidispersity was observed. The mean of diameters obtained were: PS/CHO (64 nm), PS (80 nm), PSH/CHO (85 nm), PS/CAF (145 nm), PS/CHO/CAF (147 nm), PSH/CHO/CAF (152 nm), PSH (166 nm) and PSH/CAF (481 nm). The obtained encapsulation efficiency was 10.84% for PSH/CHO/CAF, followed by PS/CHO (6.61%), PSH/CAF (3.07%) and PS/CAF (1.57%).
Resumo:
Electrical energy from photovoltaic panels (PV) has became an increasing viable alternative because of the great concern for environmental preservation and the possibility of the reduction of the conventional fuels, and this natural energy source is free, abundant and clean. In addition, Brazil is a privileged country because of the high levels of irradiation throughout its territory all over the year. Thus the exploitation of the energy from PV is one of the best alternatives to overcome the supply electrical energy issues. However, nowadays the energy conversion efficiency is low and the initial costs are high for these energy systems. Therefore, in order to increase the efficiency of these systems the extraction of the maximum power point (MPP) from PV is extremely necessary, and it is done using the maximum power point tracking (MPPT) techniques. The MPP of the PV varies non linearly with the environmental conditions and several MPPT techniques are available in literature, and this paper presents a careful comparison among the most usual techniques, doing meaningful comparisons with respect to the amount of energy extracted, PV voltage ripple, dynamic response and use of sensors, considering that the models are implemented via MatLab/Simulink®. © 2010 IEEE.
Resumo:
Objective: This case-control study analyzed mass spectrometry fingerprinting patterns of culture media samples used for embryo culture to predict embryo implantation. Methods: The culture medium harvested after embryo transfer of 22 embryos from 13 patients was used for the experiments. After embryo transfer, the remaining culture media were collected and samples were split in positive (n=8) and negative (n=14) implantation groups according to implantation outcomes (100% or 0% of implantation). Samples were individually diluted and injected directly to the Electrospray ionization (ESI) MS coupled to a Quadrupole Time-of-flight MS (Q-ToF-MS).Ions relative intensities of each spectrum were considered. Data analysis was conducted in MatLab 7.0 version using Partial Least Squares - Discriminant Analysis toolbox. Results: There were 3027 observed ions at 100% and 0% implantation groups by ESI-Q-ToF-MS. The statistical model could categorize the samples in two clusters, based on their positive and negative implantation outcomes. Less intense ions present in the mass spectra with statistical significance have contributed to the major differences to group distinction. Conclusions: Positive and negative implantation embryos showed a specific biochemical pattern present in culture media, which could be detected as a fast, simple and non-invasive way. This biochemical profile could help the selection of the most viable embryo, improving single embryo transfer and thus eliminating the risk and undesirable outcomes of multiple pregnancies. © Todos os direitos reservados a SBRA - Sociedade Brasileira de Reprodução Assistida.
Resumo:
A laboratory culture of Ankistrodesmus gracilis algae was evaluated by studying the biology of the species and its chemical composition in a traditional medium (CHU 12) and in two alternative culture media, NPK (20-5-20) and macrophyte (Eichhornia crassipes) + NPK, in three different types of recipients (fiberglass, carboy and plastic bag). First peak in the growth curve of Ankistrodesmus gracilis occurred on the ninth day in macrophyte + NPK medium (74.16 x 10 5 cells mL -1) in a fiberglass recipient. However, highest density (p < 0.01) was reported in medium CHU 12 (122.87 x 10 5 cells mL -1) in a plastic bag on the twelfth day. Cell density was over 70 x 10 5 cells mL -1 starting on the twelfth day. Growth rate of A. gracilis was similar (p > 0.05) in culture media in the three recipients. Protein and fiber were similar (p > 0.05) in the treatments, but lipids were higher (p < 0.05) in NPK. Nitrate, ammonia, total phosphorus and orthophosphate contents were over 1 mg L -1 in NPK (p < 0.01). Results show that alternative media, such as NPK and macrophyte + NPK, are possible for large-scale culture of A. gracilis cultured in three types of recipients. Costs are low, occupying less space when cultured in plastic bags and in the laboratory.
Resumo:
Four castrated horses were utilized in randomized blocks experimental design. The objective was to study the in vitro acquirement of indigestible fiber, neutral detergent fiber (NDFi) and acid detergent fiber (ADFi), using as inoculum source rumen fluid (RF) or horse feces (HF), to estimate the nutrient digestibility (ND) in horses. Treatments consisted of direct method by total feces collection (TC) and indirect method either by the use of NDFi or ADF by the use of LR or HF as inocula source. The first essay was done with horses fed coast-cross hay exclusively, while for the essay two, the horses were fed of 70% of coast-cross hay and 30% corn grain. For the essay 1, ADFi-HF presented the best marker recuperation rate (RR) (103.67%), being similar to control (TC), while NDFi-RF and ADFi-RF resulted in lower RR (P<0.05), 83.43 and 88.28%, respectively. The ND was adequately estimated by NDFi-HF and ADFi-HF. On the second essay there were no significant effects of the marker type, as well as for the indigestible marker acquirement method, for the marker RR (average value of 101%). The ND was adequately predicted by the ADFi obtained for both innocula source and NDFi obtained by the use of HF as inoculum, for horses fed a mixed diet. It can be concluded that horse feces may be used as inoculum source for the acquirement of NDFi and ADFi in vitro for digestibility determination on horses fed coastcross hay exclusively, as well as for horses fed a mixed diet.
Resumo:
The use of culture media produced with commercial fertilizers can represent a simple and low cost alternative for commercial orchid propagation. The aim of this study was to evaluate the in vitro growth of plantlets of Cattleya trianaei in culture medium MS reduced and and formulated with Peters® NPK 10-30-20 in different doses. 90 day-old plantlets with two leaflets were submitted to five treatments (T1 - reduced MS; T2 - Peters® 1 g L -1; T3 - Peters® 2 g L-1; T4 - Peters® 3 g L -1 and T5 - Peters® 5 g L-1) arranged in a completely randomized design with five replicates with 25 plantlets for each treatment and incubated during 180 days, with subcultures at each 60 days, when the number of roots, root length, number of leaves, shoot length and shoot fresh matter were evaluated. The simplified culture medium with fertilizer Peters® 3 g L -1 presented results statistically different as for the number of roots, number of leaves, shoot length and shoot fresh matter and it can be recommended for in vitro growth of this ornamental orchid.
Resumo:
This paper aims to highlight the state of the art of obtaining carbon credits through the use of electric vehicles. This is one of the solutions to significantly reduce the emission of GHG (Greenhouse Gas) emissions in the case of CO 2, NOx, SOx, and CH 4 (thermochemical reactions arising from the combustion of gasoline with ethanol) in motor vehicles. For this quantitative study was done based on the survey of bibliographic data available and the development of basic calculations considering the car fleet of the Country of Brazil and the CO 2 emissions generated by the same. Thus explaining the considerable gain in air quality and reduction of vectors of greenhouse gases in the case of replacing the current fleet of vehicles combustion of hydrocarbon aliphatic chain, for an eco-efficient fleet consists of electric vehicles and/or hybrids.
Resumo:
The bacteria Bacillus thuringiensis var. israelensis (Bti) generates certain toxins with pesticide action, which can be used on the control of transmissible diseases by culicides, specially Aedes aegypti, the dengue vector. This biopesticide has been produced by submerged fermentation and, in Brazil, this production has been made by very little research centers and, more recently, by a unique small enterprise. For the implementation of a viable vectors control program through biopesticides, some studies about culture media are essential in order to join efficiency and low costs. In this way, agroindustrial wastes or by-products have been used as a nutrient source for the culture media production. In this study, corn steep liquor, a corn industrial processing by-product and tryptose, both with/without sugar addition, were compared as culture media. Cellular growth was evaluated by optical density at 620 nm, spore production by total viable cell count and LC50 by bioassays against 4th instar larvae. Among the four examined substrates, the medium composed by glucose plus corn steep liquor presented the best spore production and bioassay results.
Resumo:
In this work, surface modification of the Ti-6Al-4V alloy by irradiation with a Nd:YAG laser beam was studied. The matrix spacing was varied and the other parameters were kept constant. After theirradiation, the samples were immersed into SBF solution (Simulated Body Fluid) for 7 days at 37 ° C for nucleation and formation of calcium phosphates. After this period, the samples were subjected to a heat treatment at 600 °C. X-ray diffraction results indicated the formation of a mixture of phases containing hydroxyapatite and tricalcium phosphate. Infrared analysis demonstrated the presence of bands related to hydroxyapatite. SEM micrographs showed that different matrix spacing used leads to the formation of different morphologies.The 0.01 cm spacing induced the formation of microspheres, characteristic of the hydroxyapatite phase, while for 0.02 cm spacing, only a non-homogeneous coating was obtained. Therefore, the use of laser in the production of active surfaces for deposition of bioceramics proved to be viable, and the final coating has potential for applications in the field of dental implants.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Química - IQ
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)