Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

Subsídios para implantação de trincheiras de infiltração na área urbana de Rio Claro/SP

The purpose of this work is to study the theme “infiltration trenches” in some of its main aspects, such as sizing methods and parameters related to this, in order to subsidize the installation of these structures in the urban area of Rio Claro/SP. For purposes of sizing, the “rain-envelope method” was used for its simplicity and direct application from the local characterization data and the IDF (intensity-duration-frequency) curve data. The method bases on the determination of the tributary volume of input and output device. The curve of values accumulated over time of the volumes tributaries to the device, which is built on the flow rates obtained from the local IDF curve, is compared with the value curve of his effluent volumes determined from the flow characteristics obtained from the infiltration soil. The maximum difference between the curves is the volume sizing. Five locations were chosen in the urban area of Rio Claro for implementation of these devices, considering the soil type, hydraulic conductivity of each area and lot size according to the Master Plan of Rio Claro. This work also presented an estimated reduction of the runoff in urban lots by using infiltration trenches.

Influência do diâmetro foraminal do canal radicular, do tipo e da penetração de agulha, e do fluxo da solução irrigadora na limpeza e na extrusão apical

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelo distribuído aplicado à análise de evaporadores do tipo tubo aletado

Pós-graduação em Engenharia Mecânica - FEIS

The long-term administration of calcineurin inhibitors decreases antioxidant enzyme activity in the rat parotid and submandibular salivary glands

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da suscetibilidade a corridas de massa aplicada a dutovias: estudo de caso na bacia do Ribeirão do Roque

This scientific research aimed at to analyse the susceptibility to debris flow of the watershed of Ribeirão do Roque (SP), focusing on the upstream areas of OSBRA pipeline. This is because, mass flow can cause damage to pipes, mainly due to conditioning hydro erosion of the land in the drainage crossings, including the undermining the banks of streams. Firstly, It was conducted a literature review, aiming to identify and understand the principal characteristics and conditions of debris flow. Secondly, the physical and anthropic factors and their respective weights of influence were selected and used to determine the mass flow susceptibility. It was selected the following physical factors: type and thickness of rocks, soil and unconsolidated materials; textural density; amplitude relief; relief slope; shaped valley; and shape of slopes. Such factors are present in the physiographic subdivision map of the study area. In addition, the anthropic attributes correspond to the classes contained in the land use map. Therefore, the physical and anthropic factors were integrated through the multi-criteria analysis in a GIS environment, generating a total susceptibility map of debris flow on the scale 1:50,000. The results showed that a significative part of the study area was classified as average susceptibility. However, it was identified areas with high susceptibility in the region in which the pipe cross the Ribeirão do Roque. Moreover, at which point the river presents a closed valley and a meander shape, without a fluvial plain that would be useful to attenuate the development of the process. Consequently, if a mass flow begins in any of these most susceptible regions located upstream of the pipe, the chances that the process develops by the river and causes the excavations of his bed are quite large. However, the pipelines cross these critical areas directly on the rock (diabase), which provides additional protection against possible ...

Estanho em amostras ambientais por espectrometria de fluorescência atômica (AFS)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de poliacrilamida na redução da perda de carga em tubulação de polietileno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Perda de carga em reduções concêntricas de PVC

In the pumping pipelines the located load losses are very important since they have direct influence on hydraulic design of an irrigation system, especially regarding the concentric reducers used in the distribution lines. Hence this work was conducted in the Laboratório de Hidráulica do Centro Federal de Educação Tecnológica de Uberaba. We analyzed 03 concentric reducers PVC 75 x 50 mm, 50 mm and 35 x 35 x 1 "operating at different flow rates. The performance of the tests with the variation of flow in every situation possible to obtain equations to estimate the loss. The equation models presented a high setting, thus enabling the determination of the localized head loss in a situation closer to field reality. For the reduction of 75 x 50 x 35 mm and 50 mm at a flow rate 16.97 m³ h-1 the pressure drop reduction was obtained respectively 0.9263 and 2.7408 mca. To the reduction of 35 x 1 "at a flow rate of 6.02 m³ h-1 was obtained 2.9304 mca pressure drop reduction. The located losses produced by these reductions are relatively high and should be considered with great discretion in hydraulic design of the irrigation system.

Desenvolvimento de uma câmara para combustão de combustíveis líquidos, operando sob regime de combustão sem chama visível

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Arcabouço hidroestratigráfico e evolução temporal dos níveis d´água no sistema aquífero guarani na cidade de Araraquara-SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Metabolic fingerprinting using direct flow injection electrospray ionization tandem mass spectrometry for the characterization of proanthocyanidins from the barks of Hancornia speciosa

Direct flow injection electrospray ionization ion trap tandem mass spectrometry (ESI-IT-MS/MS) was used to investigate the polyphenolic compounds present in an infusion from the barks of Hancornia speciosa Gom. (Apocynaceae), a native Brazilian plant popularly known as 'mangabeira', used as a source of nutrition and against gastric disorders. After a simple sample filtration pretreatment the characteristic fingerprint of the infusion was performed in negative ion ESI mode in a few minutes. At low capillary-voltage activation, the deprotonated molecules ([M-H](-)) were observed and using collision-induced dissociation the product ion spectra showed the presence of a homologous series of B-type proanthocyanidins, as well as another series containing their respective C-glycosylated derivatives, with a degree of polymerization from 1 up to 6 units of interlinked catechins. Therefore, direct flow injection allowed us to identify the key compounds without preparative isolation of the components. Copyright (C) 2007 John Wiley & Sons, Ltd.

Characterization of gallotannins from Astronium species by flow injection analysis-electrospray ionization-ion trap-tandem mass spectrometry and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of proanthocyanidins from Parkia biglobosa (Jacq.) G. Don. (Fabaceae) by flow injection analysis - Electrospray ionization ion trap tandem mass spectrometry and liquid chromatography/electrospray ionization mass spectrometry

The present study investigates the chemical composition of the African plant Parkia biglobosa (Fabaceae) roots and barks by Liquid Chromatography - Electrospray Ionization and Direct Injection Tandem Mass Spectrometry analysis. Mass spectral data indicated that B-type oligomers are present, namely procyanidins and prodelphinidins, with their gallate and glucuronide derivatives, some of them in different isomeric forms. The analysis evidenced the presence of up to 40 proanthocyanidins, some of which are reported for the first time. In this study, the antiradical activity of extracts of roots and barks from Parkia biglobosa was evaluated using DPPH method and they showed satisfactory activities.

Comparison of Nonmesonic Hypernuclear Decay Rates Computed in Laboratory and Center-of-Mass Coordinates

In this work we compute the one-nucleon-induced nonmesonic hypernuclear decay rates of He-5(Lambda), C-12(Lambda) and C-13(Lambda) using a formalism based on the independent particle shell model in terms of laboratory coordinates. To ascertain the correctness and precision of the method, these results are compared with those obtained using a formalism in terms of center-of-mass coordinates, which has been previously reported in the literature. The formalism in terms of laboratory coordinates will be useful in the shell-model approach to two-nucleon-induced transitions.