Monitoramento do processo de densificação de compósitos termoestruturais de carbono reforçado com fibras de carbono por tomografia computadorizada e resistividade elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos geoelétricos aplicados no estudo de uma ocorrência de manganês no município de Careaçu - MG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da interação intermolecular em blendas biocombustíveis/petrodiesel do sistema biodiesel-diesel-álcool etílico via propriedades de excesso, espectroscopia de infravermelho e impedância

Pós-graduação em Química - IBILCE

Estudo das reações no sistema 'CU'-'AL'-'AG'-'MN'

Pós-graduação em Química - IQ

Geological and geophysical data integration for delimitation of mineralized areas in a supergene manganese deposits

Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.

Métodos geoelétricos empregados na caracterização e monitoramento de anomalias inerentes à infiltração controlada de vinhaça

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de desempenho do dispositivo de medida de resistividade elétrica em laboratório

Pós-graduação em Engenharia Civil e Ambiental - FEB

Structural, dielectric, ferroelectric and optical properties of PBCT, PBST and PCST complex thin films on LaNiO3 metallic conductive oxide layer coated Si substrates by the CSD technique

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Monitoramento geofísico no aterro controlado do município de Cordeirópolis (SP)

The geophysical methods are widely applied in environmental characterization and monitoring studies. The resistivity method, in particular, has a wide area of applications, being effective in studies of solid waste landfills. The present work propose a geophysical monitoring in the Cordeirópolis city controlled landfill and analyze relationships between variation of electrical resistivity parameter, the residence time of the solid waste in landfill, the rainfall in the region and the organic matter biodegradation processes. The study has no monitoring system to control the products generated in the organic matter decomposition found in waste such as sealing blanket or leachate or gas drains. The results shows that the electrical resistivity parameter was effective in monitoring the landfill contamination plume

Estudo geoelétrico em ocorrência de manganês supergênico no município de Itapira (SP) por meio do método da eletrorresistividade

The geophysical methods are used as tools that, together with other data, assist in target detail and sizing of ore bodies. This paper presents the results of the application of DC resistivity geophysical method on a manganese mineral occurrence located in Itapira, in the northern portion of São Paulo state, hosted predominantly in schists and quartzits of Itapira Group. The integration of geophysical data resulted in the elaboration of electrical resistivity models, where it was possible observe that the mineralized body, composed predominantly of manganese oxides and hydroxides, has a pattern of high resistivity (above 5000 Ω.m) both surface and subsurface. The contrast with the host rock is characterized mainly by different minerals assemblages and by the presence of local groundwater. The results accomplished in this paper reveal that the application of DC resistivity method is valid in primary evaluations of supergene deposits

Simulação de contaminação de sedimentos e águas subterrâneas por gasolina e álcool: um estudo de monitoramento de variações das propriedades físico-químicas

Geophysics studies in areas impacted by petroleum derivatives describe abnormalities of both low and high electrical resistivity (the opposite of electrical conductivity), confirmed as contaminant phase by chemical analysis: this contradiction can be explained by degrading processes that naturally occur and create sub products that can change the environment conductivity. Monitoring the variation of the parameters mentioned serves as a comparative basis to the variation in geoelectrical parameters, which identified the correlation between the same contaminant parameters and the difference between their behavior studied apart, as well as its relations with the biodegradation process. The results are applied to the fuel distribution and storage sectors, leading to the diagnosis and monitoring of possible groundwater contamination scenarios, and the knowledge of the area exposure time to the contaminant, besides the better remediation alternative and impacts control. Among some conclusions, the most significant are the decrease in conductivity over time, so as the increase in Eh value in the gasoline contaminated tank, as well as the decrease in the pH value in the second tank with ethanol, which can be attributed to its degradation. Comparing the variations in both tanks, it is evident that Eh, pH and electrical conductivity do not behave temporally in a similar way, although some correlations between Eh and pH can be related.

Monitoring the process of densification of 3D and 4D (tridirectional and tetradirectional) carbon/carbon composites

Carbon fiber reinforced carbon composites can be made by iterative liquid impregnation or gas phase carbon deposition routes. In both cases, at the final processing stage the carbon fiber is embedded in carbon matrix which results in unique properties such as low density, high thermal conductivity and thermal shock resistance, low thermal expansion and high modulus, in relation to other refractory materials. In the present study assembled three-directional and four-directional preforms, having 50% volume of pores, were densified by iterative cycles of thermoset resin impregnation followed by pyrolysis under inert atmosphere, until appropriate densities were achieved. The thermoset resin is converted in a carbon matrix during pyrolysis. The iterative manufacturing process of the carbon fiber reinforced carbon composites is evaluated by means of nondestructive techniques based on X-ray computed tomography and electrical resistivity. X-ray computed tomography gives a general mapping view of the filling pores of the preforms which impacts results of the electrical resistivity. After six processing cycles and heat treatments up to 2000?, the final densities of the three-directional and four-directional carbon fiber reinforced carbon composites were 1.16g/cm(3) and an electrical resistivity of approximate to 0.07m. The configuration of preforms, three-directional or four-directional, did not alter the densification profile, in terms of increasing density and reducing porosity during the processing cycles.

Plasma Treatment to Improve the Surface Properties of Recycled Post-Consumer PVC

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Al2O3 obtained through resistive evaporation for use as insulating layer in transparent field effect transistor

Alumina thin films have been obtained by resistive evaporation of Al layer, followed by thermal oxidation achieved by annealing in appropriate atmosphere (air or O-2-rich), with variation of annealing time and temperature. Optical and structural properties of the investigated films reveal that the temperature of 550 degrees C is responsible for fair oxidation. Results of surface electrical resistivity, Raman and infrared spectroscopies are in good agreement with this finding. X-ray and Raman data also suggest the crystallization of Si nuclei at glass substrate-alumina interface, which would come from the soda-lime glass used as substrate. The main goal in this work is the deposition of alumina on top of SnO2 to build a transparent field-effect transistor. Some microscopy results of the assembled SnO2/Al2O3 heterostructure are also shown.

Experimentos com frenagem eletromagnética

In this work we study the behavior of the falling motion of neodymium magnets, inside conductive a metallic duct made of copper, aluminum, brass and bronze. We obtain, analyze and present results involving relationships between material and dynamical properties of falling neodymium magnets with the mechanical and electrical properties of conductive materials, such as mass, electrical resistivity, electrical conductivity, length and external diameter