Relação entre a fadiga muscular e a mudança da técnica de nado durante um exercício exaustivo no nado crawl

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O Efeito da Manipulação Miofascial sobre o Limiar Doloroso em Atletas Durante Período Competitivo

Introduction: The myofascial pain syndrome (SDM) is one of the most common causes of musculoskeletal pain. One of the possible treatments for SDM is the type of physiotherapy myofascial manipulation. Objective: This study aimed to analyze the effect of manipulative technique with myofascial pain threshold before and after applying the technique in athletes during competition period. Methods: Participated in the study 62 subjects of both genders, aged between 14 and 38 (19.64 + 4.89), who had myofascial pain syndrome, 32 oh the treatment group and 30 divided equally between control group and the placebo group. All were athletes and operated by the Department of Sport and Leisure in the city of Marilia – SP and were in competitive period. The volunteers were evaluated according to their musculoskeletal symptoms to prove the necessity of performing the technique of myofascial manipulation. Confi rmed the need to assess the pressure pain threshold (LDP) using a digital dynamometer. After the measurement, patients underwent treatment or using the technique of myofascial manipulation, or a sliding surface for the placebo or no treatment for the control group followed by the immediate reassessment of the LDP. Results: The results were normalized by Kolmogrov-Smirnov test (KS). Through the ANOVA test found no differences between the initial LDP thresholds between groups. To compare pre and post LDP of the three groups we used the paired t test. Signifi cant difference (p=0.0001) between the values of pain threshold before and after application of myofascial manipulation for the treated group and not signifi cant for the control group (p=0.45) and placebo (p=0.16). Conclusion: We conclude then that the myofascial manipulation technique is able to increase pain threshold after micro-musculoskeletal injuries in athletes in competitive period.

Análise e redução de custos e peso em veículo rodoviário de carga reboque linha de eixos

Load transportation in brazilian territory is made difficult by a deficient highway network, result of low maintenance and lack of government supervision. The problem aggravates when we consider the transportation of indivisible loads, mainly because the brazilian highways are not prepared for such task and few companies in Brazil have the necessary equipment suited for this kind of transport. In this dissertation it will be shown the analysis of a specific equipment to transport overweight indivisible loads, called hydraulic modular multi axle trailer. From an existing project (RB.04LE-01), manufactured and homologated in Brazil, it has been studied how the components in this trailer work so it could have been possible to elaborate a new model (RB.04LE-02), with two main objectives: reduction of costs and weight with subsequent increase in the liquid load for roadway transportation. The trailer’s components analyses were made utilizing the theory of fatigue strength of materials and finite element method with the von Misses criteria for a more safety when realizing the calculations

Caracterização e origem da composição química da incrustação e simulação de cenários de perda de energia em setor da rede de abastecimento de água da cidade de Rio Claro - SP

The purpose of this work was the inlay’s characterization from the water supply networks of Rio Claro-SP city; as well analyze the influence of network’s aging in the actual system. To do this, some samples of inlays were collected and made chemistry analysis and X-Ray Diffraction Spectrometry. The history of the source water quality was also analyzed, to make possible to known the origins of the inlays. To evaluate the performance of the network, some different scenarios have been simulated, varying the resistance coefficient of the water supply networks of Rio Claro-SP. The characterization results showed that there are basically oxide and hydroxide of iron (magnetite and goethite) and quartz in the inlays, which are materials of high hardness. The hydraulic simulations indicated that the simulated scenarios had a variation of ~2000% in terms of loss of energy

Metodologia para determinação de volume de detenção em pequenas bacias urbanas: o caso do córrego Wenzel, Rio Claro/SP

With the accelerated urbanization process of Brazil from the 50s, there was a disorderly occupation of spaces and consequent soil sealing. Unlike this growth, the support capacity of urban environments has not evolved in the same way, generating negative environmental impacts to the citizens. Among these impacts are the effects of flooding. In order to minimize the negative effects of extreme precipitation over cities, the government invests in corrective measures, like compensatory techniques on urban drainage, which have as a basic principle the retention and infiltration of the rainfall, dampening the peak flow and runoff. An example of applying these techniques in urban areas are the detention basins, commonly called large pools. The hydraulic design of these structures is dependent of complex data and variables, and projects involving small areas generally use simplified methods for defining the reservoirs volume of the storage (Tassi, 2005). One of these methods is presented in this study, which relates to the percentage of soil sealing to the specific storage volume (m³/ha) in combination by applying the hydrological model of the Rational Method and analyzing regional rainfall and soil occupation over the basin. Within this context, the basin of the Wenzel stream, which is located amidst the urban area of Rio Claro/SP, also presents the problems related to human occupation in its valley. Thus, by the method presented has been adjusted a curve correlating the percentage of impermeable area and the specific volume of a detention basin. For the current situation of Wenzel Basin with 82% of impermeable area, and return period of 10 years, the specific volume is 262.1 m³/ha. The presented method is consistent with the results of other studies in the area, and the expression obtained allows estimating the volume of storage required to match hydrograph pre and post-occupancy. It presents itself as a useful tool in the planning stage of...

Efeitos de uma partida sobre o pico de torque funcional e convencional nos músculos isquiotibiais e quadríceps de jogadores de futebol de salão com e sem desequilíbrio muscular

Introdução – Uma das causas mais prováveis de lesões esportivas está relacionada aos desequilíbrios musculares e a fadiga muscular, que é evidenciada no decorrer de um jogo de futebol, principalmente no final do jogo. Esta pode ser avaliada através da comparação da força de contração máxima antes e após o exercício. A fadiga produzida durante o jogo diminui a força muscular concêntrica e excêntrica de flexores e extensores do joelho podendo aumentar a incidência de lesões. Objetivo - Avaliar o efeito de uma partida sobre o pico de torque funcional e convencional nos músculos isquiotibiais e quadríceps de jogadores de futebol de salão com e sem desequilíbrio muscular. Método – Oito jogadores de futebol de salão do gênero masculino, com idade entre 18 e 24 anos, fizeram três visitas ao laboratório: 1ª foram realizadas a antropometria e adaptação aos equipamentos; 2ª teste máximo no dinamômetro isocinético para determinar a razão do pico de torque funcional e convencional nos músculos isquiotibiais e quadríceps; 3ª idem ao 2ª, após a partida de futebol de salão. Análise estatística – através das médias ± DP dos dados obtidos foi utilizado o teste t para amostras dependentes e o Mann Whitney para comparação do pico de torque antes e após a partida de futebol de salão e para comparação da relação flexor/extensor pré e pós- esforço, respectivamente. Em ambos os testes foram adotado um nível de significância de p < 0,05. Resultados - Não foram encontradas diferenças significantes entre os grupos de atletas com desequilíbrio muscular na perna dominante (GD) e grupo equilíbrio (GE) e para os extensores e flexores do GD e GE nas condições Con60. Através do Mann Whitney foram encontradas diferenças...(Resumo completo, clicar acesso eletrônico abaixo)

Reprodutibilidade do pico de torque do músculo tríceps braquial em nadadores treinados

A natação é um esporte praticado em meio líquido o que a torna muito dependente da técnica do nadador, pelo fato de apresentar maior resistência quando comparado com o meio terrestre. A força muscular, composição corporal e a técnica do nado são alguns fatores determinantes para a melhora do desempenho esportivo do atleta. Sendo assim, a capacidade de gerar força propulsiva e minimizar a resistência ao meio líquido são altamente influenciadoras do desempenho nesta modalidade. Um dos principais músculos utilizados na propulsão da braçada do nado crawl é o tríceps braquial o qual é responsável pela extensão do cotovelo. O nível de força dos membros dominante e não dominante também pode influenciar no desequilíbrio muscular dos nadadores e consequentemente na propulsão do atleta. Sendo assim, o objetivo deste estudo foi analisar a reprodutibilidade de pico de torque (PT) durante as contrações isométrica e isocinética concêntrica em diferentes velocidades do músculo tríceps braquial nos membros dominante e não dominante em nadadores. Participaram do estudo nadadores velocistas e meio fundistas do gênero masculino, com idade entre 18 e 28 anos, com experiência no mínimo de 3 anos na modalidade. Os voluntários foram solicitados a comparecer no laboratório em 3 ocasiões em dias diferentes. Primeiramente para obter as medidas antropométricas (massa, estatura, envergadura e dobras cutâneas) e logo em seguida foi feita a familiarização ao teste isométrico e isocinético no dinamômetro. Nas próximas visitas os atletas realizaram no dinamômetro isocinético, o teste máximo para determinação do PT da contração isométrica e isocinéticas concêntricas em diferentes velocidades. O procedimento foi realizado duas vezes em dias diferentes. O teste para determinação do PT isométrico e isocinético foi realizado de forma aleatória... (Resumo completo, clicar acesso eletrônico abaixo)

Resolução de problema de valor no contorno associado ao projeto de reatores de fluxo disperso empregados no tratamento de efluentes

The objective of this work was to develop a numerical method to solve boundary value problems concerning to the use of dispersion model for describing the hydraulic behavior of chemical or biological reactors employed in the wastewater treatment. The numerical method was implemented in FORTRAN language generating a computational program which was applied to solve cases involving reaction kinetics of both integer and fractional orders. The developed method was able to solve the proposed problems evidencing to be a useful tool that provides more accurate design of wastewater treatment reactors

Influência do alongamento prévio no pico de torque e na taxa de força em exercício de contração isométrica

The objective of this study was to investigate the influence of previous active static stretch on the isometric peak torque (PT) and rate of force development (RFD) measured from different time intervals from the beginning of muscle contraction. Participated of this study 15 male individuals, apparently healthy, with ages between 18 and 25 years, without regular physical activity practice. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Two maximal isometric concentric contractions for knee extensors in isokinetic dynamometer to determine PT and RFD (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. The RFD was considered as the mean slope of the moment-time curve at time intervals of 0-30, 0-50 and 0-100ms relative to the beginning of muscle contraction. It was verified significant reduction for both maximal RFD and PT after the stretching (p < 0.05). At intervals of 0- 30ms, 0-50ms and 0-100ms, the RFD at the conditions with stretching was similar to the RFD without stretching (p > 0.05). At intervals of 0-150ms and 0-200ms, the RFD obtained at the contraction without stretching was significantly higher that that obtained at the contraction with stretching (p < 0.05). It can be concluded that the static stretching, performed with duration of 600 s diminish isometric PT, maximal RFD and RFD measured at late phase (> 100 ms) of muscle contraction.

Efeitos do treinamento isocinético e isométrico sobre a taxa de desenvolvimento de força máxima

The objective of the present study was to compare the effects of a high speed isokinetic training (180°.s-1) and an isometric training (75°) on the maximum rate of force development (RFDmax) measured in the isokinetic and isometric modes. Twenty seven male non active subjects participated of this study (Mean + SD = body mass 78.6 + 14.1 kg; stature 175.1 + 8.9 cm; age 22.6 + 3.8 years). They were randomly divided into three groups: Control (GC); Isokinetic training (GISOC) and; Isometric training (GISOM). The subjects were submitted in different days to the following pre training protocols: 1) Familiarization to the isokinetic dynamometer tests; 2) Five maximum concentric isokinetic contractions of the knee extensors (180°.s-1) to access the maximum concentric torque (TMC) and the concentric RFDmax; 3) Two maximum isometric contractions of the knee extensors (75°) to access the maximum isometric torque (TMI) and the isometric RFDmax. The same tests were repeated after the training period, but without the familiarization session. Eighteen training sessions were performed (3 times per week). The GISOC performed the entire training whit concentric isokinetic contractions whit the speed of 180°.s-1. The GISOM performed the entire training whit isometric contractions whit the angle between the thigh end the leg being 75° (0° = full knee extension). TMI, TMC, concentric RFDmax, isometric RFDmax values of the GC was not different between pre and post training. GISOM increased only the TMI and the GSIOC increased the TMC, concentric RFDmax and isometric RFDmax. Furthermore, the GISOC had a higher percentage increase of the isometric RFDmax than the isokinetic RFDmax. Based on these results, it is possible to conclude that the increase in maximum strength corresponded to the training specificity theory, unlike to the RFDmax. Thus the use of isometric contraction ...(Complete abstract click electronic access below)

Validação dos parâmetros aeróbio e anaeróbio a partir de protocolo não invasivo aplicado ao exercício resistido - supino reto

The purpose of this study was to investigate the validity of critical force test from maximal lactate steady state (MLSS) during resistance test using straight bench press. Five healthy male volunteers aged (22.6 ± 2.88 years), weight (76.3 ± 11.49 kg) e height (182.6 ± 7.54cm), trained in resistance exercise, and performed four diferent test to determine: one maximal effort (1RM), critical force using the critical power model (force vs 1/time limit - 20, 25 and 30% 1RM). The CF was the linear coefficient and the anaerobic impulse capacity (CIA) was the angular. MLSS was determined using loads of 80, 90, 100 and 110% of critical force. Blood lactate samples were abtained at each 300sec between each stage of total 1200sec. Maximal 30s test (M30) was accomplished with load of 25% of body weight in SBP. The results showed that the 1 RM was 79.4 Kgf (± 16.98), CF 10.1N (± 2.25), CIA 1756.82 N.s (± 546.96) and the R² 0.984 (± 0,02). The MLSS occurs at 100% CF load. The lactate concentration at the MLSS was 2.2 mmol/L (± 0.77). Significant correlation was observed between MLSS and CF on SBP (r = 0.88 p = 0.05). In M30 the minimum, mean and peak power were (25.0 ± 4.9, 28.0 ± 4.9, and 30.0 ± 4.6 kgf.rps, respectively). The fatigue index was 18.0% (± 6,8). The M30 was significantly correlated with Ppeak and Pmean (r = 0.98 for both, p = 0.003). The CF means has been validated to predict the resistance training and the CIA show to be a representative anaerobic parameter in straight bench press.

Aplicação de sistema de gestão da qualidade na execução de obras de pavimentação asfáltica, baseado nas diretrizes da ABNT NBR ISO 9001:2008

This work brings to its content proposed deployment of a system of quality management in paving asphalt based on the elaboration of a basic training to meet those entering this area of civil engineering at a technical manual for the implementation of major services running on paving of roads. The training was designed to serve both those entering the field of asphalt paving, synthesizing the complex processes involved in paving services and providing an overview of the steps in implementation thereof, as well as entrants must meet the enterprise user of this system, providing them an idea of the method used by the company designing the paving of roads. The technical manual presented in turn, has 8 (eight) of the main services components of a work of paving, which are: Mobilization and Maintenance of construction site, Regularization and subfloor preparation, execution or sub-base BGS base (graded gravel plain), Execution of sub-base or base BGTC (graded gravel treated with cement), Implementation of subbase or base Macadam hydraulic Priming bituminous waterproofing, asphalt binder Priming and finally the execution flexible pavement - HMA (hot milled asphalt concrete). These services are presented in the form of IT-Education work, this seven items are presented that guide the performance of services, thus providing overall guidelines to perform the services described in it. The development of IT's was based on experiences in day-to-day paving near the theoretical precepts presented in the literature, so the conditions specified in these documents aim to always guide the implementation of services in general, giving the process a versatility major operation, as this work takes into account the dynamics of such services, as well as the variety of their execution according to local conditions and specified in the project. So in general we can say that this ... (Complete abstract click electronic access below)

Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

A influência do alongamento prévio no pico de torque e na taxa de desenvolvimento de força

The objective of this study was to investigate the influence of previous active static stretch on the peak torque (PT) and rate of force development (TDF) during isokinetic concentric contractions at 60 and 180.s-1 in active individuals. Twelve active subjects with ages between 18 and 30 years participated of this study. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Five maximal isokinetic concentric contractions for knee extensors at each angular velocity (60 and 180.s-1) to determine PT and TDF (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. There was no significant modification after the stretch exercises on the PT, angle and time at which the PT was attained, at 60 and 180º.s-1. In the same way, there was no significant modification on the TDF and angle at which the maximal TDF was attained in both angular speeds. In other way, the time to attain maximal TDF (TTDF) at 180º.s-1 was significantly lower after the stretching (Pre - 98.3 ± 27.5 ms and Post - 86.6 ± 30.2 ms). There was significant modification on the torque (60 and 180º.s-1) and time (60º.s-1) at different delta of angle variations, obtained at 60º.s-1 at Control and Post-Stretching conditions. However, there was significant reduction of time after the stretching exercises on delta of angle variations of 90-88º (Pre - 46.6 ± 6.5 ms and Post - 44.1 ± 5.1 ms), 88-85º (Pre - 65.8 ± 7.9 ms and Post - 63.3 ± 4.9 ms) and 85-80º (Pre - 93.3 ± 7.7 ms and Post - 90.0 ± 4.2 ms) at 180º.s-1. With base on these data, it is possible to conclude that PT and TDF do not modify after static stretching, irrespectively on the speed...(Complete abstract click electronic access below)

Equilíbrio muscular e pico de torque após jogo de futsal

Indoor soccer is a modality of sport similar to football, which is accompanying an increasing of the number of participants. With the growth of this sport, increased as well the number of injuries, which has been requiring greater attention and care from the health professionals. AIMS: To investigate the functional balance before and after an indoor soccer game and analyze the maximum force before and after the game, in order to verify if there is a great loss of muscle strength of knee flexors and extensors during the game. METHODS: The study included seven amateur soccer players. The isokinetic evaluation was made using the Biodex 3 isokinetic dynamometer at velocities of 60°/s and 180°/s with five repetitions at each velocity for each leg. Further, the study analyzed the peak torque of each leg at each speed of the extensor muscles and flexor concentric and eccentric. RESULTS: Compared to the peak torque before and after the game, there were no significant differences. At 60°/s in the non-dominant leg, peak torque decreased after the game of the extensor concentric and eccentric. In the dominant leg there was a decrease of peak torque in eccentric flexion at 60°/s and concentric flexion to 180°/s. Comparing the peak torque between dominance, there was any significant differences in speed. However, in eccentric flexion at 60°/s before the match there was a significant difference. The peak torque of the dominant leg showed better results than the non-dominant leg. Regarding the functional balance there was no statistically significant differences between the muscles involved. CONCLUSION: From the results achieved, it is possible to conclude that the peak torque of flexor eccentric decreases depending on the length of the exercise. This muscle is stronger in the dominant leg, comparing to the non-dominant leg