Impact strength and abrasion resistance of high strength concrete with rice husk ash and rubber tires

The paper discusses the application of High Strength Concrete (HSC) technology for concrete production with the incorporation of Rice Husk Ash (RHA) residues by replacing a bulk of the material caking and rubber tires with partial aggregate volume, assessing their influence on the mechanical properties and durability. For concrete with RHA and rubber, it was possible to reduce the brittleness by increasing the energy absorbing capacity. With respect to abrasion, the RHA and rubber concretes showed lower mass loss than the concrete without residues, indicating that this material is attractive to be used in paving. It is thus hoped that these residues may represent a technological and ecological alternative for the production of concrete in construction works.

Estudo de adobes melhorados com cimento e adição de resíduos de concreto

Pós-graduação em Engenharia Civil - FEIS

Estudo de geopolímeros utilizando cinzas residuais do bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Caracterização dos finos de areia de uma fundição e sua incorporação em argamassa de cimento

Pós-graduação em Engenharia Civil e Ambiental - FEB

Análise da ferramenta LEED para a certificação de edifícios sustentáveis no Brasil

CCurrently there are various systems for the evaluation of environmental impacts of buildings, known as tools of environmental certification. Among these, the tool LEED for New Construction and Major Renovations has been the most widely used and accepted worldwide, in assessing the sustainability of buildings. Therefore, this study aimed to analyze the tool for LEED certification for construction work in Brazil, which ranks fourth in the world ranking records certification of sustainable buildings. It was found in this analysis that the assumptions of this tool are encouraging the use of more sustainable and less impactful on the environment as it promotes the deployment of innovative projects from a technological standpoint, , as well as the valuation of enterprises certified. Also, very significant results obtained in terms of energy efficiency and environmental quality in occupied buildings

Proposição de um checklist de acompanhamento de processos construtivos habitacionais em wood-frame

The need for housing in Brazil is very large, and despite government efforts to address this issue, the housing deficit is too large. When analyzing markets without this problem, it is concluded that one of the factors that influence this model is the construction adopted by Brazilian society that is in masonry. Alternatively, the system can be used in constructive Wood-frame. To apply this system in Brazil, one can say that the workmanship and the materials available to meet the demand would be created in a short period of adjustments and capabilities, but identifies himself as one of the biggest problems the planning and management of works. And one of the tools for solving this problem is to use a checklist of the activities of constructive process, avoiding forgetting or not aware of the activities necessary to complete the project

Autoconstrução

o sonho da maioria das pessoas é ter um lugar para morar. Outras, além isso, desejam acompanhar esse sonho sendo concretizado passo a passo, ou seja, desejam ver seu lar sendo construido de acordo com seus gostos e escolhas ao longo do tempo. Este trabalho é dedicado para esse grupo de pessoas, que podem ser chamados de autoconstrutores

Técnicas construtivas e procedimentos sustentáveis – estudo de caso: edifício na cidade de São Paulo

The environmental problems generated by construction activity have been widely discussed in Brazil, which has begun to incorporate sustainable building techniques in your ventures. Based on these facts, this work focused on addressing the main characteristics of a sustainable building project. Among them are water conservation, energy efficiency in buildings, managing a construction site with little environmental impact and reuse of materials and construction elements. This work, after the presentation of the main characteristics of a sustainable building project, shows a case study about the implementation of environmental certification LEED Gold level in a large building, located in São Paulo - SP, Brazil. With that, we want to produce a research document about the topic of sustainable buildings

Análise de inconformidades em obras recentes

Due to the large number of pathologies in the civil constructions justified to highlight the reasons for problems encountered and subsequently the most appropriate way of implementing procedures for certain services performed in civil construction. The intention here is to explain each of the subjects studied, identify and distinguish the conditions presented in the post delivery of civil constructions from construction X, through research and company documents, and highlight steps of the executives of some services civilians highlighted in this work to minimize, or cancel, future maintenance. Studies will be conducted in a more narrow, focused more specifically in the most happening pathologies in the constructions and how to perform each service to prevent future problems with masonry (non-structural cracks and crevices), waterproofing, window frames and cladding. Thus, this study seeks to protect the building, using material technology and equipment, to allow an increase in the service time of the building,

A nova habitação social: concepções inovadoras aplicadas em ZEIS

Discussions on the production of housing for residents of low income, in Brazil, has come a long, but still no great solutions. Not only a political problem, the issue of housing involves also social and economic issues. From the beginning there was a downward grade of the slum villages more sophisticated more precarious, as if the social scale. And that is what this work will be done. In an attempt to produce forms of housing for low-income population, but not to be a mere product of capitalism, or political propaganda, but to try to reach a real solution to the problem. The project will propose new forms of construction, use of renewable energy, reuse of water and other, besides new forms of construction, the project aims to create a sustainable education to future residents

Verificação do índice SINAPI para orçamento de obras

This work refers a comparison between a government’s index budget and another one which take into account the traditional method, in other words, taking real values practice in market as base. For its achievement will be used the design of a low standard single-family residence, quantifying all the materials needed for its construction with Prices Compositions Table for Budget, provided from the PINI publishing. After that, was made two budgets: one based on the SINAPI index costs, provided from Caixa Econômica Federal and calculated for the Brazilian Institute of Geography and Estatistics; and another based on the costs used in the SESC work in Birigui city, as well as values collected from building material stores in the same city. Finally, with both finalized budgets, will be drawn a direct comparison in order to verifying if the index can be use as parameter for budget calculations for low standard residences

Diagnóstico dos resíduos de construção e demolição: uma contribuição à elaboração e implantação da gestão integrada dos RCD no município de Guaratinguetá – SP

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Durabilidade da argamassa mista de revestimento interno contendo dregs-grits em substituição à areia

This paper concerns about the durability of new material in construction. It is noteworthy the fact that increases increasingly searching for alternative materials that do not depend only of natural resources and at the same time be an alternative for reuse of industrial waste. Since the construction materials have a long life and a high cost of civil works and maintenance, it is crucial to estimate the behavior of a new product. Thus , this work discuss the durability of mixed mortar lining , made with waste from the process Kraft pulp production , known as dregs and grits , in partial replacement of sand. Tests were conducted to simulate conditions as adverse environments of constant heat and fire, with the aim of analyzing the behavior of mortar mixed matched the behavior of standard mortar

Desenvolvimento de tijolos cerâmicos com escória de alto-forno

The construction industry is booming, and the federal government is heavily financially supporting public housing. This scenario is very favorable for the development of construction materials, especially low-cost construction. Thus, this study aims to develop a new class of unfired clay masonry bricks: GGBS stabilized bricks. Studies show that the ground granulated blast furnace slag, a material used as raw material in cement manufacture, can be used together with calcium oxide in soil stabilization for the manufacture of bricks. This study aims to test and identify the best parameters for the manufacture of unfired bricks, adapting its composition to the materials found in Brazil and identify the optimum curing conditions for our climate. So far preliminary studies were done to verify the technical feasibility of the material. Future studies should be done to ascertain the economic feasibility and environmental gains of such material

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru