An evaluation of ocean color model estimates of marine primary productivity in coastal and pelagic regions across the globe

Nearly half of the earth's photosynthetically fixed carbon derives from the oceans. To determine global and region specific rates, we rely on models that estimate marine net primary productivity (NPP) thus it is essential that these models are evaluated to determine their accuracy. Here we assessed the skill of 21 ocean color models by comparing their estimates of depth-integrated NPP to 1156 in situ C-14 measurements encompassing ten marine regions including the Sargasso Sea, pelagic North Atlantic, coastal Northeast Atlantic, Black Sea, Mediterranean Sea, Arabian Sea, subtropical North Pacific, Ross Sea, West Antarctic Peninsula, and the Antarctic Polar Frontal Zone. Average model skill, as determined by root-mean square difference calculations, was lowest in the Black and Mediterranean Seas, highest in the pelagic North Atlantic and the Antarctic Polar Frontal Zone, and intermediate in the other six regions. The maximum fraction of model skill that may be attributable to uncertainties in both the input variables and in situ NPP measurements was nearly 72%. on average, the simplest depth/wavelength integrated models performed no worse than the more complex depth/wavelength resolved models. Ocean color models were not highly challenged in extreme conditions of surface chlorophyll-a and sea surface temperature, nor in high-nitrate low-chlorophyll waters. Water column depth was the primary influence on ocean color model performance such that average skill was significantly higher at depths greater than 250 m, suggesting that ocean color models are more challenged in Case-2 waters (coastal) than in Case-1 (pelagic) waters. Given that in situ chlorophyll-a data was used as input data, algorithm improvement is required to eliminate the poor performance of ocean color NPP models in Case-2 waters that are close to coastlines. Finally, ocean color chlorophyll-a algorithms are challenged by optically complex Case-2 waters, thus using satellite-derived chlorophyll-a to estimate NPP in coastal areas would likely further reduce the skill of ocean color models.

Intellectuals and Japanese Buddhism in Brazil

This study concentrates on the discovery of Japanese Buddhism by Brazilian intellectuals as a group of spiritual practices and as a body of spiritual wisdom. The study has been realized through readings and meetings with Japanese Buddhist monks and/or Japanese immigrants. These intellectuals defend a religious experience based on a universal notion of representations of Japanese Buddhism, which provides them with a non-dualistic philosophical perspective and a unique psychological experience. Through innovative spiritual experiences these intellectuals have broken the tension created within the dispute between secularized science and the Catholic hegemony, both predominant in the intellectual panorama.

New species of Hemiodus (ostariophysi, characiformes, hemiodontidae) from the Rio Tocantins, Brazil, with comments on color patterns and tooth shapes within the species and genus

A new hemiodontid species, Hemiodus tocantinensis, is described from the rio Tocantins, Amazon basin, Brazil. It is most closely related to H. ternezi and H. thayeria based on the presence of a dark longitudinal stripe extending from behind the eye or the opercle to the tip of lower caudal fin lobe but is distinguished by the possession of 51 to 58 perforated lateral line scales and an oblique dark blotch on the dorsal fin extending from its anterior distal portion through the middle basal portion of the fin. The evolution of color patterns and tooth shapes present in the Hemiodus species is commented.

Squeezed gluon vacuum and the global color model of QCD

We discuss how the vacuum model of Celenza and Shakin with a squeezed gluon condensate can explain the existence of an infrared singular gluon propagator frequently used in calculations within the global color model. In particular, it reproduces a recently proposed QCD-motivated model where low energy chiral parameters were computed as a function of a dynamically generated gluon mass. We show how the strength of the confining interaction of this gluon propagator and the value of the physical gluon condensate may be connected.

Differentiation of floral color and odor in two fly pollinated species of Metrodorea (Rutaceae) from Brazil

We investigated if differences in morphological characters in two species of Metrodorea (Rutaceae) from Brazilian semideciduous forests correspond to some pollination divergence. M. nigra and M. stipularis are sympatric species, display a similar floral morphology, are protandrous, self-incompatible, their flower periods overlap, and both are pollinated by flies. M. nigra main pollinators are Pseudoptiloleps nigripoda (Muscidae) and Fannia sp. (Fanniidae); M. stipularis major pollinators are Phaenicia eximia (Calliphoridae), Palpada sp. and Ornidia obesa (Syrphidae). The distinct floral odor (disagreeable in M. nigra and sweet in M. stipularis) and color (brownish violet vs. pale yellow) determine the differences on type and number of floral visitors observed. Several species from semideciduous forests initially considered to be pollinated by diverse insects, present flies as main pollinators, stressing the importance of fly pollination in such habitats.

Color evaporation induced rapidity gaps

We show that soft color rearrangement of final states can account for the appearance of rapidity gaps between jets. In the color evaporation model the probability to form a gap is simply determined by the color multiplicity of the final state. This model has no free parameters and reproduces all data obtained by the ZEUS, H1, DØ, and CDF Collaborations. ©1999 The American Physical Society.

Full-color phosphors from amine-functionalized crosslinked hybrids lacking metal activator ions

Sol-gel derived hybrids that contain OCH2CH2 (polyethylene glycol, PEG) repeat units grafted onto a siliceous backbone by urea, -NHC(=O)NH-, or urethane, -NHC(=O)O-, bridges have been prepared. It is demonstrated that the white light PL of these materials results from an unusual convolution of a longer lived emission that originates in the NH groups of the urea/urethane bridges with shorter lived electron-hole recombinations occurring in the nanometer-sized siliceous domains. The PL efficiencies reported here (maximum quantum yields at room temperature of ≈ 0.20 ± 0.02 at a 400 nm excitation wavelength) are in the same range as those for tetramethoxysilane-formic acid, and APTES-acetic acid, sol-gel derived phosphors. The high quantum yields combined with the possibility of tuning the emission to colors across the chromaticity diagram present a wide range of potential applications for these hybrid materials.

Color evaporation induced rapidity gaps

We show that soft color rearrangement of final states can account for the appearance of rapidity gaps between jets. In the color evaporation model the probability to form a gap is simply determined by the color multiplicity of the final state. This model has no free parameters and reproduces all data obtained by the ZEUS, H1, DØ, and CDF collaborations. © 2001 Elsevier Science B.V. All rights reserved.

Background interference on the color of dental composite materials with different thickness by digital contrast

In this work the color dependence of resin composites with the background color was evaluated. The objective was to measure since what thickness the color of the sample stops being influenced by the color of the background over which the resin is placed and the methodology used in experiment was based in analyzing the contrast of digital images of the sample over a black background. The results shown that since 0.8 mm the images contrast becomes almost constant; it prove that since this thickness the color of resin composite depends on the optical resin properties only. The experiment was repeated under three conditions of luminosity to evaluate the influence of it on the image contrast and the results obtained were identical.

Autoimmunity does not contribute to the highly prevalent glucose metabolism disturbances in a Japanese Brazilian population

The Japanese Brazilian population has one of the highest prevalences of diabetes worldwide. Despite being non-obese according to standard definitions, their body fat distribution is typically central. We investigated whether a subset of these subjects had autoantibodies that would suggest a slowly progressive form of type 1 diabetes. A total of 721 Japanese Brazilians (386 men) in the 30- to 60-year age group underwent clinical examination and laboratory procedures, including a 75-g oral glucose tolerance test and determinations of serum autoantibodies. Antibodies to glutamic acid decarboxylase (GADab) were determined by radioimmunoassay and to thyroglobulin (TGab) and thyroperoxidase (TPOab) by flow-cytometry assays. Mean body mass index was 25.2 ± 3.8 kg/m2, but waist circumference was elevated according to the Asian standards. Diabetes, impaired glucose tolerance, and impaired fasting glycemia were found in 31%, 22%, and 22%, respectively, and 53% of the subjects had metabolic syndrome. Glutamic acid decarboxylase (GADab) was positive in 4.72%, TGab in 9.6%, and TPOab in 10% of the whole sample. When participants were stratified according to the presence of thyroid antibodies, similar frequencies of GADab were found in positive and negative groups. The prevalence rates of glucose metabolism disturbances did not differ between GADab positive and negative groups. Our data did not support the view that autoimmune injury could contribute to the high prevalence of diabetes seen in Japanese Brazilians, and the presence of co-morbidities included in the spectrum of metabolic syndrome favors the classification as type 2 diabetes.

Visual evaluation of color stability after accelerated aging of pigmented and nonpigmented silicones to be used in facial prostheses

Objectives: The objective of this study was to evaluate by a visual method of comparison the color stability of nonpigmented and pigmented facial silicones after accelerated aging. Materials and Methods: Two kinds of silicones were used in this study; one specifically formulated for facial prostheses and the other an acetic silicone for industrial use. Twenty-four trial bodies were made for each silicone. These were divided into colorless and intrinsically pigmented groups: ceramic, make-up, and iron oxide. The groups were submitted to accelerated aging for nonmetallic materials. An initial reading and subsequent readings were made at 163, 351, 692, and 1000 hours using a visual method of comparison. The values were annotated in a spreadsheet by two observers, according to scores elaborated for this study. Results: All groups presented color stability in the visual method. According to the results obtained and analyzed in this study, we can conclude that both silicones, Silastic 732 RTV and Silastic MDX 4-4210, behaved similarly, they can therefore be indicated for use in maxillofacial prosthesis. The time factor of aging influenced negatively, independently of the pigmentation, or lack of it, and of silicones and no group had visually noticeable alterations in any of the accelerated aging time, independently of the addition or not of pigments.

Experimental vaccination against Newcastle disease in Japanese quails (Coturnix coturnix japonica): Clinical and immunological parameters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of hardness and color stability in the soft lining materials after thermocycling and chemical polishing.

The aim of this study was to evaluate the Shore A hardness and color stability of two soft lining materials after thermocycling and when chemical polishing was used or omitted. Two acrylic-based soft lining materials were tested: Coe-Soft and Soft Confort, 14 specimens were made for each material. They were distributed in four groups according to the treatment performed. The specimens were thermocycled (1000 cycles) and half of the group submitted to chemical polishing (methyl methacrylate). Shore A hardness was determined and color stability was calculated by means of Commission International de l'Eclairage Lab uniform color scale using a spectrophotometer, the measurements were made immediately after deflasked, chemical polishing and thermocycling. Analysis of variance (ANOVA) and Tukey's tests were performed at p < 0.01. Color changes (deltaE) were observed after thermocycling in both soft lining materials: Soft Confort (10.60) showed significantly higher values than Coe-Soft (4.57). Coe-Soft (26.42) showed higher Shore A hardness values than Soft Confort (19.42). Chemical polishing did not influence in the color stability of both materials; however, influenced in the hardness values of Coe-Soft.