The influence of dietary vitamin C and E supplementation on the physiological response of pirarucu, Arapaima gigas, in net culture

This study evaluated the efficacy of dietary vitamin C (ascorbic acid or AA), vitamin E (α-tocopherol or α-T), and C + E supplementation on the blood parameters of Arapaima gigas grown in net cages for 45 days. Four treatments were tested: control (commercial feed); C800; E500 and C + E (800 + 500) with supplementation of 800 mg AA kg- 1, 500 mg α-T kg- 1 and 800 + 500 mg AA + α-T kg- 1, respectively. Hematocrit (Ht), red blood cells (RBC), and hemoglobin concentration (Hb) (oxidative status indicators), thrombocytes and leukocytes (immunological indicators), plasma protein and glucose were evaluated. Fish fed vitamin C and C + E supplemented diets showed greater weight gain and survival. Dietary vitamin C and C + E diet supplementation resulted in increased Ht, Hb, RBC, MCHC, total leukocytes, total proteins, thrombocytes and eosinophils compared to the control and α-T. The α-tocopherol-supplemented diet reduced the number of total thrombocytes, lymphocytes and neutrophils and increased glucose and eosinophils relatively to the control. In general, leukocytes and thrombocytes were good indicators of the efficiency of vitamin on the defense mechanism of the A. gigas reared in cages. Results indicate that high α-T diet supplementation provides no benefit for the maintenance of the oxidative or the immunological status of A. gigas. However, it was demonstrated that high dietary AA improves A. gigas immunological status. Red blood cell indices and immune system indicators showed no synergistic effect between the vitamins after supplementing the A. gigas diet with α-T + AA. © 2006 Elsevier Inc. All rights reserved.

Brood care and male behavior in queenless Acromyrmex subterraneus brunneus (Hymenoptera: Formicidae) colonies under laboratory conditions

In this study we describe and quantify the brood care performed by workers in queenless colonies of the leaf-cutting ant Acromyrmex subterraneus brunneus. Fifteen behavioral acts were recorded in the three colonies studied. The behavioral repertoire of males was more limited, with only four behavioral acts being observed: feeding through workers, collecting staphylae and self-feeding, mutual grooming between adults (worker-males), and self-grooming. Males were also found to be able to collect food (staphylae or fungal hyphae) from the fungus garden and to feed themselves, not requiring workers for this activity. This study contributes to a better understanding of the basic biology of leaf-cutting ant colonies, with the description and quantification of the activities performed by the members of a colony in a situation of the loss of the fertile caste.

Isolation and growth of the symbiotic fungus of Atta capiguara (Hymenoptera: Formicidae)

This work's objectives were to isolate and evaluate the growth of the symbiotic fungus of Atta capiguara Gonçalves on artificial medium, under different pH and temperature conditions. Isolation was accomplished using the following media: Sabouraud, oat-agar, PDA, and PDA with the addition of extracts from the grasses Paspalum sp. Flügge and Hyparrhenia rufa (Nees) Stapf.. The medium used in the growth study was PDA with the addition of a Paspalum sp. (0.22%, w/v) extract at initial pH values of 4.5, 6.0, and 7.5. Mycelium disks were transferred to plates containing the culture medium. The plates were maintained at temperatures of 20, 23, and 26 ± 1°C. Mycelial radial growth evaluations were performed at 7, 14, 21, 28, and 35 days of incubation. Fungus isolation was obtained in all media studied. The highest radial means were obtained at initial pH values of 6.0 and 7.5 and temperatures of 23 and 26± 1°C. Greater plot losses occurred at the initial pH condition of 7.5. In general, A. capiguara fungi can be grown in the medium studied, at an initial pH of 6.0 and temperatures of 23 or 26± 1°C. Radial growth evaluations at 14 and 28 days of incubation can be recommended for substrate studies involving the symbiotic fungus.

Microdon tigrinus (Diptera, Syrphidae): Populational fluctuations and specificity to the nest of Acromyrmex coronatus (Hymenoptera: Formicidae)

This study was performed in the southern and southeastern regions of Brazil, visiting numerous municipalities, over a period of 25 years, excavating nests of 12 species of leaf-cutting ants of the Acromyrmex genus. Larvae and pupae of Microdon tigrinus were found only in nests of the leaf-cutting ant Acromyrmex coronatus, indicating high specificity. Observation showed that larvae and pupae were well accepted in the nests and the adults, immediately after puparia eclosion and prior to wing distension, were not attacked by the workers, suggesting that they produce semiochemicals for a short time period until they arrive outside the Acromyrmex coronatus nest. It was postulated that these larvae feed on the organic detritus of the nest, as shown for Microdon larvae of other species.

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.

Variação genética, interação genótipo solo e ganhos na seleção em teste de progěnies de Corymbia citriodora Hook em Luiz Antonio, São Paulo

The aim of this study was to investigate the genetic variation, the genotype × soil interaction and the selection among and within Corymbia citriodora progenies in three different kinds of soils (Red Latossol, Quartz Sand and Purple Latossol), which occur in the Luiz Antônio Experimental Station, São Paulo State, Brazil. The progeny test was established 1983, using 56 open-pollinated families of C. citriodora. Twenty fve years after planting the following traits were measured: height, diameter at breast height (Dbh), stem form and survival. Best growth occurred in Purple Latossol. Significant differences among progenies were detected for most traits in all sites, suggesting the possibility of improvement by selection. In the analysis with sites, Significant differences among locals, progenies and genotypes × soil interaction were detected, confiming that the tested material has sufficient genetic variation to be explored by selection in all sites. The analysis of genotype × soil interaction indicates that growth traits present single interaction and the same progenies can be selected in each site. On the order hand, genotype × soil interaction for stem form and survival was complex; and specifc progenies need to be selected for each kind of soil. The population, due to its high genetic variation and strong genetic control of traits, permits to obtain considerable genetic gains by selection among and within progenies.

Effect of different radiopacifying agents on the physicochemical properties of white portland cement and white mineral trioxide aggregate

Introduction: The aim of this study was to evaluate the pH, calcium ion release, setting time, and solubility of white mineral trioxide aggregate (WMTA) and white Portland cement (WPC) combined with the following radiopacifying agents: bismuth oxide (BO), calcium tungstate (CT), and zirconium oxide (ZO). Methods: Fifty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH and calcium release (atomic absorption spectrophotometry) at 3, 24, 72, and 168 hours. For evaluation of setting time, each material was analyzed according to the American Society for Testing and Materials guidelines 266/08. The solubility test was performed according to American National Standards Institute/American Dental Association specification no. 57/2000. Solubility, setting time, and pH values were compared by using analysis of variance and Tukey test, and the values of calcium release were compared by the Kruskal-Wallis and Miller tests. The significance level was set at 5%. Results: The pH and calcium release were higher at 3 and 24 hours. WPC was the material with the higher values for both properties. WMTA had the greatest solubility among all materials (P <.05). All radiopacifiers increased the setting time of WPC, and WMTA had the shortest setting time among all materials (P < .05). Conclusions: All materials released calcium ions. Except for WPC/CT at 168 hours, all materials promoted an alkaline pH. On the basis of the obtained results, ZO and CT can be considered as potential radiopacifying agents to be used in combination with Portland cement. Copyright © 2012 American Association of Endodontists.

Variação e parâmetros genéticos em teste de progênies de polinização livre de Peltophorum dubium (Sprengel) taubert em Luiz Antonio -SP

Intensive deforestation and forest fragmentation of the Brazilian forest biomes has contributed to increase the number of trees species under the risk of extinction. Peltophorum dubium (Sprengel) Taubert is one of these species. Some of its populations are being conserved ex situ by the Instituto Florestal de São Paulo through provenance and progeny tests. The aim of this study was to investigate the genetic variation and to estimate genetic parameters at age 24 years in a progeny test of P. dubium established in Luiz Antônio, São Paulo State, Brazil. The trial was established in a random block design, with six replications, five plants per plot and 18 open-pollinated progenies. Measured were: diameter at breast height (DBH), height and stem form. The genetic parameters heritability, genetic variation and effective population size were estimated. Significant genetic differences were observed only for DBH. This trait also presented a high coefficient of genetic variation (CV g=4.8%) and heritability, especially among progeny means (h m 2=0.6607). This indicates that DBH is the most indicated trait for selection in the population. The effective population size conserved ex situ in the test was estimated to be 38.9. Concerning genetic conservation, although the effective population size in the test is small, the values of the genetic variation and of the heritability indicate that the ex situ population has sufficient genetic variation and potential to respond to changes promoted by natural and artificial selection.

Multimodal exercise intervention improves frontal cognitive functions and gait in Alzheimer's disease: A controlled trial

Aim: The objective of the present study was to investigate the effect of a multimodal exercise intervention on frontal cognitive functions and kinematic gait parameters in patients with Alzheimer's disease. Methods: A sample of elderly patients with Alzheimer's disease (n=27) were assigned to a training group (n=14; aged 78.0±7.3years) and a control group (n=13; aged 77.1±7.4years). Multimodal exercise intervention includes motor activities and cognitive tasks simultaneously. The participants attended a 1-h session three times a week for 16weeks, and the control participants maintained their regular daily activities during the same period. The frontal cognitive functions were evaluated using the Frontal Assessment Battery, the Clock Drawing Test and the Symbol Search Subtest. The kinematic parameters of gait-cadence, stride length and stride speed were analyzed under two conditions: (i) free gait (single task); and (ii) gait with frontal cognitive task (walking and counting down from 20 - dual task). Results and discussion: The patients in the intervention group significantly increased the scores in frontal cognitive variables, Frontal Assessment Battery (P<0.001) and Symbol Search Subtest (P<0.001) after the 16-week period. The control group decreased the scores in the Clock Drawing Test (P=0.001) and increased the number of counting errors during the dual task (P=0.008) after the same period. Conclusion: The multimodal exercise intervention improved the frontal cognitive functions in patients with Alzheimer's disease. © 2012 Japan Geriatrics Society.

Functional capacity and assistance from the caregiver during daily activities in Brazilian children with cerebral palsy

Background: Cerebral Palsy (CP) presents changes in posture and movement as a core characteristic, which requires multiprofessional clinical treatments during childrens habilitation or rehabilitation. Besides clinical treatment, it is fundamental that professionals use evaluation systems to quantify the difficulties presented to the individual and their families in their daily lives. We aimed to investigate the functional capacity of individuals with CP and the amount of assistance required by the caregiver in day-to-day activities. Methods. Twenty patients with CP, six-year-old on average, were evaluated. The Pediatric Evaluation Inventory of Incapacities was used (PEDI - Pediatric Evaluation Disability Inventory), a system adapted for Brazil that evaluates child's dysfunction in three 3 dimensions: self-care, mobility and social function. To compare the three areas, repeated measures analysis of variance (ANOVA) were used. Results: We found the following results regarding the functional capacity of children: self-care, 27.4%, ±17.5; mobility, 25.8%, ±33.3 and social function, 36.3%, ±27.7. The results of the demand of aid from the caregiver according to each dimension were: self-care, 9.7%, ±19.9; mobility, 14.1%, ± 20.9 and social function, 19.8%, ±26.1. Conclusion: We indicated that there was no difference between the performance of the subjects in areas of self-care, mobility and social function considering the functional skills and assistance required by the caregiver. © 2013 Monteiro et al; licensee BioMed Central Ltd.

Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Deposition and photo-induced electrical resistivity of dip-coated NiO thin films from a precipitation process

Thin films of the semiconductor NiO are deposited using a straightforward combination of simple and versatile techniques: the co-precipitation in aqueous media along with the dip- coating process. The obtained material is characterized by gravimetric/differential thermal analysis (TG-DTA) and X-ray diffraction technique. TG curve shows 30 % of total mass loss, whereas DTA indicates the formation of the NiO phase about 578 K (305 C). X-ray diffraction (XRD) data confirms the FCC crystalline phase of NiO, whose crystallinity increases with thermal annealing temperature. UV-Vis optical absorption measurements are carried out for films deposited on quartz substrate in order to avoid the masking of bandgap evaluation by substrate spectra overlapping. The evaluated bandgap is about 3.0 eV. Current-voltage (I-V) curves measured for different temperatures as well as the temperature-dependent resistivity data show typical semiconductor behavior with the resistivity increasing with the decreasing of temperature. The Arrhenius plot reveals a level 233 meV above the conduction band top, which was attributed to Ni2+ vacancy level, responsible for the p-type electrical nature of NiO, even in undoped samples. Light irradiation on the films leads to a remarkable behavior, because above bandgap light induced a resistivity increase, despite the electron-hole generation. This performance was associated with excitation of the Ni 2+ vacancy level, due to the proximity between energy levels. © 2012 Springer Science+Business Media New York.

Lipase production by Botryosphaeria ribis EC-01 on soybean and castorbean meals: Optimization, immobilization, and application for biodiesel production

The effects of soybean and castorbean meals were evaluated separately, and in combinations at different ratios, as substrates for lipase production by Botryosphaeria ribis EC-01 in submerged fermentation using only distilled water. The addition of glycerol analytical grade (AG) and glycerol crude (CG) to soybean and castorbean meals separately and in combination, were also examined for lipase production. Glycerol-AG increased enzyme production, whereas glycerol-CG decreased it. A 24 factorial design was developed to determine the best concentrations of soybean meal, castorbean meal, glycerol-AG, and KH2PO4 to optimize lipase production by B. ribis EC-01. Soybean meal and glycerol-AG had a significant effect on lipase production, whereas castorbean meal did not. A second treatment (22 factorial design central composite) was developed, and optimal lipase production (4,820 U/g of dry solids content (ds)) was obtained when B. ribis EC-01 was grown on 0.5 % (w/v) soybean meal and 5.2 % (v/v) glycerol in distilled water, which was in agreement with the predicted value (4,892 U/g ds) calculated by the model. The unitary cost of lipase production determined under the optimized conditions developed ranged from US$0.42 to 0.44 based on nutrient costs. The fungal lipase was immobilized onto Celite and showed high thermal stability and was used for transesterification of soybean oil in methanol (1:3) resulting in 36 % of fatty acyl alkyl ester content. The apparent K m and V max were determined and were 1.86 mM and 14.29 μmol min -1 mg-1, respectively. © 2013 Springer Science+Business Media New York.

Improvement in clinical signs and cellular immunity of dogs with visceral leishmaniasis using the immunomodulator P-MAPA

This study investigated the immunotherapeutic potential of the protein aggregate magnesium-ammonium phospholinoleate-palmitoleate anhydride immuno-modulator (P-MAPA) on canine visceral leishmaniasis. Twenty mongrel dogs presenting clinical symptoms compatible with leishmaniasis and diagnosis confirmed by the detection of anti-leishmania antibodies were studied. Ten dogs received 15 doses of the immunomodulator (2.0mg/kg) intramuscularly, and 10 received saline as a placebo. Skin and peripheral blood samples were collected following administration of the immunomodulator. The groups were followed to observe for clinical signals of remission; parasite load in the skin biopsies using real-time PCR, the cytokines IL-2, IL-10 and IFN-γ in the supernatant of peripheral blood mononuclear cells stimulated in vitro with either total promastigote antigen or phytohemagglutinin measured by capture ELISA, and changes in CD4+ and CD8+ T cell subpopulations evaluated by flow cytometry. Comparison between the groups showed that treatment with the immunomodulator promoted improvement in clinical signs and a significant reduction in parasite load in the skin. In peripheral blood mononuclear cell cultures, supernatants showed a decrease in IL-10 levels and an increase in IL-2 and IFN-γ. An increase in CD8+ T cells was observed in peripheral blood. In addition, the in vitro leishmanicidal action of P-MAPA was investigated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and no leishmanicidal activity was detected. These findings suggest that P-MAPA has potential as an immunotherapeutic drug in canine visceral leishmaniasis, since it assists in reestablishing partial immunocompetence of infected dogs. © 2013 Elsevier B.V.

Degree of conversion and hardness of two different systems of the vitrebond™ glass ionomer cement light cured with blue LED

This study investigated the physicochemical properties of the new formulation of the glass ionomer cements through hardness test and degree of conversion by infrared spectroscopy (FTIR). Forty specimens (n = 40) were made in a metallic mold (4 mm diameter × 2 mm thickness) with two resin-modified glass ionomer cements, Vitrebond™ and Vitrebond™ Plus (3M/ ESPE). Each specimen was light cured with blue LED with power density of 500 mW/cm2during 30 s. Immediately after light curing, 24h, 48h and 7 days the hardness and degree of conversion was determined. The Vickers hardness was performed by the MMT-3 microhardness tester using load of 50 gm force for 30 seconds. For degree of conversion, the specimens were pulverized, pressed with KBr and analyzed with FT-IR (Nexus 470). The statistical analysis of the data by ANOVA showed that the Vitrebond™ and Vitrebond™ Plus were no difference significant between the same storage times (p > 0.05). For degree of conversion, the Vitrebond™ and Vitrebond™ Plus were statistically different in all storage times after light curing. The Vitrebond™ showed higher values than Vitrebond™ Plus (p < 0.05). The performance of Vitrebond™ had greater results for degree of conversion than Vitrebond™ Plus. The correlation between hardness and degree of conversion was no evidence in this study.