Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

A possible way for increasing the cutting tool life can be achieved by heating the workpiece in order to diminish the shear stress of material and thus decrease the machining forces. In this study, quartz electrical resistances were set around the workpiece for heating it during the turning. In the tests, heat-resistant austenitic alloy steel was used, hardenable by precipitation, mainly used in combustion engine exhaustion valves, among other special applications for industry. The results showed that in the hot machining the cutting tool life can be increased by 340% for the highest cutting speed tested and had a reduction of 205% on workpiece surface roughness, accompanied by a force decrease in relation to conventional turning. In addition, the chips formed in hot turning exhibited a stronger tendency to continuous chip formation indicating less energy spent in material removal process. Microhardness tests performed in the workpieces subsurface layers at 5 m depth revealed slightly higher values in the hot machining than in conventional, showing a tendency toward the formation of compressive residual stress into plastically deformed layer. The hot turning also showed better performance than machining using cutting fluid. Since it is possible to avoid the use of cutting fluid, this machining method can be considered better for the environment and for the human health.

Creative Commons: a convergence model between the ideal of commons and the possibilities of creation in contemporary times, opposed to copyright impediments

The contemporary individual finds on the Internet and especially on the Web facilitating conditions to build a basic infrastructure based on the concept of commons. He also finds favorable conditions which allow him to collaborate and share resources for the creation, use, reuse, access and dissemination of information. However, he also faces obstacles such as Copyright (Law 9610/98 in Brazil). An alternative is Creative Commons which not only allows the elaboration, use and dissemination of information under legal conditions but also function as a facilitator for the development of informational commons. This paper deals with this scenario.

Métodos diagnóstico de Hiperadrenocorticismo canina

The Hyperadrenocorticism is a disease that occur in dogs between mead to old age, is associated with the higher level of glucocorticoid that result in a corporal reaction. To make a diagnostic of this disease is necessary have a good history and physical examination, the principals complains of the proprietary are polyuria, polydipsia and polyphagia, in some times abdominal enlargement and lethargy. In the physical examination is observed this abdominal enlargement, hepatomegaly, alopecia, in some cases pyoderma and difficult respiratory. From this documents is possible determinate the differential diagnostics and with the tests find the diagnostic of the disease that the animal have. The base methods are hemogram, biochemical, urinalysis, radiographs and ultrasonography it’s possible do tomography and magnetic resonance too. There are confirmation methods too, they are very important, because the others not have documents necessary for the final diagnostic. Those are Urine cortisol to creatinine ratio, dexamethasone suppression test with high dose or low dose and ACTH stimulation test. Despite those tests have high sensibility and specificity, they can result in false positive or false negative, this is one of the causes to do the base methods and together make the veterinary doctor find the solution of the diagnostic and do the adequate treatment

Gestão no futebol: os quatro grandes times do estado de São Paulo

This research aims to identify elements that show how management influences and is present in modern Brazilian soccer, the competition and rivalry between the soccer teams, especially in the state of São Paulo, have increased considerably and consequently causing the search for efficiency to advance even more. The research was based on how close a relationship between management and soccer could influence it. Is the management so significant for the outcome of soccer match? The clubs with the best results are always those who apply best management models? Data that enabled the determination of financial indicators was collected from those who are considered the four major clubs in the state of São Paulo (SC Corinthians Paulista, SE Palmeiras, Santos FC and São Paulo FC ). With the data, the indicators and events that occurred with the clubs in the period 2010-2012, it was possible to demonstrate the influence of management in soccer, both good and bad, and see that even with the immediate results that soccer requires, managers should invest in some long-term measures to improve the structure of the clubs they represent

Effect of ultrasonic ecxitation on the ultimate tensili strength of glass ionomer cements after different water storage times

The application of ultrasound waves with a conventional dental ultrasonic scaler on glass ionomer cements surface accelerated initial setting reaction and improved the mechanical properties. Objective: This study evaluated the ultimate tensile strength of glass ionomer cements after ultrasonic excitation and different water storage times. Material and method: Twelve specimens of each material (Fuji IX GP, Ketac Molar Easymix and Vitremer) were prepared, and six of each received a 30-second ultrasound application during initial setting of the cements. After storage of the 24 hours or 30 days, the specimens were sectioned into stick to microtensile testing and the mean ultimate tensile strength values were submitted to Welch’s ANOVA and Tamhane’s test. Result: The results showed that the Vitremer presented the highest mean tensile strength. The chemically set Fuji IX GP presented significantly higher mean tensile strength after 30 days than after 24 hours of storage (p < 0.05). At 24 hours, the ultrasonically set Fuji IX GP presented significantly higher mean tensile strength than their counterparts set under standard conditions (p < 0.05). Conclusion: Treatment with ultrasound increased the tensile strength of Fuji IX GP in the early period of maturation.

Análise estrutural e fadiga em prótese implanto-suportada unitária através do método dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quantum Discord for d circle times 2 Systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Andropogon grass consortium with stylo in two times: the forage response and sources of phosphorus rates

The use of legumes intercropped with forage in the Brazilian savannah (Cerrado) region is an alternative to reverse the process of pasture degradation. The natural phosphorus deficiency in this region and the high retention capacity of this nutrient in the soil are factors that directly affect the sustainability of the production system. The objective of this study was to evaluate the effect of a phosphate with medium solubility (Arad) compared to more soluble sources such as triple superphosphate and mono-ammonium phosphate, on the formation and maintenance of pastures of Andropogon gayanus with or without the introduction of Stylosantes guianensis in pasture already established in the Brazilian savannah. Two experiments were carried out under field conditions in an Oxisol using a randomized block design with split plots, plots with two sources of phosphorus (Arad and super-triple or MAP) and subplots with different levels of phosphorus. The study showed that andropogon grass, even though characterised as forage requiring low fertilization, responded to increased fertilization, especially with the use of more soluble sources of P at planting. From the second year on, with the introduction of Stylosantes guianensis, verified effects were seen on legumes in their efficiency of utilization of residual fertilization from the first year; however, this didn't affect legume dry matter production resulting from the P sources used for the andropogon grass. The mixed stands of andropogon grass and Stylosantes guianensis made it more advantageous to increase the P sources using phosphate fertilizer with lower solubility (Arad), when compared to MAP.

Sapindaceae do noroeste paulista: lista de espécies e chave de identificação baseada em caracteres vegetativos

The species identification is usually an obstacle for conservation studies and management. Sapindaceae species are particularly difficult to identify partially due to inconsistent fruit production which is an important feature in defining genera and species. Because of this difficulty of finding fertile material at particular times of the year, the main focus of this study was to identify species of Sapindaceae in northwestern São Paulo and to produce an identification key based on vegetative morphology such as the form and number of leaflets, the number of vascular cylinders in branches to the species of liana, the presence or absence of domatia, and type of indumentum, among others. In this study, researchers identified species of Sapindaceae present in 18 fragments of native vegetation in the region that includes the Turvo Grande, São José dos Dourados, parts of the Low Pardo, Low Tietê and Tietê-Batalha Hydric Resources Management Unit (UGHRIs). An identification key was developed based on herbarium materials and contained 23 species distributed in 11 genera.

Influence of storage times on bond strength of resin cements to root canal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preanesthetic assessment data do not influence the time for tracheal intubation with Airtraq (TM) video laryngoscope in obese patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modulation of thyroid hormone receptors, TR alpha and TR beta, by using different doses of triiodothyronine (T3) at different times

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

New fermions and a vectorlike third generation in SU(3)(C)circle times SU(3)(L)circle times U(1)(N) models

We study two 3-3-1 models with (i) five (four) charge 2/3 (-1/3) quarks and (ii) four (five) charge 2/3 (-1/3) quarks and a vectorlike third generation. Possibilities beyond these models are also briefly considered.

Evaluation in situ of tag formation in dental enamel submitted to microabrasion technique: effect of two etching times

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fatores de risco para casos repetidos de mastite clínica em vacas leiteiras de alta produção

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)