Avaliação da remoção de sedimentos pela operação de nivelamento de estradas florestais

The forest roads construction inevitably causes environmental impacts to adjacent ecosystems and streams. Also the routine activities of roads maintenance may similarly cause environmental impacts of about the same magnitude. The material scraped from the roadway by the motor grader is usually distributed along the roadsides, from where it may easily be washed out toward the streams. Therefore, quantifying the amount of sediments removed during road maintenance activities may provide important information of this stream sedimentation potential. For this purpose, three forest roads were divided in 30 m long segments, marked with leveled stakes. A nylon thread was then stretched across the leveled stakes and the distance from the nylon thread to the road surface was measured before and after the mechanical scraping of the road. The average removal of sediments was of 2,13 cm. Considering the mean density of soil 1,6 g cm -3, the average removal of sediments was of 341 t ha -1 of road. Considering still a 3,9 m wide and 150 m long road as an example, the total amount of removed sediments would be around 19,9 t. Road maintenance, therefore, must be well planned in order to avoid or minimize stream sedimentation.

A preliminary physicochemical, exergetic and economic study of hydrogen production utilizing glycerol

This work has as objective to demonstrate technical and economic viability of hydrogen production utilizing glycerol. The volume of this substance, which was initially produced by synthetic ways (from oil-derived products), has increased dramatically due mainly to biodiesel production through transesterification process which has glycerol as main residue. The surplus amount of glycerol has been generally utilized to feed poultry or as fuel in boilers, beyond other applications such as production of soaps, chemical products for food industry, explosives, and others. The difficulty to allocate this additional amount of glycerol has become it in an enormous environment problem, in contrary to the objective of biodiesel chain, which is to diminish environmental impact substituting oil and its derivatives, which release more emissions than biofuels, do not contribute to CO2-cycle and are not renewable sources. Beyond to utilize glycerol in combustion processes, this material could be utilized for hydrogen production. However, a small quantity of works (theoretical and experimental) and reports concerning this theme could be encountered. Firstly, the produced glycerol must be purified since non-reacted amounts of materials, inclusively catalysts, contribute to deactivate catalysts utilized in hydrogen production processes. The volume of non-reacted reactants and non-utilized catalysts during transesterification process could be reutilized. Various technologies of thermochemical generation of hydrogen that utilizes glycerol (and other fuels) were evaluated and the greatest performances and their conditions are encountered as soon as the most efficient technology of hydrogen production. Firstly, a physicochemical analysis must be performed. This step has as objective to evaluate the necessary amount of reactants to produce a determined volume of hydrogen and determine thermodynamic conditions (such as temperature and pressure) where the major performances of hydrogen production could be encountered. The calculations are based on the process where advance degrees are found and hence, fractions of products (especially hydrogen, however, CO2, CO, CH4 and solid carbon could be also encountered) are calculated. To produce 1 Nm3/h of gaseous hydrogen (necessary for a PEMFC - Proton Exchange Membrane Fuel Cell - containing an electric efficiency of about 40%, to generate 1 kWh), 0,558 kg/h of glycerol is necessary in global steam reforming, 0,978 kg/h of glycerol in partial oxidation and cracking processes, and 0,782 kg/h of glycerol in autothermal reforming process. The dry reforming process could not be performed to produce hydrogen utilizing glycerol, in contrary to the utilization of methane, ethanol, and other hydrocarbons. In this study, steam reforming process was preferred due mainly to higher efficiencies of production and the need of minor amount of glycerol as cited above. In the global steam reforming of glycerine, for one mole of glycerol, three moles of water are necessary to produce three moles of CO2 and seven moles of H2. The response reactions process was utilized to predict steam reforming process more accurately. In this mean, the production of solid carbon, CO, and CH4, beyond CO2 and hydrogen was predicted. However, traces of acetaldehyde (C2H2), ethylene (C2H4), ethylene glycol, acetone, and others were encountered in some experimental studies. The rates of determined products obviously depend on the adopted catalysts (and its physical and chemical properties) and thermodynamic conditions of hydrogen production. Eight reactions of steam reforming and cracking were predicted considering only the determined products. In the case of steam reforming at 600°C, the advance degree of this reactor could attain its maximum value, i.e., overall volume of reactants could be obtained whether this reaction is maintained at 1 atm. As soon as temperature of this reaction increases the advance degree also increase, in contrary to the pressure, where advance degree decrease as soon as pressure increase. The fact of temperature of reforming is relatively small, lower costs of installation could be attained, especially cheaper thermocouples and smaller amount of thermo insulators and materials for its assembling. Utilizing the response reactions process in steam reforming, the predicted volumes of products, for the production of 1 Nm3/h of H2 and thermodynamic conditions as cited previously, were 0,264 kg/h of CO (13% of molar fraction of reaction products), 0,038 kg/h of CH4 (3% of molar fraction), 0,028 kg/h of C (3% of molar fraction), and 0,623 kg/h of CO2 (20% of molar fraction). Through process of water-gas shift reactions (WGSR) an additional amount of hydrogen could be produced utilizing mainly the volumes of produced CO and CH4. The overall results (steam reforming plus WGSR) could be similar to global steam reforming. An attention must to be taking into account due to the possibility to produce an additional amount of CH4 (through methanation process) and solid carbon (through Boudouard process). The production of solid carbon must to be avoided because this reactant diminishes (filling the pores) and even deactivate active area of catalysts. To avoid solid carbon production, an additional amount of water is suggested. This method could be also utilized to diminish the volume of CO (through WGSR process) since this product is prejudicial for the activity of low temperature fuel cells (such as PEMFC). In some works, more three or even six moles of water are suggested. A net energy balance of studied hydrogen production processes (at 1 atm only) was developed. In this balance, low heat value of reactant and products and utilized energy for the process (heat supply) were cited. In the case of steam reforming utilizing response reactions, global steam reforming, and cracking processes, the maximum net energy was detected at 700°C. Partial oxidation and autothermal reforming obtained negative net energy in all cited temperatures despite to be exothermic reactions. For global steam reforming, the major value was 114 kJ/h. In the case of steam reforming, the highest value of net energy was detected in this temperature (-170 kJ/h). The major values were detected in the cracking process (up to 2586 kJ/h). The exergetic analysis has as objective, associated with physicochemical analysis, to determine conditions where reactions could be performed at higher efficiencies with lower losses. This study was performed through calculations of exergetic and rational efficiencies, and irreversibilities. In this analysis, as in the previously performed physicochemical analysis, conditions such as temperature of 600°C and pressure of 1 atm for global steam reforming process were suggested due to lower irreversibility and higher efficiencies. Subsequently, higher irreversibilities and lower efficiencies were detected in autothermal reforming, partial oxidation and cracking process. Comparing global reaction of steam reforming with more-accurate steam reforming, it was verified that efficiencies were diminished and irreversibilities were increased. These results could be altered with introduction of WGSR process. An economic analysis could be performed to evaluate the cost of generated hydrogen and determine means to diminish the costs. This analysis suggests an annual period of operation between 5000-7000 hours, interest rates of up to 20% per annum (considering Brazilian conditions), and pay-back of up to 20 years. Another considerations must to be take into account such as tariffs of utilized glycerol and electricity (to be utilized as heat source and (or) for own process as pumps, lamps, valves, and other devices), installation (estimated as US$ 15.000 for a plant of 1 Nm3/h) and maintenance cost. The adoption of emission trading schemes such as carbon credits could be performed since this is a process with potential of mitigates environment impact. Not considering credit carbons, the minor cost of calculated H2 was 0,16288 US$/kWh if glycerol is also utilized as heat sources and 0,17677 US$/kWh if electricity is utilized as heat sources. The range of considered tariff of glycerol was 0-0,1 US$/kWh (taking as basis LHV of H2) and the tariff of electricity is US$ 0,0867 US$/kWh, with demand cost of 12,49 US$/kW. The costs of electricity were obtained by Companhia Bandeirante, localized in São Paulo State. The differences among costs of hydrogen production utilizing glycerol and electricity as heat source was in a range between 0,3-5,8%. This technology in this moment is not mature. However, it allows the employment generation with the additional utilization of glycerol, especially with plants associated with biodiesel plants. The produced hydrogen and electricity could be utilized in own process, increasing its final performance.

Controle de erosão em estradas rurais não pavimentadas, utilizando sistema de terraceamento com gradiente associado a bacias de captação

The agricultural unpaved roads are important road structures for the economic and social agricultural development of the Nation, and the erosion provoked by rain water in the road bed and sides are closely related to bad draining, one of the main factors for their degradation. In order to make the draining system adequate, it is necessary to know about erodibility, infiltration capacity of water in the ground and adoption of mechanical slope abatement with grid elevation and water interception. This study presents drainage model through the construction of terraces with gradient transversally associated to the capitation basin in abruptic red dystrophic argisol soils, medium sandy texture, based on slops abatement techniques, elevating the road bed and deviating flow. The grain sized fractions of this ground (sand, silt, clay) and the aggregate stability indicated that this ground, under anthropic action, presents erosive processes resulting in superficial draining with ground hauling, sanding sources and courses of water situation below roads, providing great environmental impacts in the hydric bodies. The reduction of erosion problems in these unpaved roads is in the adoption of measures that intercept waters from the draining of their stream bed itself, as well as pluvial waters comings from adjacent areas of contribution, that are collected and conducted to inlaid terraces and capitation basis.

Avaliação preliminar do potencial turístico do município de rifaina (SP) e os impactos decorrentes do uso público de seus atrativos paisagísticos

This paper attempts to assess both the touristic potential of scenic attractions and the environmental impacts resulting from the public use of such attractions in the Rifaina Municipality, State of São Paulo, Southeastern Brazil. In the recent past, this municipality had its economy concentrated in rural activities (livestock, corn, rice and bean crops) and in the ceramic industry (production of bricks, tiles and shackles),which was largely developed in the floodplain of the Rio Grande before the construction of the Jaguara Power Plant Dam. The impacts resulting from touristic activities were evaluated by applying the VIM - Visitor Impact Management method, with emphasis on biophysical indicators. The main touristic attractions analyzed were: (1) Rifaina artificial beach; (2) Jaguara Reservoir; (3) Morro do Chapéu (scenic hill); (4) Touristic railroad; and (5) Cuestas cliffs. Attractions (1) and (2) are the most exploited ones, including, in the second case, nautical sports, sportive and craft fishing, and summer lodging. Although currently disabled, the touristic railroad presents potential conditions to be re-explored. Attractions (3) and (5), despite keeping high landscape and ecological ecotouristic potential, are the least visited places. In the present paper, a preliminary characterization of the major issues of tourism industry in the Rifaina municipality is made, including suggestions for the sustainable exploitation of tourism resources. The final results of the environmental impact evaluation of the tourism activities include small impacts in attractions (4) and (5) and moderate impacts to the three first attractions. In order to keep the sustainable touristic potential for that municipality this study proposes the improvement of the following measures: to foster research projects on technical or scientific aspects of the touristic attractions, improvement of tourism infrastructure and the creation of an Environmental Protection Area (APA) of the cuestas' scarps.

Impactos ambientais da mineração no estado de São Paulo

Generally, mining causes significant impact over the environment, since this activity often involves suppression of vegetation, soil exposure and erosion resulting in important changes in the quantity and quality of surface and ground-waters and in air pollution, among other negative effects. The prevention and mitigation of these impacts in the State of Sao Paulo are made through the environmental licensing. Another way of environmental management includes programs like mining and environmental zoning and regional mining director plans. But there is clear dissociation between the actions effectively taken and those recommended in the projects, limiting the recovery of degraded areas to measures that only attenuate the visual impact. this paper presents considerations on the subject and challenges of the industry to adapt to the Federal Constitution and the National Policy on Environment.

Enclaves fortificados e segregação urbana: o caso de Jundiaí

The article discusses the spread of closed condominiums in Jundiaí (SP). The studies about this phenomenon have predominantly focused on metropolitan areas; therefore, the relevance of research on medium-sized cities in order to identify similarities and differences among different urban scales. The main objective was to investigate the spacing phenomenon of closed condominiums as a housing pattern tendency as well as its social, urban and environmental impact. This study encloses the period from 1970 to the present.

Zoneamento do parque ecológico de ourinhos SP

The aim of this study was to carry out a zoning in the municipal ecological park of Ourinhos, SP, located southwest of São Paulo State, aiming to subsidize the planning and management of this area. With this purpose it was made an inventory of the landscape resources of this park with hypsometry, declivity, use of soil and zoning mappings. From this zoning, we analyzed the possibilities of implementing purposes of use, with the objective of preserving this area, minimizing the negative environmental impacts. Thus, this research was of extreme importance, since it allowed to identify and rank, in the territory, areas or sectors that are priority to the development of activities, as well as contribute to the conservation of natural and socio-cultural heritage.

Cultivation of Pleurotus ostreatus using supplemented spent oyster Mushroom substrate

Spent Agaricus and Pleurotus substrates are mainly used as components of amendments and growing substrates, but not in sufficient quantities to solve the problem of their accumulation in mushroom producing areas, where they represent a potential pollution risk. The mushroom growing sector in Spain generates about 5105 t of spent compost, while the EU, as a whole, produces more than 3.5106 t. Among alternative management applications, it is possible to reuse these wastes in the cultivation of mushrooms, as a casing material for growing Agaricus spp. and as substrate for growing other species. In this work, the application of commercial nutritional supplements (Calprozime, Champfood and Promycel), widely used in Agaricus cultivation, is evaluated for its possible use as additive to substrates, based on spent oyster mushroom substrate (SMS), for the cultivation of Pleurotus ostreatus. Using a mixture of straw and SMS (1:1, w/w) as base material, the addition of CaSO4 (50 g kg-1) and CaCO3 (10 g kg-1) and the above supplements at 20 g kg-1 brought about a remarkable increase in production compared with the substrate without any supplement. The biological efficiencies did not differ significantly from that obtained when a commercial substrate was used as control, reaching values of 48.9 kg/100 kg substrate (dry matter) when Calprozime was used as supplement. Sporophores harvested from the supplemented substrates presented a higher dry matter content than those obtained from both commercial and non-supplemented substrates. SMS is cheap and easily available; it can be integrated into new formulations with the added advantages of lowering production costs, limiting growers' dependence on straw, and decreasing the environmental impact of its ever-growing accumulation.

Cisalhamento na Linha de Cola de Compensados de Eucalyptus sp. e Adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being carried out with the intention to improve their properties, taking into account a lower environmental impact. To this end, new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no polluting harmful to health chemicals in their composition, in contrast to formaldehyde-based resins; which in turn are the most commonly used for wood panels production these days. This study tested three different formulations of PVA adhesives, with different pressing times and temperatures for the production of Eucalyptus sp. plywood, obtaining satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared to the urea-formaldehyde and phenol-formaldehyde panels found in the literature.

Development of a burner to measure biogas generation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sprawling and Urban transportation system: Impacts in the city of Londrina, Parana, Brazil

After nearly 80 years since the construction of its core, represented today by the city's central area, Londrina, located in the state of Parana, has the appearance of a new city but its features and trends of planning policies depict the bad examples of Brazilian cities. With a booming urban growth, from north to south of the county, the urban interstices represented by big voids in the middle of the city created speculation and the concept of an ideal city slowly disappeared. With a metropolitan appearance and, at the same time, with small town aspects, Londrina stands out as an automobile-oriented city, a fact that has impacted the livelihood of the population, generating environmental impacts for all social classes. This paper discusses how the form of occupation in Londrina, characterized by the sprawl phenomenon and its relation to car preference as a mode of transportation has generated urban environmental impacts. It was concluded that the choice of using cars in Londrina, as well in other medium-sized Brazilian cities studied by the comparative method, has increased and has generated bottlenecks in traffic. As a consequence, there is a constant expropriation of properties for widening roads and at the same time, the presence of various densities and urban voids that form an uneven urban space and an obstacle to efficient urban planning. © 2012 WIT Press.

Restoration of a degraded area using soil tillage systems in Campinas, São Paulo, Brazil

In Brazil the intensive agriculture use, mainly pasture, is the main cause of the presence of extensive areas of degraded lands. This study aimed to assess the impact of different soil management practices in a pasture degraded area used as garbage disposal. The experiment was performed at the Faculdade de Engenharia Agrícola, Universidade Estadual de Campinas - UNICAMP, in Campinas, state of São Paulo, Brazil, from 1990 to 1996. This area has undergone a process of recovery through removal of trash deposited on the surface, in 1985, levelling of soil, followed by application of limestone, subsoiling, planting of legumes (Crotalaria juncea) and crop rotation (soybean and maize). Since 1990 only popcorn maize was grown and established plots managed with different soil tillage systems, including harrow, chisel plow, moldboard plow, no tillage, disk plow and revolving hoe. One plot was planted exclusively with guinea grass (Panicum maximum) to serve as a reference for minimum loss of soil and another grown on a downhill direction to correspond to the expected maximum erosion. There were differences in sediment loss, nutrient loss and productivity of the popcorn maize in the period analyzed. The chisel plow and no tillage treatments caused the slightest loss of soil and nutrients, compared to other tillage systems. The results show that the soil management systems influenced the physical and chemical characteristics of soil, allowing an economical and environmental recovery of the area, providing the conditions for grain agricultural production.

Espacialização das estimativas de contaminação de águas subterrâneas por Tebuthiuron

Improper use of pesticides can lead to significant environmental impacts such as, contamination of environmental compartments, being the aquatic compartments the most vulnerable. In this context, the spatialization of pesticides concentrations estimative in groundwater provides important insights for decision making in managing and monitoring pesticides use. This study aimed to spatialize estimatives of groundwater contamination by Tebuthiuron, from different irrigation depths in the Rio Pardo basin, Pardinho-SP, Brazil. The simulations were performed using the ARAquá computer system, considering 0mm, 200 mm and 400 mm annual irrigation depths. Geostatistical techniques were used to obtain the spatial distribution of the simulated estimative. Tebuthiuron maps estimating concentration in groundwater were obtained by Kriging interpolation method, and indicated the areas with high potential for groundwater contamination. Considering all the simulations, it was concluded that there was no risk of groundwater contamination by Tebuthiuron in the study area.

Uso do solo e monitoramento dos recursos hídricos no córrego do Ipê, Ilha Solteira, SP

Brazil has great potential of water resources, however, with deficiency in terms of qualitative and quantitative monitoring and knowledge of the influences of land use. So, this study had the purpose of presenting the qualitative and quantitative monitoring of water for irrigation and the influences caused by the use and occupation of land in the watershed of Ipê stream, in the municipality of Ilha Solteira, São Paulo. The qualitative monitoring was conducted from 2006 to 2011 and the quantitative monitoring from 2009 to 2011. In order to evaluate the influences, the Pearson correlation analysis was used. It was found that the watershed is mostly made up by the crop of sugar cane and the use in conflict with areas of permanent preservation are the fallow areas and pasture. The watershed is characterized with high concentrations of iron and coliforms, originating from degraded pastures and irregular use of urban and rural occupation. The small permanent preservation areas, bad soil conservation and expansion of urban areas imply in the deterioration of the quality and availability of water, generating socio-economic and environmental impact in the area.

Pre-harvest sugarcane burning: Determination of emission factors through laboratory measurements

Sugarcane is an important crop for the Brazilian economy and roughly 50% of its production is used to produce ethanol. However, the common practice of pre-harvest burning of sugarcane straw emits particulate material, greenhouse gases, and tropospheric ozone precursors to the atmosphere. Even with policies to eliminate the practice of pre-harvest sugarcane burning in the near future, there is still significant environmental damage. Thus, the generation of reliable inventories of emissions due to this activity is crucial in order to assess their environmental impact. Nevertheless, the official Brazilian emissions inventory does not presently include the contribution from pre-harvest sugarcane burning. In this context, this work aims to determine sugarcane straw burning emission factors for some trace gases and particulate material smaller than 2.5μm in the laboratory. Excess mixing ratios for CO2, CO, NOX, UHC (unburned hydrocarbons), and PM2.5 were measured, allowing the estimation of their respective emission factors. Average estimated values for emission factors (g kg-1 of burned dry biomass) were 1,303 ± 218 for CO2, 65 ± 14 for CO, 1.5 ± 0.4 for NOX, 16 ± 6 for UHC, and 2.6 ± 1.6 for PM2.5. These emission factors can be used to generate more realistic emission inventories and therefore improve the results of air quality models. © 2012 by the authors; licensee MDPI, Basel, Switzerland.