Paternidade: um estudo psicanalítico sobre pesquisas desenvolvidas no contexto brasileiro

Pós-graduação em Psicologia - FCLAS

Métodos de estudo da transmissão neuromuscular

Este trabalho tem como objetivo documentar as atividades realizadas no Estágio Curricular Obrigatório do curso de Graduação em Física Médica, realizado no Laboratório de Farmacologia da Junção Neuromuscular do Departamento de Farmacologia do Instituto de Biociências da UNESP de Botucatu. O estágio englobou atividades relacionadas à Instrumentação e à Iniciação Científica, ambas visando ao estudo da Farmacologia da Transmissão Neuromuscular. Desta forma, neste relatório serão apresentados, inicialmente, uma breve revisão dos aspectos fundamentais da morfologia e da fisiologia da junção neuromuscular. Posteriormente, serão descritos os métodos de estudo da transmissão neuromuscular aprendidos no decorrer do estágio, especificamente, as técnicas miográfica, que permite o registro da contração muscular, e eletrofisiológica, que possibilita o registro de atividade elétrica celular, ambas in vitro. Finalizando, serão apresentados os resultados do Projeto de Iniciação Científica desenvolvido, cujo objetivo foi estudar a ação do extrato etanólico da planta Tabernaemontana catharinensis sobre o bloqueio neuromuscular induzido por toxinas ofídicas na preparação do nervo frênico-músculo diafragma isolado de camundongos

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Aplicação de métodos computacionais no estudo das fases intermetálicas ordenadas pt-sn

Fuel cells are a very promising solution to the problems of power generation and emission of pollutant to the environment, excellent to be used in stationary application and mobile application too. The high cost of production of these devices, mainly due to the use of noble metals as anode, is a major obstacle to massive production and deployment of this technology, however the use of intermetallic phases of platinum combined with other metals less noble has been evaluated as electrodes in order to minimize production costs and still being able to significantly improve the catalytic performance of the anode. The study of intermetallic phases, exclusively done by experimental techniques is not complete and demand that other methods need to be applied to a deeper understanding of the behavior geometric properties and the electronic structure of the material, to this end the use of computer simulation methods, which have proved appropriate for a broader understanding of the geometric and electronic properties of the materials involved, so far not so well understood.. The use of computational methods provides answers to explain the behavior of the materials and allows assessing whether the intermetallic may be a good electrode. In this research project was used the Quantum-ESPRESSO package, based on the DFT theory, which provides the self-consistent field calculations with great precision, calculations of the periodic systems interatomic force, and other post-processing calculations that points to a knowledge of the geometric and electronic properties of materials, which may be related to other properties of them, even the electrocatalytic. The electronic structure is determined from the optimized geometric structure of materials by analyzing the density of states (DOS) projected onto atomic orbital, which determines the influence of the electrocatalytic properties of the material... (Complete abstract click electronic access below)

Estudo da anatomia interna dos incisivos laterais superiores pelos métodos radiográficos digital e convencional

The maxillary lateral incisor has a very peculiar and internal morphology that can be influenced by the its external anatomy such as supernumerary roots and ruts deep root, which often hinders an effective endodontic treatment. Generally, this tooth have a single root with one root canal, but teeth with two to four channels can be found. The main canal can present ramifications such as accessory canals, laterals, collaterals, recorrents and apical deltas. All this factors interfere directally on endodonthics treatment. The objective of this work is a study of the internal anatomy of the maxillary lateral incisors by digital and conventional radiographics methods, comparing the results obteined by each method Six hundred upper lateral incisor were used in this study teeth of the collection of the Department of Anatomy ICT – UNESP. All the teeth were radiographed by vestibular face, using a digital radiographic unit(Dabi Atlante). After this step, all the teeth underwent by conventional radiographic technique(Kodak 2200) so that the results obtained were compared. To classify the channel system, it was adopted the classification of Pucci and Reig. All data obtained by digital technique were compared with those obtained in the conventional technique and were subjected to statistical analysis

Estudo das interações entre proteína NS1 do hRSV e flavonóides utilizando métodos biofísicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de tempos e temperaturas de sinterização na obtenção da liga NiTi por metalurgia do pó

The nickel-titanium alloys are very attractive and so it is widely used in industry, engineering applications in general and also in biomedical and dental applications. Besides showing the shape of memory effect, biocompatibility and superelastic, the alloy commercially known as Nitinol, has excellent mechanical properties. Most devices used in Brazil have been produced nationally, but using imported material is also necessary, which shows the need of produce the alloy nationally. In this study we have investigated the influence of sintering temperatures and times to obtain nickel-titanium alloys by powder metallurgy alloys and the characterization of the precipitated intermetallic phases by using the post-mix of elemental nickel and titanium in proportion of 49.5% Ti - 50.5% Ni. The samples were sintered at 930ºC for periods of 30, 40 and 50 hours and were characterized by optical microscopy using metallography and x-ray diffraction. The results of the study show that the 50 hours sintering time was the most suitable time for obtaining the alloy, observing a low volume of precipitated intermetallic phases and absence of Ni and Ti residuals

Estudo e aplicação de diferentes métodos de resolução para problemas dinâmicos não-lineares em presença de atrito

The friction phenomena is present in mechanical systems with two surfaces that are in contact, which can cause serious damage to structures. Your understanding in many dynamic problems became the target of research due to its nonlinear behavior. It is necessary to know and thoroughly study each existing friction model found in the literature and nonlinear methods to define what will be the most appropriate to the problem in question. One of the most famous friction model is the Coulomb Friction, which is considered in the studied problems in the French research center Laboratoire de Mécanique des Structures et des Systèmes Couplés (LMSSC), where this search began. Regarding the resolution methods, the Harmonic Balance Method is generally used. To expand the knowledge about the friction models and the nonlinear methods, a study was carried out to identify and study potential methodologies that can be applied in the existing research lines in LMSSC and then obtain better final results. The identified friction models are divided into static and dynamic. Static models can be Classical Models, Karnopp Model and Armstrong Model. The dynamic models are Dahl Model, Bliman and Sorine Model and LuGre Model. Concerning about nonlinear methods, we study the Temporal Methods and Approximate Methods. The friction models analyzed with the help of Matlab software are verified from studies in the literature demonstrating the effectiveness of the developed programming

Estudo clínico longitudinal de dentes restaurados com sistemas cerâmicos livres de metal: estudo prospectivo sobre a hipersensibilidade dental pós-operatória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo comparativo entre ressecção e eletrocoagulação endometrial em paciebtes com sangramento uterino anormal

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Estudo microbiológico comparativo entre sabão de clorexidina 2% e um novo sabão antisséptico para lavagem pré-operatória das mãos

Objective: To evaluate, by means of a microbiologic study, two kinds of soaps suggested by surgeons for presurgical handwashing, comparing a well-known antibacterial soap with a new soap formulated from vegetable oils. Materials and methods: Ten volunteers performed handwashing according to previously established protocols for routine antisepsis in operating rooms using 3 different soaps: a common, commercially marketed soap, serving as the control group (Group 1), with no antibacterial characteristics; a soap with 2% chlorhexidine (Group II); and a new soap formulated from vegetable oils at a concentration of 20%, known as surfactant, which was designed by the Chemistry Institute (Unesp/Araraquara – Grupo de Materiais Fotônicos) (Group III). The microbiological samples were collected immediately before and after handwashing and one hour later with the volunteer wearing surgical gloves. Results: ANOVA revealed that the following significant differences are found in the number of bacterial colonies: between soap types (a smaller number of colonies in the Group II soap), between periods (reduction in the number of colonies in the Group II soap), and the significant effect of the soap versus time interaction. Conclusion: The 2% chlorhexidine soap performed better in reducing the number of bacterial colonies on the hands immediately after handwashing and after one hour with the use of surgical gloves, when compared to the 20% surfactant soap.

Métodos preventivos em primeiro molar permanente de crianças com experiência de cárie dentária: estudo clínico comparativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cães American Pit Bull Terrier submetidos a exercício: respostas fisiológicas e estudo comparativo de métodos para quantificação de lactato

Pós-graduação em Medicina Veterinária - FCAV

Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubri-refrigeração

Pós-graduação em Engenharia Mecânica - FEB

Estudo de materiais supercondutores em forma de SQUID com uma constrição usando métodos de paralelização computacional

Pós-graduação em Ciência e Tecnologia de Materiais - FC