94 resultados para LENTES DE HIDROGEL DE SILICONA


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Na presente publicação apresenta-se análises de um conjunto de manuais escolares que circularam na Escola Normal brasileira e portuguesa entre meados do século XIX e meados do século XX a partir de diferentes olhares, reeditando em outra chave o processo original de circulação de ideias entre Brasil e Portugal no qual esses materiais se inserem. Orientados por outros estudos que tratam do mesmo tema, os autores realizaram recolha nos dois países a fim de comprovar a circulação do corpus empírico que, ao final, foi definido como fonte. Assim, chegou-se ao seguinte conjunto de manuais didáticos: Elementos de Pedagogia de Affreixo & Freire (1870); Curso Prático de Pedagogia Destinado aos Alunos-Mestres das Escolas Normaes Primarias e aos Instituidores em Exercício de Daligault (1874); Lições de Pedagogia Geral e de História da Educação de Pimentel Filho (1875); Lições de Pedologia e Pedagogia Experimental de Faria de Vasconcelos (1910); Lições de Metodologia, de Fonseca Lage (1920); A arte da leitura, de Mário Gonçalves Viana (1949) e Lições de Pedagogia, de Aquiles Archêro Junior (1955). Os pesquisadores utilizam diferentes lentes para tecer suas análises e, cada um segundo sua especialidade de pesquisa, aprofunda aspectos que, juntos, compõem um painel interpretativo sobre o processo de escolarização e seus espaços, a normatização do trabalho docente, os princípios que nortearam a seleção cultural para a escola primária, a constituição de modos e métodos de ensino para realizar os objetivos educacionais e a especificidade que assumem os materiais e o ensino da leitura e da escrita nessa instituição. Todas as análises reiteram a importância dos impressos na consolidação da escola primária portuguesa e brasileira, notadamente no que se refere às prescrições feitas nos manuais escolares que, em trânsito, configuram-se como palavras viajeiras.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The retromolar triangle is a triangular area located in the mandible, posteriorly to the last molar. This region, due its thickness and bone density, is widely used for the installation of devices that provide an anchorage system for the movement of the lower molars. The aim of this research is to provide morphometric data of the mucosa thickness of the retromolar triangle. Twenty-five patients of portuguese nationality, with indication for extraction of the impacted lower third molar (right and/or left), were studied. In the region of the retromolar triangle were demarcated 3 points corresponding to the vertices of a triangle whose the base was torned for the distal face of the lower third molar and the lenght of the sides corresponded to vestibulolingual dimension of the same tooth, then was demarcated a fourth point corresponding to the geometric center of the triangle. Then, using a finger spreader with silicone stop were measured the mucosal tickness at each point. The data obtained were tabulated and analyzed. The lowest average value found was 5.5mm on the right side and the highest average value found was 7.13mm on the left side. Considering the mean values obtained at the points of the retromolar triangle mucosa measured in this study, we conclude that the retromolar triangle shows thick mucosa, so the mini-implants indicated for this region should have a long transmucosal neck.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main objective of this work was to mount and test an experimental model to measure the hydraulic conductance of ex vivo dentin. Seventeen healthy third molars, with indication of extraction of healthy donors aged between 15 and 30 years were obtained by informed consent. After cleaning them, disinfecting them, including them in resin epoxy and cutting them, there were 17 samples of dentin, corresponding to a disk of resin with a coronal section of tooth showing the dentin exposed on both sides of it. Three machines to measure the hydraulic conductance of the dentin were assembled according to the description of the model of Pashley. Samples were installed in a Chamber of diffusion, connected by using silicone tubes to a graduated transfer pipette and a 20cm water column. Through the displacement of a bubble of water in the inside of the pipette, the hydraulic conductance of each sample was measured 3 times on the 14th, 21st, 28th and 35th day post extraction. The data were tabulated and analyzed statistically. There is no SS difference in the rate of flow of a measured sample in the three machines (p=0.5937). There is no SS difference in measurements of the hydraulic conductance of 13 samples of human dentin measured in days 14, 21, 28 and 35 postextraction (p=0.0704). It is possible to mount an experimental model to study the hydraulic conductance of dentin ex vivo, based on the model of Pashley. The model seems to be reliable, but more research is needed in order to validate its reliability.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Com o avanço das técnicas e materiais restauradores, o cirurgião-dentista tornou-se capaz de solucionar problemas estéticos de forma conservadora. Esse relato de caso descreve a associação das técnicas de microabrasão e fechamento de diastemas com resinas compostas diretas. A paciente do sexo feminino, 16 anos de idade, foi encaminhada pelo ortodontista à clínica de Dentística Restauradora para o fechamento de diastema. Após anamnese e exame clínico detalhado, constatou-se, também, a presença de manchas brancas de fluorose na face vestibular dos dentes anterossuperiores, sendo também proposto o procedimento de microabrasão. Por meio de modelos de estudo da paciente, foi realizado o enceramento diagnóstico, de forma a simular o fechamento dos diastemas. O modelo encerado foi moldado com silicona de condensação para servir como guia de orientação durante os procedimentos restauradores. O tratamento resultou na elevação da autoestima da paciente, pela obtenção de um sorriso mais harmonioso por meio da associação de técnicas estéticas conservadoras.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dental avulsion is the most severe type of traumatic tooth injuries because it causes damageto several structures and results in the complete displacement of the tooth from its socketin the alveolar bone. The ideal situation is to replant an exarticulated tooth immediatelyafter avulsion because the extraoral time is a determinant factor for treatment successand for a good prognosis. However, it is not always possible. The success of replantationdepends on a number of factors that may contribute to accelerate or minimize theoccurrence of root resorption or ankylosis, among which is the type and characteristicsof the medium used for temporary storage during the time elapsed between avulsionand replantation. Maintaining the tooth in an adequate wet medium that can preserve,as longer as possible, the vitality of the periodontal ligament cells that remain on rootsurface is the key to success of replantation. Recent research has led to the developmentof storage media that produce conditions that closely resemble the original socketenvironment, with adequate osmolality (cell pressure), pH, nutritional metabolites andglucose, and thus create the best possible conditions for storage. Although these storagemedia can now be purchased in the form of retail products, the most common scenariois that such a product will not be readily available at the moment of the accident Thispaper reviews the literature on the different storage media that have been investigatedfor avulsed teeth based on full-length papers retrieved from PubMed/Medline, Lilacs, BBOand SciELO electronic databases using the key words storage medium , transportationmedium , avulsion , tooth avulsion , replantation , tooth replantation , milk and propolis .After application of inclusion and exclusion criteria, 39 papers were selected and criticallyreviewed with respect to the characteristics, efficacy and ease of access of the storagemedium. The review of the lite

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Educação - IBRC

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper we present results of research conducted on the constitution of the identity of CEM (Centre for Mathematics Education), a group of mathematics teacher educators from the city of São Paulo, Brazil (1984-1997). We emphasize the processes of constitution of CEM’s identities, on the perspective of Oral History in Mathematics Education, of the Model of Semantic Fields and of theories of identities. As part of the broader endeavor of examining possibilities for constituting identities for the group, from several theoretical standpoints, here we report an exercise on constituting the identity of CEM from a Cartesian standpoint; the overall assumption is that we are not properly interested in what CEM is or was, but on the possibilities themselves. We argue that such analysis leads to an understanding of the group as being an accident involving the individual identities of its members but not to an understanding of CEM’s group identity as such.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Esse trabalho utiliza um sistema de visão catadióptrico para capturar imagens de um cenário natural agrícola e realizar o levantamento de regiões que possam auxiliar diversas aplicações na área da Robótica Móvel Agrícola. Os sistemas de visão catadióptricos buscam capturar uma imagem 360° do ambiente a partir da combinação de lentes e espelhos. A imagem omnidirecional é retificada e seus quadrantes são extraídos, originando quatro novas imagens que representam lados de visão do veículo. Uma etapa de segmentação por cor é proposta utilizando como base o algoritmo Otsu Thresholding. No final do processo, é possível visualizar as regiões de interesse de cada quadrante.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Biotecnologia - IQ

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The towns of Castro Alves and Rafael Jambeiro, central-east of Bahia state, are located in the east of São Francisco Craton, in granulite terrains of Salvador-Curaçá Belt, formed in Paleoproterozoic. The region of study contains ortognaisses of Caraíba Complex, metamafic and metaultramafic rocks of São José do Jacuípe Suite, metasedimentary rocks of Tanque Novo-Ipirá Complex, granitoids, pegmatites and alkaline rocks. The study carried out regional and detailed geological mapping in addition to petrographical and geochemical characterization of six areas in the search for targets of feldspar and white diopside, minerals used in ceramic industry. The areas consist of granitic ortognaisses interspersed with lenses of mafic granulite rocks, calc-silicate rock, banded iron formations, paragnaisses, quartzites, and bodies of quartz-feldspar or feldspar pegmatites and alkaline rocks that fill discontinuities. The region of study contains four deformations phases, with a predominance of ductile structures. The foliation Sn has N30E to N70W direction, high angle of dip and is characterized by compositional banding of granoblastic and felsic bands interspersed with nematoblastic or lepidoblastic mafic bands. A mineral or stretching lineation Ln is associated with Sn and has trend of S55E to S72E. The rocks have been suffered a regional metamorphism with granulite facies peak and partial retrogression to greenschist facies. Geochemical studies indicate that the green coloring calc-silicate rocks have lower SiO2, MgO and higher Fe2O3 content compared with white calcssilicate rocks. The alkaline rocks of the studied area have higher Na2O, SiO2 and lower K2O, Fe2O3 content compared with others Paleoproterozoic alkaline rocks of Bahia state. The targets of diopside are associated with white calc-silicate rocks, while the targets of feldspar are associated with paragnaisses, pegmatites and alkaline rocks