92 resultados para Aspiração intrafolicular


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The acceptance of biotechnology for the most equine breeders association had a significant effect in the horse industry, gaining popularity around the world, because the increasing on the genetic gain, allowing the use of sub fertile mares and stallions with high genetics value on reproduction. The embryos in vitro production of human and cattle has been used with success, however in vitro embryo production is not efficient in the horse, as oocyte transfer (OT) and intracytoplasmatic sperm injection (ICSI). The oocyte transfer has been used especially in subfertile old mares presenting reproductive pathologies as: endometrite, cervical and uterine adhesions, blocked oviduct, perineal laceration and ovulation failures. During oocyte recovery process, the oocytes must be collected from immature follicles that need be matured in vitro or in vivo matured oocytes from pre-ovulatory follicles through the transvaginal aspiration guided by ultrasound. The recovered oocyte is transferred to a previously inseminated recipient mare, through the flank laparotomy. The intracytoplasmatic sperm injection (ICSI) is a procedure of in vitro fertilization that needs only one sperm that is aspirated and injected inside the oocyte. The oocytes used, can be from mature and immature follicles. Fresh, cooled and frozen semen can be used, because the procedure not requires a functional sperm. The use of Piezo drill resulted in a breakthrough the pellucid zone, allowing the vibration per minute provided in the sperm injection pipette, a major result of cleaved oocytes, due to a better sperm injection in the oocyte. The embryo transfer can be straight inside the oviduct, as also transcervical transferred after embryo culture produced in vitro. In conclusion both procedures (OT and ICSI) are effective to be used on equine assisted reproduction, getting results even lower than expected, but satisfactory from animal genetically superior

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the last years, the embryo in vitro production for every domestic species and mainly for bovine has attained a notorius status. This reproductive biotechnical procedure associate with ultrasound-guided ovum pick up (OPU) has been more and more incorporated and spread in our cattle herds, ranking up Brazil already at the top of the list in number of in vitro embryo produced. Some significant advantages provided, such as the possibility of using the premature or pregnant animals oocytes, without necessarily requiring the use of hormonal treatment, to make it possible to generate pregnancy at a shorter period of time, the rationalization in the use of semen and optimization in the use of sexed semen were determinant factors for OPU/IVP to reach this outstanding position. Nevertheless, right now the possibility of IVP embryo cryopreservation, just now is the biggest impediment for maximizing the use of this biotechnology, due to both lack of efficient methods and low laboratory produced embryo cryotolerance. Nowadays, the most used methods of IVP embryo cryopreservation are: slow freezing and vitrification. Traditionally, slow freezing is still the most used methods for in vivo and in vitro produced embryo cryopreservation. However, more recently vitrification - although still not commercially used in large scale - has been presenting satisfactory results in IVP embryo cryopreservation, according to searches

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the last years Brazil has achieved a leading position in worldwide cattle breeding. This country is consolidating the practice of an intensive and technical level cattle breeding, due to greater emphasis on reproductive efficiency and genetic improvement. The attention given to reproductive efficiency became to enhance the genetic improvement process, by exploiting the full reproductive potential of the animals. The biotechniques applied to reproduction arised to expand the reproductive potential for greater economic return. Are the most important reproductive biotechniques the FTAI and in vivo and in vitro embryo production for embryo transfer. Different hormonal treatments are consolidating to interfere with normal physiology in order to achieve the desired goals. The FTAI works to increase the reproductive rates of cattle through pre-booked artificial insemination in all the females in reproduction, without the need for estrous detection. The in vivo and in vitro embryo production aims to distribute the genetics of males and females genetically improved by transferring their embryos to genetically inferior females. Superovulation treatments designed to prevent the mechanism of dominance, which results in many follicles ovulating simultaneously for in vivo embryo production. To the in vitro embryo production, the technique of ovarian puncture guided by transvaginal ultrasound allows to aspirate a number of quality oocytes. The application of biotech is based on knowledge of the female and ovarian reproductive physiology and knowledge of their acting in different breeds and environments.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Through awareness of new trends of consumption of the population with regard to housing, comfort, entertainment, security and sustainability, it was crafted a work that set out to study and develop the concept of home automation and how it will revolutionize the electrical installation projects and energy savings. A pre-wiring project, taking into account, basically, the installed load, is presented as a basis for comparison. The protocols for communication between intelligent devices in an automation environment, used in the work, are the X-10, LonWorks and UPnP. The home network is studied and divided into subsystems, for a better understanding, which are the lighting, audio, video and multimedia system, security, air conditioning and central vacuum system, and the idea of integrated design and system integrator is introduced, showing the change necessity in the design philosophy of electrical installations. The main means of energy savings in an automated home, such as dimerization, master off and smart meters are presented and, finally, it was concluded that there is a need to structure electrical installation projects more comprehensive with regard to home automation, in order to become more efficient and useful to users

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective: The objective of this paper was to verify if the final irrigation at 17% EDTA, separately or followed by chlorhexidine digluconate at 2% interferes on the apical marginal leakage in root canal overfilling, due to the use of two root canal filling materials (Sealer 26TM or SealapexTM). Methods: Forty lower incisors extracted, with a single root canal, were biomechanically prepared, at 2.0mm beyond the radicular apex, with ProTaper SystemTM, finishing it with the F3 instrument. Irrigation was accomplished with 1.0 mL NaOCl at 2.5% at each change of equipment caliper and, in the end, with 5.0 mL normal saline solution. After achieving this procedure, the foraminal channels was standardized with a file K 25 until its DO appears in the foraminal opening. From this moment, the teeth were subdivided into two groups of 20 specimens each, because of the final irrigation method used: I – irrigation with EDTA at 17% for 3min and II – identical protocol, thus, after EDTA aspiration at17%, it was again irrigated with chlorhexidine digluconate at 2%, also kept intra-canal for 3min. Each group was again sub-divided into two sub-groups (ten teeth each), according to the cement used (Sealer 26TM or SealapexTM), and filled by using a single gutta-percha F1 (ProTaperTM, Universal Filling), in such a manner that it goes 2.0 mm beyond the radicular apex. Soon after that, the teeth were immersed in Rhodamine BTM for 72h, vacuum and after the roots have been bucolingually grooved, the leakages marked were measured with program Image ToolTM. Results and Conclusions: The leakage magnitude was similar among themselves (p > 0.05), except for group Sealapex®, thus the final use with chlorhexidine reduced apical leakage (p < 0.05).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The irrigation of root canals aims to their cleaning and disinfection, improving endodontic treatment success. OBJECTIVE: To investigate the influence of the diameter and type of irrigation needle and the root canal enlargement on the mechanical efficacy of endodontic irrigation. MATERIAL AND METHODS: Twelve human single-rooted mandibular incisors were used. During some instrumentation stages (enlargement by #20, #30, and #40 K file), root canals were filled with radiographic contrast solution mixed to propyleneglycol and zinc oxide. Needles with different diameters and designs were employed: G1 – 23G and lateral opening; G2 – 22G and apical opening; G3 – 30G and lateral opening; G4 – 30G and apical opening. The needles were inserted up to resistance, with 1 mm step-back to avoid root canal obliteration. The irrigation was performed with 2 mL of distilled water. Before and after irrigation/aspiration, teeth were radiographed at bucco-lingual and mesiodistal direction, using a digital radiographic system. Then, root canal areas, before (filled by contrast solution) and after irrigation (remnant of contrast solution), were submitted to image subtraction with Adobe Photoshop CS4 software. Subsequently, the areas were measured by Image Tool 3.0 software, allowing the obtaining of the cleaning percentage for each modality. Data were analysed by using Anova and Tukey's test. The level of significance was set at P < 0.05. RESULTS: For all root canal enlargements, 30G needles (G3 e G4) presented a better cleaning efficacy. In all groups, higher cleaning efficacy percentage was observed at #30 and #40 K file enlargement. CONCLUSION: Regardless their design, thinner needles were more effective; a better cleaning efficacy occurred in more enlarged root canals.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introduction: The irrigation of root canals aims to their cleaning and disinfection, improving endodontic treatment success. Objective: To investigate the influence of the diameter and type of irrigation needle and the root canal enlargement on the mechanical efficacy of endodontic irrigation. Material and methods: Twelve human single-rooted mandibular incisors were used. During some instrumentation stages (enlargement by #20, #30, and #40 K file), root canals were filled with radiographic contrast solution mixed to propyleneglycol and zinc oxide. Needles with different diameters and designs were employed: G1 – 23G and lateral opening; G2 – 22G and apical opening; G3 – 30G and lateral opening; G4 – 30G and apical opening. The needles were inserted up to resistance, with 1 mm step-back to avoid root canal obliteration. The irrigation was performed with 2 mL of distilled water. Before and after irrigation/aspiration, teeth were radiographed at bucco-lingual and mesiodistal direction, using a digital radiographic system. Then, root canal areas, before (filled by contrast solution) and after irrigation (remnant of contrast solution), were submitted to image subtraction with Adobe Photoshop CS4 software. Subsequently, the areas were measured by Image Tool 3.0 software, allowing the obtaining of the cleaning percentage for each modality. Data were analysed by using Anova and Tukey’s test. The level of significance was set at P < 0.05. Results: For all root canal enlargements, 30G needles (G3 e G4) presented a better cleaning efficacy. In all groups, higher cleaning efficacy percentage was observed at #30 and #40 K file enlargement. Conclusion: Regardless their design, thinner needles were more effective; a better cleaning efficacy occurred in more enlarged root canals.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Villiers de l’Isle-Adam (1838-1889) is always remembered and admired for his books: Contes cruels, L’Ève future and Claire Lenoir- which summarize the main worries of the writer, his satire of the triumphant Positivism, his metaphysical theory and his aspiration for the Ideal. He is one of the greatest artisans of the French literature style of the XIX century and, in spite of some individual and particular characteristics, he shares with other writers from his time – Joris-Karl Huysmans, Barbey d’Aurevilly, Leon Bloy, among others – the same sorrow and fury towards Positivism and Mercantilism. Having as a starting point the collection Contes cruels, the purpose of this article is to reveal the author’s writings who, by searching for the Ideal and by taking refuge in art, is able to unite the poet, the ironic and the idealist philosopher. Through his writings, the writer moves away from the world’s mediocrity and can express a mix of revolt, reaction, rebellion and also, his hopes expressed in his beliefs in the “Au-delà” and in the salvation by the Ideal.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this study was to investigate the influence of lineage of oocytes donors on the number and quality of oocytes obtained through ultrasound-guided follicular aspiration in Nellore breed cows derived from two lineages of bulls (Karvadi; K and Taj-Mahal; T). Both maternal (Km and Tm) and paternal (Kp and Tp) lineages, as well as their combinations were investigated. Oocyte aspirations were repeatedly performed with an aspiration interval of 15 days in 56 donor females. Recovered cumulus oocyte-complexes (COCs) were counted, morphologically examined and classified into seven categories (grades from I to VII) according to the number of layers of the cumulus oocyte and cytoplasm appearance. The mean number of oocytes retrieved from donors of lineage Tp-Tm was significantly higher (28.23±1.92, P<0.05) than those obtained from lineages Kp-Tm, Kp-Km, and Tp-Km (21.34±1.32, 21.28±1.73, and 16.72±1.31, respectively). There was no significant difference in the mean number of recovered oocytes between donors of lineages Kp-Km and Kp-Tm, whereas animals of lineage Tp-Km yielded the lowest number of oocytes. Higher mean number of grade III oocytes was recovered from donors of lineage Kp than lineage Tp (10.11±0.66 versus 8.79±0.58, respectively), with more grade III oocytes being obtained in both lineages as compared to the others. Paternal lineage did not influence the quality of recovered oocytes in any other category, but both Kp and Tp yielded a great mean number of oocytes graded as I, II, and III (3.14±0.21; 4.93±0.33, and 10.11±0.66 versus 3.19±0.21, 5.59±0.44, and 8.79±0.58, respectively) than those classified as IV, V, VI, and VII. However, when considering the data from the maternal lineage significantly more oocytes (P<0.05) of grade I, II and III were obtained from Taj-Mahal (11.67 ± 0.67, 5.9±0.42 and 3.64±0.25, respectively) than for lineage Karvadi, with similar results for oocytes of grades IV, V, VI, and VII. Similarly to the paternal lineage, the number of oocytes of grade III was superior (P<0.05) when compared to other categories for both lineages. In conclusion, we demonstrate here a direct influence of lineage of oocyte donor on the production and quality of oocytes obtained through ultrasound-guided follicular aspiration in Nellore cows.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)