Diques clásticos na formação corumbataí (p) no nordeste da bacia do paraná, SP: Análise sistemática e significações estratigráficas, sedimentológicas e tectônicas

This paper aims to present the results of systematic survey on clastic dykes in the Corumbataí Formation (Permian), in the northeast region of the State of São Paulo. Besides this, the paper analyses genetic aspects of those features as well as their stratigraphic and sedimentologic implications in terms of geologic evolution of the northeastern Paraná Sedimentary Basin during Permian times. The field works had been developed in 3 main Corumbataí Formation outcrops (2 road cuts and a quarry) supposed to show the most important clastic dikes occurrences in the studied area. Basically, the sedimentary intrusions are formed by fine sand or silt size particles and had penetrated host rocks as near-vertical, centimeter thick, dykes (most common form) or as horizontal sheets, forming clastic sills (subsidiary form), both with variable geometric forms and dimensions. A lot of dyke walls show undulations suggesting pre-diagenetic clastic intrusions, probably near the ancient depositional surface. Almost all intrusions occur in the superior third portion of the Corumbataí Formation and some similar features seem to appear in the adjoining superposed Pirambóia Formation base. In this article the authors defend a seismic origin hypothesis for the clastic intrusions. It is important to mention that clastic intrusions tend to occur linked to expressive seismic events, with magnitude upper to 5. The analysis of isopach maps of the Permian and Mesozoic units of the Paraná Sedimentary Basin in the study area suggests a depositional system changing, from epicontinental sea conditions to shallow platform and, finally, to coastal deserts. Probably, this environmental change was driven by regional uplift accompanied by seismic events. It is possible that ancient seismicity triggered liquefaction processes and the resulting clastic intrusions. In this sense, those clastic features might be properly namedseismites.

Biological response to wollastonite doped α-tricalcium phosphate implants in hard and soft tissues in rats

The biological response following subcutaneous and bone implantation of β-wollastonite(β-W)-doped α-tricalcium phosphate bioceramics in rats was evaluated. Tested materials were: tricalcium phosphate (TCP), consisting of a mixture of α- and β-polymorphs; TCP doped with 5 wt. % of β-W (TCP5W), composed of α-TCP as only crystalline phase; and TCP doped with 15 wt. % of β-W (TCP 15), containing crystalline α-TCP and β-W. Cylinders of 2×1 mm were implanted in tibiae and backs of adult male Rattus norvegicus, Holtzman rats. After 7, 30 and 120 days, animals were sacrificed and the tissue blocks containing the implants were excised, fixed and processed for histological examination. TCP, TCP5W and TCP15W implants were biocompatible but neither bioactive nor biodegradable in rat subcutaneous tissue. They were not osteoinductive in connective tissue either. However, in rat bone tissue β-W-doped α-TCP implants (TCP5W and TCP 15W) were bioactive, biodegradable and osteoconductive. The rates of biodegradation and new bone formation observed for TCP5W and TCP15W implants in rat bone tissue were greater than for non-doped TCP.

Effects of mandibular fixed implant-supported prostheses on masticatory and swallowing functions in completely edentulous elderly individuals

Purpose: To evaluate the effect of oral rehabilitation with immediately loaded fixed implant-supported mandibular prostheses on chewing and swallowing in elderly individuals. Materials and Methods: Fifteen completely edentulous patients aged more than 60 years (10 women and rive men), wearing removable dentures in both arches, had a mandibular denture replaced by an implant-supported prosthesis. All individuals were evaluated before surgery and again 3, 6, and 18 months later with regard to mastication and swallowing conditions. Examinations entailed an interview, evaluation of tactile sensitivity of the face, and observation of food intake, masticatory type, formations of bolus, and pain during mastication. The swallowing evaluation comprised observation of clinical signs related to the oral and pharyngeal stages of swallowing, as well as the presence of oral residue. The findings of different evaluations before and 3, 6, and 18 months after the surgical-prosthetic procedure were statistically compared by analysis of variance for repeated measurements at a significance level of 5%. Results: The questionnaire revealed a reduction in complaints of masticatory and swallowing disturbances, a decreased need for liquid ingestion, and reduced choking and coughing. Clinical evaluations showed improved oral function and bolus propulsion for both solid and paste-consistency foods; pain during mastication was also resolved. Conclusion: Treatment with mandibular implant-supported dentures had positive effects on the clinical aspects of mastication and swallowing in elderly individuals.

Os Répteis do Município de São Paulo: Diversidade e ecologia da fauna pretérita e atual

The reptile fauna in the municipality of São Paulo is well sampled due to intensive collection in the last 100 years. In the present work we provide a checklist of reptile species in São Paulo municipality based on preserved specimens in scientific collections. The reptile fauna was also characterized by three ecological parameters: habitat use, substrate use, and diet. We recorded a total of 97 reptile species (two turtles, one crocodilian, 19 lizards, seven amphisbaenians, and 68 snakes). Approximately 70% of the lizards and 40% of the snakes are typical of forest habitats of the Serra do Mar mountain range. Other squamates are typical of open formations that occur mainly on inland Cerrado habitats. All turtles and the crocodilian are associated to riparian habitats. Approximately 63% of the lizards are predominantly terrestrial, and the remaining species are arboreal. Most species of snakes are terrestrial (38%) or subterranean/criptozoic (25%) whereas a smaller proportion are arboreal (18%) or aquatic (9%). Lizards feed upon arthropods. Almost 50% of the snake species are specialized or feed mainly upon anuran amphibians. Other important items consumed by snakes are mammals (24%), lizards (18%), subterranean vertebrates (10%), and invertebrates (earthworms, mollusks and arthropods; 15%). A total of 51 reptile species have not been recorded for the last six years. Probably many of these species are extinct in the region due the intense local urbanization and habitat loss. The survey of species collected in São Paulo municipality and received in the Instituto Butantan in recent years allowed the identification of 10 lizards at least 42 snake species already occurring in the region. The high species richness of the original fauna seems related to the geographic location of the municipality, in a contact zone between forested areas of the Atlantic Forest (ombrophilous forest) and open formations (savannas, high-altitude grassland). Thus, the original habitat composition probably allowed sympatry among different species pools typical of both open and forested formations. The extant snake fauna recorded in the last three years indicates a higher loss of the species in open formations when compared to the forested areas.

Geotechnical and structural behavior of the railroad track in large-scale apparatus

This paper analyses the static and dynamic behavior of the railroad track model in laboratory. Measurements of stresses and strains on a large-scale railroad track apparatus were studied. The model includes: compacted soil, representing the final layers of platform, ballast layer, and ties (steel, wooden, and pre-stressed concrete). The soil and soil ballast interface were instrumented with pneumatic stress gauge. Settlement measurement device were positioned at the same levels as the load cells. Loads were applied by hydraulic actuators, statically and dynamically. After the prescribed number of load cycles, in pre-determined intervals, stresses and strains were measured. Observations indicate that stress and strain distributions, transmitted by wooden or steel ties, behave similarly. A more favorable behavior was observed with pre-stressed concrete mono block ties. Non-linear response was observed after a threshold numbers of cycles were surpassed, showing that the strain modulus increases with the numbers of cycles. © 2009 IOS Press.

Análise morfotectônica da Bacia do rio Santo anastácio, sp, através de parâmetros fluviomorfométricos e de registros paleossísmicos

Fluvial morphometry is method of great value regarding neotectonic analysis of extensive areas because streams, besides representing one of the main agents in the relief modeling, quickly adjust their thalwegs to even the most gentle crustal deformations. The purpose of this paper is to present the application of some morphometric techniques in the Santo Anastácio River hydrographic basin in order to identify recent tectonic deformations. Additionally, we show liquefaction structures identified in the basin and interpreted here as seismites linked to ancient earthquakes (magnitudes greater than 5). The morphometric survey includes longitudinal stream profile analysis, RDE (declivity versus stream length) index application, and the sinuosity study of the Santo Anastácio River channel. Geologic substrate comprises Cretaceous siliciclastic rocks of the Caiuá and Bauru groups, locally covered by Cenozoic sediments (alluvial plains, terrace deposits, colluvial aprons, as well as in situ regoliths). Considering that liquefaction structures affect dark clay layers of 32.340±320 year BP age (14C dating), a lower age limit for the ancient earthquake is triggered in that region. The authors believe that neotectonic understanding of the Western São Paulo State Plateau is important to the geologic and geomorphologic evolution of that landscape and to the consequent territorial planning and occupation.

Influência do arcabouço hidroestratigráfico nas ocorrências de arsênio em águas subterrâneas ao longo do corredor termal do rio Uruguai (Argentina - Brasil - Uruguai)

The Thermal Corridor of Uruguay River is located in the triple border of Argentine, Brazil and Uruguay, and shows an intense economic thermal tourism activity, mainly based on groundwaters from Guarani Aquifer System (GAS). Recent studies have pointed out the occurrence of high concentrations of arsenic (>10 μg/L) in GAS groundwater in this area. The complex geological and hydrogeological framework in the area is associated to the Paraná Basin geological evolution south of the Assuncion-Rio Grande Arch; it encompass paleozoic marine sequences and continental sequences permian/eotriassic to mesozoic in age, which are covered by basaltic lavas of Serra Geral Formation. Iron oxide coatings have been described in sandstones of Buena Vista and Sanga do Cabral formations, which underlie GAS units. Arsenic occurrence is associated to sodium bicarbonate groundwater with pH values over 8.0. Arsenic is released to groundwater by desorption from iron oxides/hydroxides, as result of the higher pH of these waters, indicating that arsenic is released from the units that underlie GAS units. Increase in chromium and uranium concentrations are also related to high pH groundwaters, thus indicating special care on using groundwater from this region.

A grande colisão pré-cambriana do sudeste brasileiro e a estruturação regional

This paper presents a review on the geotectonic framework of the Southeastern Brazil and neighborhoods, and its importance in the regional geologic evolution, which was exposed as a main conference at the XI Symposium of Southeast Geology (São Pedro, SP, 2009). Although the geologic history dates back to the Archean, and Paleo to Mesoproterozoic processes related to the evolution of the Columbia and Rodinia supercontinents occurred, it was in the Neoproterozoic that the most important structural features developed due to collisional tectonics. The collisions began in the Brasiliano I (900-700 Ma), but mainly developed during the Brasiliano II (670-530 Ma) and ended in the Brasiliano III (580-490 Ma), resulting the orogenic systems of Mantiqueira and Tocantins. The final consolidation resulted in Gondwana, around 460 My in the part which correspond to the South America Platform. The structural features represent an important heritage that controlled much the Phanerozic geologic and tectonic processes: the formation of the Paraná Basin in the Ordovician-Jurassic, the South Atlantian reactivation (active magmatism and Paraná LIP, rifting, morphogenesis and the Atlantic opening), and the Neogene-Quaternary intraplate discrete neotectonism.

Herpetofauna, municipality of Porto Murtinho, Chaco region, state of Mato Grosso do Sul, Brazil

Among the physiographic regions included in the central South American diagonal of open formations, the Chaco, with some endemic species, represents the southernmost dry area. In Brazil, the Chaco is found in southwestern corner of Mato Grosso do Sul state, mostly in the municipality of Porto Murtinho along the Paraguay and Apa rivers. From February 2008 to December 2009, we carried out an inventory of amphibians and reptiles in Porto Murtinho, using pitfall traps, time-limited searches, and occasional encounters. A total of 34 amphibian and 39 reptile species were registered. Although some typical Chacoan species were found, most of the species are open area dwellers that also occur in other open biomes, such as the Cerrado and Caatinga. © 2010 Check List and Authors.

Elaboração da carta geotécnica de suscetibilidade de um trecho da rodovia marechal rondon - sp-300 (SP, Brasil)

The highways are enterprises of great longitudinal extension that cross several types of lands, that possess different geologic, geomorphologic, pedologic and vegetation conditions. In the environmental management of highways the importance of the use of Engineering Geological Maps of Susceptibility was noticed, for being documents that inter-relates several information of the environment. This way, this research objectified the elaboration of this type of map and the indication of lines of direction for the conservation of the Highway Marechal Rondon - SP-300. For its elaboration the Map of Declivity, the delimited Homogeneous Physiographic Units, the processes of the superficial dynamics mapped and the use of the ground was used. Its elaboration evidenced its importance for the environmental management of highways, in view of the prevention, the monitoring and the correction of the adverse processes that can occur in this type of enterprise.

O Grupo Canastra em sua área-tipo, região de Tapira, sudoeste do estado de Minas Gerais

This work aimed at describing the Neoproterozoic evolution of a Southern Brasília Fold Belt segment, in Tapira area (southwest of Minas Gerais state, Brazil), using detailed geologic mapping. This area, the Canastra Group type-area, has showed great tectonic and stratigraphic complexities unlike the simplicity suggested in previous works. From recognizing the main tectonic discontinuities, it was possible to subdivide the area into some domains. In the west domain, they were individualized in tectonic sheet I, marked by pelitic rocks and pelitic-graphite rocks with psammitic intercalations, and II, pelitic rocks with psammitic and mafic-ultramafic intercalations overlapped by gneisses. In the east domain, a group of three tectonic sheets was defined, in which, in the two lower tectonic sheets, pelitic and pelitic-graphite rocks with psammitic rock intercalations prevailed, which is different in metamorphic conditions. The lower tectonic sheet is marked by mineralogical associations with muscovite + chlorite + quartz ± graphite ± albite, without biotite; however, the superior one is with muscovite + quartz + garnet ± chlorite ± biotite ± chloritoid ± graphite ± albite. In the upper tectonic sheet, pelitic rocks with local contributions of psammitic and ultramafics rocks occur. In the south domain, psammitic rocks basically occur with contributions of pelitics and rudaceous rocks, where the preservation of textures and sedimentary structures is common. Rocks of the several domains are interpreted as part of a passive continental margin basin, located in the western margin of the São Francisco paleocontinent. Thus, the south domain rocks would represent the facies of proximal platform; rocks of the lower and middle tectonic sheets (east domain) and of the tectonic sheet I (west domain) are of facies distal platform; and the ones from the upper tectonic sheet (east domain) and tectonic sheet II (west domain) were acknowledged as deposited in an environment of continental shelf and/or oceanic seafoor.

Polarização induzida aplicada no estudo de ocorrencia de cobre localizada a nordeste de Caçapava do Sul (RS)

Mineral research works are fundamentals for recognition and incorporation of new reserves. This paper present an integrated analysis of geologic and metallogenetics data, with results gotten from the application of the Induced Polarization geophysical method, in an copper ore occurrence, inserted in Camaquã sedimentary basin, situated in northeast of Caçapava do Sul city (RS). In area ocurr arkosean arenites average coarse, the intensely silicified and recrystallized, pertaining to Passo da Promessa Formation. The presence of azurita and malachite in breakings and high porosity zones of the host rock characterizes the mineral occurrence in surface, located in the crossing two fault families. The inversion models indicate the predominance of high chargeability in vulcanics tuff, rock of high porosity in relation to the andesites and metaconglomerates gifts in the area. The strong structural control of the mineral occurrence associated the high chargeability in volcanic tuff is indications of the hydrothermal fluid access by means of faults, until rocks with great porosity, where it occurred disseminations of copper sulfides in depth and carbonates in surface.

Relação do meio físico com o manejo sustentável de plantio de eucalipto em áreas de terrenos acidentados - A Fazenda Santa Edwirges, Vale do Paraíba, Sudeste do Brasil

This study intends to evaluate the effects of landscape physical elements (rocks and relief) associated with silviculture activities. The study was carried out on a small farm (Fazenda Santa Edwirges) covered by Eucalyptus forested situated in the Paraiba do Sul Basin, Southeast Brazil. The methodology consisted of detailed geological and geomorphological studies at 1:10,000 scale, and laboratory analysis of soil physical properties. The results showed three geologic-geomorphologic associations (ridge escarpment with granitic rocks, steep and gentle hills cut by shear zones and gentle hill with alluvial sediments) present high vulnerability for the development of the physical processes such as accelerated erosion landslides and flooding. In contrast, mountains associated with gneissic rocks present smaller vulnerability and high resilience for the development of the physical processes. The results have showed the importance of considering the interactions among landscape physical for the eucalyptus forest management contributing to a better selection area for eucalyptus cultivation and minimize adverse environment impact in road design.

Analysis on turning Ti-6Al-4V with different cooling methods

The aim of this paper is to optimize the machining of Ti-6Al-4V alloy, by studying the chip formation, roughness and tool wear for different cooling conditions. The results were compared between cooling methods, minimal quantity of fluid (MQF) and flooding, and also without fluid for the tool H13A. The turning of Ti-6Al-4V has shown good results on roughness (0, 8μm) and tool life, which was 11% lower with MQF than with the flooding method. The tool wear causes variation of the shear angle, which promotes strength hardening of the chip. As a result, the machined surface could be damaged. The use of the cutting fluid helps to save the cutting edge and could reduce the strength hardening. Nevertheless, it could also facilitate the formation of built-up edge. The nucleation of alpha lamellar colonies can occur due to a combination of deformation rates and temperature, mainly when the flooding is used, but it's not conclusive. The lamellar colonies were also found with the MQF in some regions, however, this structure did not show hardness variation compared to equiaxial. For all this reasons, the machining parameters might be carefully chosen.

Broadband NIR emission in novel sol-gel Er3+-doped SiO 2-Nb2O5 glass ceramic planar waveguides for photonic applications

This paper reports on the sol-gel preparation and structural and optical characterization of new Er3+-doped SiO2-Nb 2O5 nanocomposite planar waveguides. Erbium-doped (100-x)SiO2-xNb2O5 waveguides were deposited on silica-on-silicon substrates and Si(1 0 0) by the dip-coating technique. The waveguides exhibited uniform refractive index distribution across the thickness, efficient light injection at 1538 nm, and low losses at 632 and 1538 nm. The band-gap values lied between 4.12 eV and 3.55 eV for W1-W5, respectively, showing an excellent transparency in the visible and near infrared region for the waveguides. Fourier Transform Infrared (FTIR) Spectroscopy analysis evidenced SiO2-Nb2O5 nanocomposite formation with controlled phase separation in the films. The HRTEM and XRD analyses revealed Nb2O5 orthorhombic T-phase nanocrystals dispersed in a silica-based host. Photoluminescence (PL) analysis showed a broad band emission at 1531 nm, assigned to the 4I13/2 → 4I15/2 transition of the Er3+ ions present in the nanocomposite, with a full-width at half medium of 48-68 nm, depending on the niobium content and annealing. Hence, these waveguides are excellent candidates for application in integrated optics, especially in EDWA and WDM devices. © 2012 Elsevier B.V. All rights reserved.