Long-term effectiveness and treatment timing for bionator therapy

The aim of the present investigation was to provide information about the long-term effects and optimal timing for class-II treatment with the Bionator appliance. Lateral cephalograms of 23 class-II patients treated with the Bionator were analyzed at three time periods: T1, start of treatment; T2, end of Bionator therapy; and T3, long-term observation (after completion of growth). T3 includes a phase with fixed appliances. The treated sample was divided into two groups according to their skeletal maturity as evaluated by the cervical vertebral maturation (CVM) method. The early-treated group (13 subjects) initiated treatment before the peak in mandibular growth, which occurred after completion of Bionator therapy. The late-treated group (10 subjects) received Bionator treatment during the peak. The T1-T2, T2-T3, and T1-T3 changes in the treated groups were compared with changes in control groups of untreated class-II subjects by nonparametric statistics (P < .05). The findings of the present study on Bionator therapy followed by fixed appliances indicate that this treatment protocol is more effective and stable when it is performed during the pubertal growth spurt. Optimal timing to start treatment with the Bionator is when a concavity appears at the lower borders of the second and the third cervical vertebrae (CVMS 11). In the long term, the amount of significant supplementary elongation of the mandible in subjects treated during the pubertal peak is 5.1 mm more than in the controls, and it is associated with a backward direction of condylar growth. Significant increments in mandibular ramus height also were recorded.

Lower intercanine width and gingival margin changes. A retrospective study.

OBJECTIVE: To determine if changes in the lower intercanine widths during orthodontic treatment with fixed appliances result in gingival margin changes around the lower canines and incisors. METHOD: Pre- and post-treatment intra-oral photographs and orthodontic study models of 178 Caucasian adolescents (101 female, 77 male) were used. All subjects were treated with fixed appliances. The subjects had mean ages of 11.41 (SD: 1.83) years and 14.91 (SD: 1.78) years on their initial and final records respectively. The latter were taken 28 days or more after the appliances had been removed. The inclusion criteria were: Angle Class I or Class II malocclusion (with or without transverse and/or vertical discrepancies); nonextraction treatment; less than 4 mm crowding or spacing; fully erupted lower incisors and good periodontal health. The intercanine widths and the positions of the gingival margins relative to the maximum curvatures of the labial surfaces of the lower canines and incisors were measured with digital calipers. RESULTS: A significant association was found between unaltered intercanine widths and coronal migration of the gingival margins (p = 0.045). There were no significant associations between either increased or reduced intercanine widths and changes in the gingival margins. CONCLUSIONS: Following orthodontic treatment coronal migration of the gingival margins around the lower incisors and canines is more likely to be associated with an unaltered intercanine width.

Changes on facial profile in the mixed dentition, from natural growth and induced by Balters' bionator appliance

Objective: The purpose of this study was to evaluate the facial profile changes induced by Balters' bionator appliance in Class II division 1 patients, at mixed dentition stage. Methods: The sample consisted of 28 prepubertal individuals at stages 1 and 2 of skeletal maturation (CVM), which were divided in two groups. The experimental group consisted of 14 individuals (7 boys and 7 girls, initial mean age of 8y12m) which were treated with Balters' bionator appliance for 14.7 months. The effects of treatment were compared to a control group of 14 subjects (7 boys and 7 girls, initial mean age of 8y5m) with Class II malocclusion, division 1, not orthodontically treated, which were followed up for 15.4 months. The statistical analysis was performed using Student's t test, at a significance level of 5%. Results: The results showed that the Balters' bionator appliance promoted a significant increase on the mentolabial angle, in addition to demonstrating a tendency to reduce the facial skeletal convexity, to restrict the maxillary growth and to increase the nasolabial angle and the lower anterior facial height. Conclusion: It can be concluded that the Balters' bionator appliance improved the facial profile of children treated at mixed dentition stage. © 2013 Dental Press Journal of Orthodontics.

Alterações tridimensionais dos arcos dentários de pacientes submetidos à cirurgia ortognática

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo cefalométrico com implantes metálicos das alterações esqueléticas, a longo prazo, após o uso do bionator de Balters

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Previsibilidade das alterações do tecido mole em indivíduos dolicofaciais

Pós-graduação em Ciências Odontológicas - FOAR

Aplicabilidade do diagrama de Andrade como método auxiliar no diagnóstico e planejamento ortodôntico, no estudo comparativo de indivíduos de oclusão normal e má oclusão de classe I de Angle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Transverse maxillary and mandibular growth during and after Bionator therapy: study with metallic implants

INTRODUCTION: This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. OBJECTIVE: The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. METHODS: Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 = before bionator therapy, T2 = after bionator therapy and T3 = 5.74 years after T2. RESULTS: There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. CONCLUSIONS: During the study period only the anterior maxillary area did not show transverse growth.

Estudo da associaçao entre o Padrão face longa, o hábito de respiração bucal e as características intrabucais

Aim: to evaluate the association of the long face pattern and the mouth breathing, correlating them with the intraoral characteristics. Methods: the sample was composed of 60 Caucasian Brazilian descendents patients, divided in two groups according to the subjective of their facial pattern. The patients were clinically evaluated to determine their respiratory pattern and the diagnosed of malocclusion. The lateral teleradiographies were drawn in standard to verification facial cephalometric pattern. Chi-Square analysis evaluated the association between subjective facial pattern and type of breathing; facial pattern subjective and cephalometric facial pattern. It was also the chi-square with yates correction to evaluate the associations between subjective facial pattern, type of breathing and posterior cross bite; facial subjective standard, type of breathing and anterior open bite; facial pattern between subjective, type breathing and type of Angle´s malocclusion. Results: it showed that long face pattern (group 1) was associated with mouth breathing habit and facial cephalometric standard. Moreover, the long-face pattern (group 1) presented that mouth breathing was associated with a posterior crossbite and Angle Class II malocclusion. Conclusion: the long face pattern - evaluated with subjective facial analyses - was associated with mouth breathing. The long face pattern and patients with mouth breathing was associated with a posterior crossbite and Class II Angle's malocclusion.

Efectos de los aparatos propulsores mandibulares fijos en la articulación temporomandibular

Fixed mandibular propulsion appliances are an alternative for the treatment of Class II malocclusion in individuals with mandibular deficiency. Since they are fixed appliances, said devices keep the mandible in an anterior-forced position during rest and during all mandibular functions. When a propulsive appliance is used, the lower jaw is displaced forward and downward. This movement leads to a new position of the condyle, which can, ultimately affect the normal functioning of the temporomandibular joint (TMJ). The aim of this paper was to review effects of fixed mandibular propulsive appliance on TMJ. Inclusion criteria considered studies on animals or humans using TMJ radiography, computed tomography, and magnetic resonance imaging. Studies confirm a favorable relation between condyle and glenoid fossa following treatment with fixed mandibular propulsion appliances.

Longitudinal study on skeletal changes during and after bionator therapy using metallic implants

Aim: To demonstrate the magnitude and direction of skeletal changes in the maxilla and mandible during and after the use of bionator, as well as their rotations. Methods: Partial superimposition on the maxilla and mandible on the metallic implants and total superimposition on the cranial base were performed at three periods, T1 before bionator therapy, T2 after bionator therapy, and T3 5.68 years after T2. Results: There was total clockwise maxillary rotation and counterclockwise mandibular rotation, in the North American technique, throughout the study period, as well as extensive remodeling on the condylar region, especially in vertical direction and on the gonial region in horizontal direction. Conclusions: The total maxillary rotation seemed to be significantly affected by therapy than the mandible. There was a clear change in the direction of condylar remodeling compared to the period of bionator therapy and posterior bionator therapy. Considering the entire study period, it was observed that intra-matrix rotation of the maxilla and mandible masked their total rotation, causing minimum changes in the matrix rotation.

Alterações dentoesqueléticas verticais e horizontais induzidas pelo ativador elástico Aberto de Klammt

The aim of this study was to evaluate the vertical and horizontal dentoskeletal changes induced by the Klammt Open Elastic Activator in the treatment of the Class II Division 1 malocclusion. The sample of 34 children was divided into two groups of 17 subjects each (ten girls, seven boys), matched by age and gender and with an initial mean age of 8.5 years. The data was analyzed using a Student's t-test for intragroup and intergroup comparison. The results showed that the appliance promoted dentoalveolar restriction of the maxilar growth within normal anteroposterior and vertical growth of the maxillary apical base; increment in the vertical displacement the mandibular symphysis associated with normal horizontal growth of the mandible; palatal tipping of the upper incisors; restriction of the anterior migration of the upper molars; greater eruption pattern and normal anterior displacement of the lower incisors and molars. It was concluded that Klammt appliance induce changes that are predominantly horizontal dentoalveolar in upper arch and vertical dentoalveolar in lower arch and vertical skeletal changes in the mandible.

Análise tomográfica da articulação temporomandibular no tratamento com Herbst em adulto jovem

Class II malocclusion features a high prevalence in Brazil, being considered as a routine in orthodontic clinics. A number of appliances are shown in the literature in order to correct Class II malocclusion with mandibular retrusion. Herbst´s fixed functional appliance, idealized by Emil Herbst (1905) and reintroduced, in the 1980´s, by Hans Pancherz is highlighted for maintaining the mandible continuously advanced, showing a shorter active treament time, an immediate esthetic impact on the facial profile, as well as requiring no patient´s commitment. Recent researches indicate the use of this appliance in individuals after pubertal growth surge. The aim of the present study is to show the orthodontics practitioner the option to use this appliance so as to treat Class II in individuals after the growth surge, obtaining satisfactory outcomes and further Class II correction.

Aparelho de Herbst associado a aparelhos fixos: descrição de técnica

This paper aims at describeconstruction and installation sequences of a new design of appliance that allows continuously protraction of the mandible, using the telescopic mechanism of the Herbst appliance. This appliance has the advantage to be easily assembled by the orthodontist, without the necessity of molding and the assistance of a specialized laboratory, as well as the constant permanence in the mouth of the patient for being fixed.

Avaliação das dimensões e relacionamento dos arcos dentários após tratamento com Bionator de Balters

The deficiency of data in the literature took us to evaluate the Bionator of Balters appliance in the alterations of the dimensions and the relationship of the dental archs in children with malocclusion Class II, division 1 of Angle. The experimental group was constituted by 36 pairs cast Caucasians patients, aged between 7 years and 10 months - 11 years and 8 months, being 10 females and 8 males. The Levene´s test showed statistical evidences of likeness among the groups. Statistical analysis was preceded and showed significant alterations (p < 0,005) in the variable indicatives of maxillary first molars' distance, overjet, upper arch total length, upper arch anterior length, right molar relationship, left molar relationship, right canine relationship and left canine relationship. On the other hand, there wasn't significant alteration related to the lower arch and maxillary intercanines distance. The Balters' Bionator appliance had a favorable effect in the improvement of the correction of the malocclusion in Class II (foremost in molars and canines relationship) and transversal increase of the upper arch, mainly in the posterior area of arch.