Uso do ATP para simulações de descargas atmosféricas em para-raios de 15 kV dos serviços auxiliares de subestações de energia elétrica

This paper addresses the topics required for the selection of surge arresters used, the output of autotransformers, which protect the system Auxiliary Services (SE) of an electrical substation. Surge arresters used are part of the Protection System Lightning (SPDA). Transmission lines mostly run through regions with orographic well diversified and have constant weather changes, which lead to many undesirable interactions with electromagnetic phenomena, such as giving rise to blackout on 10 November 2009, which left nine states without power, which led to unplanned shutdowns in the system that left millions of people without electricity. This work of completion is to determine whether the method used in the selection of surge arresters meet the protection needs faced by a substation auxiliary services, through the use of software use ATPDraw

Comparação da eficiência térmica de trocadores de calor no laboratório de sistemas térmicos da Faculdade de Engenharia

This work aims to verify and compare the efficiency of heat exchangers used in the thermal systems laboratory at Faculdade de Engenharia do Campus de Guaratinguetá - UNESP. Basically, it has been studied two types of heat exchangers: plate type, operating in parallel flow and counter-flow, shell and tube type and also operating in parallel flow and counter flow. Initially it has been presented the didactic equipment and procedures for use of these heat exchangers in the proposed experiments. With the results obtained from the experiments, comparisons were made in order to define the behavior of the heat exchangers regarding some variables. In the study, one comes to the conclusion that the results from shell and tube type of heat exchanger, used in the thermal systems lab, are superior in all conditions analyzed

Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails

Perfil dos pesquisadores PQ do CNPQ da área de Engenharia de Produção

There is a need for ongoing evaluation of the researchers not only engineering and production in all areas of knowledge engineering. To check the quality and veracity of scientific production, the CNPq is a brazillian government agency designed to evaluate researchers, classify them and give the encouragement and incentive for their research. This study quantifies the CNPq researchers in the field of Production Engineering according to the time of operation in research, number of guidelines for masters and doctoral, number of articles in national and international journals or magazines and congresses. The classification of these researchers, according to the proposed quantification, is confronted with the level of research they have in CNPq. The researcher starts his career at level 2, after it spending levels for 1D, 1C, 1B reaches to the highest level 1A. The main conclusion to be drawn from this study is that excellent researchers with a significant number of guidelines, bitter years in the early levels because of the rules of the CNPq which only allows a researcher to achieve the highest levels after many years of research

Contribuições do PIBID para a formação inicial de professores: um olhar dos licenciandos em física da Faculdade de Engenharia de Guaratinguetá

The current work aims to analyze the contributions of PIBID for initial graduation of the teachers, in view of the undergraduates of Physics Course at UNESP Guaratinguetá . A brief literature survey about the national situation of teacher education was performed, at which the main difficulties and challenges, as well as the solutions stated in place by the government to solve them, have been highlighted. A description of the historical of PIBID at UNESP, from the institutional project to reach the subproject developed by Physics Course of Guaratinguetá, was presented. To characterize the development of the subproject, it was performed a survey on the activities performed by the PIBID’s scholars, since its implementation on campus in 2010 until the end of the year 2013, in order to map the experiences lived by program participants. These data were obtained from the analysis of reports by scholars themselves, video analyzes and record of the weekly meetings held by the group, reading electronic messages exchanged on a specific group of e-mails and written evaluations by members of the program. Completing data collection, eleven scholars undergraduates of the program were interviewed, and the results were classified by topics, defined from recurrence in the interviewees speech. The global analysis of the data was based on theoretical references commonly used in research on graduation of teachers, as Nóvoa (1992), Mizukami (2005, 2006) and Gatti (2008). The results indicate that the licensed ones see in PIBID a differentiated opportunity for initial teaching graduation, for adding practical learning experiences for students of EB within the school context, and especially for creating space for reflection on their experiences with the support of more experienced teachers, committed to the training of all involved ones

Estudo da utilização do balanced scorecard na gestão da qualidade e excelência operacional aplicadas a projetos de engenharia em sistemas de potência

The expansion of the electrical system is currently a subject of great importance to the development of Brazil. For its realization, large projects are needed, requiring large-scale investment and realization processes of great complexity. Thus, this type of project has a high strategic importance for the performance of companies that conduct. Seeking a way to determine a method to align traditional practices for measuring quality to the corporate strategic needs, this work is the study of the use of the balanced scorecard methodology, applying quality management and operational excellence, with a focus on projects in power systems. We analyzed some cases of successful application of the methodology in business segments in the next study, culminating in a proposed model of the method

Bancos de capacitores se corrente de Inrush

This work discusses about the effects and methods of control and elimination of the currents transients generated by switching capacitor banks, this currents are called inrush currents. Capacitor banks are widely used to compensate a low power factor generated by the widespread use of inductive loads. Currently many of these banks are automatic and therefore the capacitive cells are connected and disconnected according to the inductive loads on the network. However when connecting a capacitor bank to a bus can generate currents transients generated by electromagnetic transients. Aspects of the network, for example, the existence of a bank already connected to the bus, can influence the intensity of this phenomenon. This paper discusses some characteristics of the capacitors and the network to justify and explain the appearance of these transients and discusses its effects on the network and to other equipment. It is concluded that the main cause of this phenomenon is the voltage difference between the capacitor to be connected to the network and the bus, the results of the study were the bases to discuss the traditional methods to mitigate these currents and therefore its negative effects. Although in this paper is yet developed a method of electronic switching that can greatly reduce these transients

Criação de novo procedimento de engenharia que possibilite a rastreabilidade das tubulações de uma indústria química

The number of piping in an industry is high. Through this piping are conducted several kind of products at several temperature and pressure conditions. In a chemical company, the piping quantity conducting harmful chemical products to human health and to the environment is higher. Nowadays the theme sustainability is often mentioned and harm to environment may cause irreversible damage to the human being, to the fauna, to the flora and to company´s credibility. In this context, controlling over the piping to avoid accidents is mandatory. The objective of this monograph is to create a procedure which enables the chemical companies piping traceability. This monograph analyses the several existent traceability system in the three economy sectors and approaches the technical question of industrial piping in order to create a procedure that achieves its objectives as a technical document and at the same time be economically feasible, with low complexibility level and high practicability. Some possibilities to elaborate this procedure had been studied, as the creation of an alphanumeric code and making with a chisel in the pipeline based on ASTM F2897 and the use of chips to store the information. However, the procedure which best meet the requirement as low cost and high applicability is filling out an electronic plan with information about welding process, welding certification, welding consumables and inspections

Análise geoestatística da variabilidade espacial do acabamento com tingidor em painéis de madeira colada lateralmente

Classical statistical techniques which necessarily assume that all sampling units are random and independent were always used in the timber industry. Geostatistics considers that certain phenomena are characterized by spatial dependence: values of sampling units closer to each other tend to be more similar than values of sampling units farther away. This study aimed to characterize the spatial variability of the finishing (dyer) in the upper and lower surfaces of four edge glued panels by using geostatistical methods using geoR. Semivariograms were constructed for the analysis of spatial dependence. The spherical mathematical model was the best fit to the semivariograms generated, and was done the interpolation of the data (kriging) in samples where the distribution of dyer presents spatial dependence. In the bottom surfaces of two panels where the spatial dependence was detected geostatistical methods characterized a very large spatial variability due to the heterogeneous application of the finishing

Os segredos que a natureza encerra: uso de conceitos e modelos da física para investigar questões do mundo animal

Physics governs all working patterns of the universe and could not be otherwise in a biological environment. Living things depend directly on laws and physical models to compose their body structure, allow its survival in certain environments, communication between individuals and groups and also to establish a complex sensorial system that allows interaction with the environment that surrounds them. With the advancement of science and technology, new ideas are required, and thus, many researchers began to turn their attention to those systems found in nature, as these systems often present practical solutions and with maximum efficiency. This imitation of biological systems, applied in creating innovative technological resources, is called Biomimetics. To study the biological systems based on physical concepts is essential the creation of models. These allow the distinction of the effects of the issue really essential and may be ignored side effects that do not have an effective participation in the phenomenon being analyzed. In this Work Completion of course will be studied the phenomenon of countercurrent heat exchangers, present in various situations of nature, focusing on their participation in the legs of birds, also the balance of certain birds that are supported on one leg and possible inspiration of these phenomena in the fields of engineering. Also included are videos that allow better understanding of the studied subjects

Valoração ambiental: síntese dos principais métodos

This study aims to show some methods of environmental assets valuation. These methods are intended to assist in the economic value estimation to environmental resources by the simulation of a hypothetical market, even if there are no market prices related to them. It is about an individual preference measure against the environmental changes. Thus, the environmental valuation methods do not convert a natural resource into a market product. The present report evaluates the applicability of the valuation methods to determine the economic value for assets or resources. The challenge for all is to understand the current economic and ecologic thinking and their limitations, so as to seek improvements in the perception of natural phenomena and in the economic-oriented goal, which is the sustainable development.

Análise da implantação do TPM em uma empresa do ramo farmacêutico

Through observation of the production process industries today, one can encounter the needs of the large uncertainties related improvements and changes in the production environment, a fact that inspired the search for solutions that can respond quickly to these changes. Thus, this paper describes the review of implementation of TPM (total productivity management), which aims to optimize two distinct processes in the Vale do Paraíba´s pharmaceutical industry one of through the pillar of specific improvement. The main objective is to propose an efficient alternative to proposing loss management processes by identifying and eliminating the same in a systematic process. To develop this analysis was necessary to explore concepts of TPM and tools that help in taking data, identification and clarification of the phenomena that cause failures in the process, which were essential to ensure the development of the analysis. The concepts covered are usually presented during an undergraduate degree in Engineering. Data compiled by the analysis are able to serve as a strategic benchmark for decision making by managers, providing alternative response variables and uncertainty of the organizational environment, a fact that facilitates the management of human resources and productive

Análise dos fatores de desempenho do ENADE: estudo parao curso de engenharia de produção mecânica

This work has the propose to discuss the National Examination Performance of students for the course in Production Engineering , from 2005 up to 2011, subsidies are shown how this came about assessment and how the course has been evaluated in recent years . Compares higher education from public and private universities in Brazil and is also discussed how important a good performance in the exam. Qualitative and quantitative surveys were conducted at different times that the work that enables a critical analysis of the examination , the institution and also the students themselves , so the list is the main motivators for the exam and also what should be done to obtaining good results in academic performance. Motivators for the exam has highlighted its importance is paramount and the consent of all involved from the beginning of the course to ensure that the examination is compulsory for all graduates of undergraduate manufacturing engineering in Brazil

Viabilidade técnica e econômica na utilização de um sistema fotovoltaico para alimentação de luminárias LED na Faculdade de Engenharia do Campus de Guaratinguetá SP

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable way is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. This academic work aims to bring a possible alternative to reduce the consumption of eletrical energy, at the University of Engineering – Campus of Guaratinguetá, through the use of a photovoltaic system interconnected to the LED bulbs. For this, the necessary data for the design of the photovoltaic system componentes and their acquisition costs were obtained and three differents configurations were developed to choose the one that bests fits the studied case, considering the return time of the initial investment (payback)

Analise dos trabalhos de conclusão do curso de engenharia de produção da UNESP de Guaratinguetá

This work is quantified according to the ABEPRO areas, the number of works the Course Conclusion (TCCs) and Hours (CH) Course of Production Engineering, UNESP Guaratinguetá. Based on this quantification were found to be significant discrepancies between the TCCs and CH. Quality and Logistics observed for the larger discrepancies, with 26% and 17% of the number of TCCs, respectively. Both areas have only 6% of the time. They are also used data from researchers at the National Council of Scientific and Technological Development (CNPq) in the areas of Production Engineering. In the area of Quality and Logistics, the researchers account for 8% and 5%, respectively, but are most prominent researchers in the field of Operations Research, with 37%. However, this view can help the department to organize the curriculum, with the development of teaching projects, methods and means of education, and visibility to help future hiring for the department