Linhagem materna: Qual a sua influência em características pré e pós desmama em bovinos da raça Nelore?

The present work had as objective to evaluate the effects of the introduction of the maternal lineage (Lc), representing the mitochondrial inheritance, in the model of genetic evaluation on birth weight (BW), weight for 120 days (W120), weaning weight (WW), weight at 12 month (W12), weight at 18 month (W18), weight gain from weaning to 18 month (WG18), scrotal perimeter (SP) and temperament (TEMP) of a Brazilian Nelore herd. Two models had been used for raise a comparison among of estimates the (co)variances components and genetic parameter, been the first equal one to currently used in the genetic evaluations of this herd, and second included the random effect of maternal lineage. Amongst the analyzed characteristics, the maternal lineage effect was significant (P<0.05) for W18 and SP only it, where this effect was responsible for 3% and 7%, respectively, of phenotypic variance could be explained by Lc effect. For besides characteristics, however not significant, this effect was responsible for 1% and 9% of phenotypic variance.

Coupling rate measurement of a novel multi-actuated piezoelectric device using optical interferometry

The class of piezoelectric actuators considered in this paper consists of a multi-flexible structure actuated by two or more piezoceramic devices that must generate different output displacements and forces at different specified points of the domain and in different directions. The devices were modeled by finite element using the software ANSYS and the topology optimization method. The following XY actuators were build to achieve maximum displacement in the X and Y directions with a minimum crosstalk between them. The actuator prototypes are composed of an aluminum structure, manufactured by using a wire Electrical Discharge Machining, which are bonded to rectangular PZT5A piezoceramic blocks by using epoxy resin. Multi-actuator piezoelectric device displacements can be measured by using optical interferometry, since it allows dynamic measurements in the kHz range, which is of the order of the first resonance frequency of these piezomechanisms. A Michelson-type interferometer, with a He-Ne laser source, is used to measure the displacement amplitudes in nanometric range. A new optical phase demodulation technique is applied, based on the properties of the triangular waveform drive voltage applied to the XY piezoelectric nanopositioner. This is a low-phase-modulation-depth-like technique that allows the rapid interferometer auto-calibration. The measurements were performed at 100 Hz frequency, and revealed that the device is linear voltage range utilized in this work. The ratio between the generated and coupled output displacements and the drive voltages is equal to 10.97 nm/V and 1.76 nm/V, respectively, which corresponds to a 16% coupling rate. © 2010 IEEE.

Cutting performance of diamond coated Si3N4 tool during turning

Silicon nitride cutting tools have been used successfully for machining hard materials, like: cast irons, nickel based alloys, etc. However these cutting tools with diamond coating present little information on dry turning operations of gray cast iron. In the present work, Si3N4 square inserts was developed, characterized and subsequently coated with diamond for dry machining operations on gray cast iron. All experiments were conducted with replica. It was used a 1500, 3000, 4500 m cutting length, feed rate of 0.33 mm/rev and keeping the depth of cut constant and equal to 1 mm. The results show that wear in the tool tips of the Si3N4 inserts, in all cutting conditions, was caused by both mechanical and chemical processes. To understand the tool wear mechanisms, a morphological analysis of the inserts, after experiments, has been performed by SEM and optical microscopy. Diamond coated PVD inserts showed to be capable to reach large cutting lengths when machining gray cast iron. © (2010) Trans Tech Publications.

Utilização de água residuária do processo pós-colheita do café na produção de mudas de cafeeiro

Intending to achieve better results on coffee production, the coffee producers began, since the 80s, to process the coffee postharvest, in order to ensure product's superior quality. However, with the processing, other problem appeared, the contamination of rivers, creeks, soil and water table from coffee wastewater (ARC). This paper had as main objective to use the ARC on the coffee plants' production verifying its viability and if the ARC is able to supply the coffee potassium requirements when they don't receive potassium chloride in the organic compound. The work was developed at Faculdade de Ciências Agronômicas - UNESP, Botucatu-SP, in a greenhouse located at Departamento de Engenharia Rural. The work consisted of 10 treatments on a 5×2 factorial (5 wastewater proportions of coffee after the harvest processing - 0%, 25%, 50%, 75% and 100% - and potassium chloride presence or absence in the composition), with 4 repetitions with a completely randomized statistical design. The ARC was applied each 48 hours in an irrigation depth of 10 mm. After 6 months, the plants' vegetative characteristic had been evaluated as well the chemical characteristics of the compound and of the plants. We observed that the treatments with potassium chloride presence showed worse vegetative characteristics compared with treatments which did not have KCl in its composition. Moreover, with the increase of the wastewater dosage, it happened a decrease in the vegetative characteristics, however an addition in the chemical characteristics of the compound. Also, the treatments without KCl presence and with 0% and 25% of coffee wastewater had been statistically equal, showing the viability in the use of the ARC in the production of coffee plants, since the compound does not contain KCl and that the water used in the composition is a mixture of 25% of ARC with 75% of common water.

Simulation of the flow through automatic valves of hermetic compressors by the immersed boundary method approach

The main goal of the present work is to verify the applicability of the Immersed Boundary Method together with the Virtual Physical Model to solve the flow through automatic valves of hermetic compressors. The valve was simplified to a two-dimensional radial diffuser, with diameter ratio of D/d = 1.5, and simulated for a one cycle of opening and closing process with a imposed velocity of 3.0 cm/s for the reed, dimensionless gap between disks in the range of 0.07 < s/d < 0.10, and inlet Reynolds number equal to 1500. The good results obtained showed that the methodology has great potential as project tool for this type of valve systems. © The Authors, 2011.

Dermatoglyphics in sports sciences: Understanding the distribution of quantitative indicators in non-athletes and athletes of basketball according to their performance

Objectives. One of the concerns of Sports Sciences is the search for methodologies that can help discover potential athletes. In this sense, some initiatives have been taken in an attempt to identify and characterize the genetic profile of dermatoglyphic marks (fingerprints). The present work has the objective of understanding the distribution of quantitative dermatoglyphic indicators in basketball players with different levels of performance compared to non-players. Methods. The subjects observed constituted 125 individuals, divided into five numerically equal groups, three of which were composed of professional basketball players according to their level of participation (Brazilian Team, National Championship and São Paulo Championship) and the last two formed by weekend players and non-players, respectively. Eleven dermatoglyphic variables were analysed in the descriptive level by means of measurement of position, variability and limits of confidence of the median, and, in inferential terms, the Kruskal-Wallis statistical test was adopted. Results. The more expressive ones were: TRC, counting lines a-b and A'-d, behave differently between athletes and non-athletes. Conclusion. Studies about this kind of analysis should be continued, calling on resources that take into consideration all variables simultaneously as a multivariate study. © 2012 Revista Andaluza de Medicina del Deporte.

Side-effects of thiamethoxam on the brain andmidgut of the africanized honeybee Apis mellifera (Hymenopptera: Apidae)

The development of agricultural activities coincides with the increased use of pesticides to control pests, which can also be harmful to nontarget insects such as bees. Thus, the goal of this work was assess the toxic effects of thiamethoxam on newly emerged worker bees of Apis mellifera (africanized honeybee-AHB). Initially, we determined that the lethal concentration 50 (LC50) of thiamethoxam was 4.28 ng a.i./μL of diet. To determine the lethal time 50 (LT50), a survival assay was conducted using diets containing sublethal doses of thiamethoxam equal to 1/10 and 1/100 of the LC50. The group of bees exposed to 1/10 of the LC50 had a 41.2% reduction of lifespan. When AHB samples were analyzed by morphological technique we found the presence of condensed cells in the mushroom bodies and optical lobes in exposed honeybees. Through Xylidine Ponceau technique, we found cells which stained more intensely in groups exposed to thiamethoxam. The digestive and regenerative cells of the midgut from exposed bees also showed morphological and histochemical alterations, like cytoplasm vacuolization, increased apocrine secretion and increased cell elimination. Thus, intoxication with a sublethal doses of thiamethoxam can cause impairment in the brain and midgut of AHB and contribute to the honeybee lifespan reduction. © 2013 Wiley Periodicals, Inc.

Haemonchus contortus: A multiple-resistant Brazilian isolate and the costs for its characterization and maintenance for research use

The aim of this work was to determine the resistance level of Haemonchus contortus isolated from the Santa Inês flock of the Embrapa (Brazilian government's Agricultural Research Company), Southeast Livestock Unit (CPPSE), as well as to determine costs of characterizing and maintaining this isolate in host donors. Forty-two male Santa Inês lambs were experimentally infected with 4000 H. contortus infective larvae of the field isolate of CPPSE, called Embrapa2010, and divided into six treatment groups, which received triclorfon, albendazol plus cobalt sulfate, ivermectin, moxidectin, closantel and levamisole phosphate, as well as a negative control group (water). Egg per gram (EPG) counts were performed at 0, 3, 7, 10 and 14. days post treatment when the animals were slaughtered for parasite count. The data were analyzed using the RESO statistical program, considering anthelmintic resistance under 95% of efficacy. EPG and worm count presented a linear and significant relation with 94% determination coefficient. The susceptibility results obtained by RESO through both criteria (EPG and worm count) were equal, except for closantel, showing that the isolate Embrapa2010 is resistant to benzimidazoles, macrocyclic lactones and imidazothiazoles. The need of a control group did not appear to be essential since the result for susceptibility in the analyses with or without this group was the same. Suppression in egg production after treatment did not occur in the ivermectin and moxidectin groups. In the control group, the establishment percentage was just 12.5 because of the low number of third-stage larvae, resistance (innate and infection immunity) of the animals studied plus good nutrition. Drug classes presented similar efficacy between adults and immature stages. The costs for isolate characterization were calculated for 42 animals during 60. days. The total cost based on local market rates was approximately US$ 8000. The precise identification of Brazilian isolates and their establishment in host donors would be useful for laboratorial anthelmintic resistance diagnoses through in vitro tests, which has an annual cost of approximately US$ 2500 for maintenance in host donors. © 2012 Elsevier B.V.

Stable regions around Pluto

In a previous work, GiuliattiWinter et al. found several stable regions for test particles in orbit around Pluto associated with families of periodic orbits obtained in the circular, restricted three-body problem. They have shown that a possible eccentricity of the Pluto-Charon binary slightly reduces but does not destroy any of these stable regions. In thiswork, we extended their results by analysing the cases with the orbital inclination (I) equal to zero and considering the argument of pericentre (w) equal to 90°, 180° and 270°. We explore the influence of the orbital inclination of the particles in these stable regions. In this case, the initial inclination varies from 10° to 170° in steps of 10°. We also present a sample of results for the longitude of the ascending node Ω = 90°, considering the cases I = 20°, 50°, 130° and 180°. Our results show that stable regions are present in all of the inclined cases, except when the initial inclination of the particles is equal to 110°. A sample of 3D trajectories of quasi-periodic orbits were found related to the periodic orbits obtained in the planar case by Giuliatti Winter et al. © 2013 The Authors. Published by Oxford University Press on behalf of the Royal Astronomical Society.

Degradation of dipyrone via advanced oxidation processes using a cerium nanostructured electrocatalyst material

This work studied the degradation of dipyrone, via electrochemical processes and via electro-Fenton reaction using a 4% CeO2/C gas diffusion electrode (GDE) prepared via modified polymeric precursor method. This material was used to electrochemically generate H2O2 through oxygen reduction. The mean crystallite sizes estimated by the Scherrer equation for 4% CeO2/C were 4 nm for CeO2-x (0 4 4) and 5 nm for CeO2 (1 1 1) while using transmission electron microscopy (TEM) the mean nanoparticle size was 5.4 nm. X-ray photoelectron spectroscopy (XPS) measurements revealed nearly equal concentrations of Ce(III) and Ce(IV) species on carbon, which contained high oxygenated acid species like CO and OCO. Electrochemical degradation using Vulcan XC 72R carbon showed that the dipyrone was not removed during the two hour electrolysis in all applied potentials by electro-degradation. Besides, when the Fenton process was employed the degradation was much similar when using cerium catalysts but the mineralization reaches just to 50% at -1.1 V. However, using the CeO2/C GDE, in 20 min all of the dipyrone was degraded with 26% mineralization at -1.3 V and when the Fenton process was employed, all of the dipyrone was removed after 5 min with 57% mineralization at -1.1 V. Relative to Vulcan XC72R, ceria acts as an oxygen buffer leading to an increase in the local oxygen concentration, facilitating H2O2 formation and consequently improving the dipyrone degradation © 2013 Elsevier B.V. All rights reserved.

Determinação das características agronômicas, dos distúrbios fisiológicos, do estado nutricional da planta e da qualidade dos tubérculos em cultivares de batata (Solanum tuberosum L.)

Pós-graduação em Agronomia (Agricultura) - FCA

O político, o jurídico e o assistencial no discurso administrativo sobre a mulher

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento embrionário e larval de Brycon gouldingi (Teleostei, Characidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Projeto de uma referência de tensão com baixa susceptibilidade a interferência eletromagnética (EMI)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características dos parâmetros do condutor equivalente a um feixe de subcondutores de linhas de transmissão: análise inicial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)