Prótese parcial removível obturadora: uma reabilitação oral que devolve o bem estar físico e mental

Maxillofacial deformities may cause awkward and embarrassing bearer. These patients present serious psychological, family and social issues becoming traumatized and complexed. These deformities can have congenital origin, malformations and developmental disorders, or can be caused by pathological mutilation such as necrotizing diseases and surgical oncology, or traumas such as traffic and work accidents.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

Plasma rico em plaquetas (PRP) aplicado na artroplastia total do joelho

Objective: To evaluate the efficacy of platelet-rich plasma regarding healing, pain and hemostasis after total knee arthroplasty, by means of a blinded randomized controlled and blinded clinical study. Methods: Forty patients who were going to undergo implantation of a total knee prosthesis were selected and randomized. In 20 of these patients, platelet-rich plasma was applied before the joint capsule was closed. The hemoglobin (mg/dL) and hematocrit (%) levels were assayed before the operation and 24 and 48hours afterwards. The Womac questionnaire and a verbal pain scale were applied and knee range of motion measurements were made up to the second postoperative month. The statistical analysis compared the results with the aim of determining whether there were any differences between the groups at each of the evaluation times. Results: The hemoglobin (mg/dL) and hematocrit (%) measurements made before the operation and 24 and 48hours afterwards did not show any significant differences between the groups (p > 0.05). The Womac questionnaire and the range of motion measured before the operation and up to the first two months also did not show any statistical differences between the groups (p > 0.05). The pain evaluation using the verbal scale showed that there was an advantage for the group that received platelet-rich plasma, 24hours, 48hours, one week, three weeks and two months after the operation (p < 0.05). Conclusions: In the manner in which the platelet-rich plasma was used, it was not shown to be effective for reducing bleeding or improving knee function after arthroplasty, in comparison with the controls. There was an advantage on the postoperative verbal pain scale.

Purificação parcial e caracterização bioquímica de uma isoforma de β-glicosidase do fungo termofílico Myceliophthora thermophila M.7.7

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retorno à atividade reprodutiva de touro angus após fimose traumática com obliteração parcial da luz prepucial: relato de caso

The main disturbs affecting the genital segment of bulls are balanitis, phimosis and preputial injuries, abscesses or prolapses, resulting in decreased libido or mating ability. One case of traumatic phimosis with partial obliteration of preputial lumen is reported in Aberdeen Angus bull. During anamnesis, it was reported that the animal was unable to expose the penis and presented increased penile and preputial volume of unknown etiology after being submitted to a libido test. During clinical examination, a firm preputial mass of 15 cm in diameter was observed in the middle third of the prepuce and stenosis of preputial lumen was detected approximately 17 cm from the preputial orifice. Reconstructive surgery was the chosen therapy, with amputation of the affected foreskin portion. A skin segment of about 12 cm and affected mucosal portion were removed. Postoperative therapy consisted of dressing with chlorhexidine digluconate based ointment, povidone iodine and topical insect repellent (cypermethrin and carbamyl), systemic antibiotic therapy with benzathine penicillin (30,000 IU / kg, repeated after 48 hours) and anti-inflammatory therapy with flunixin meglumine (2 , 0 mg / kg SID) for three days. After twenty days, semen was collected by massage of the accessory glands. The ejaculate volume was 3 mL, with 200x106 spermatozoa / mL, white color, "suis generis" odor, 88% of motile sperm, 64% of progressively motile sperm and 82% of rapid sperm. Thus, the chosen surgical treatment was effective to correct the pathology and reintroduce the animal into reproductive activity

Fisiologia e bioquímica do tomateiro submetido à irrigação salina parcial do sistema radicular

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Influência da incorporação de nanofibras de poliamida 6 com e sem nanotubos de carbono como reforço de prótese parcial fixa adesiva

The aim of this study was to evaluate the behavior of reinforced composites with polyamide 6 fibers aligned (6000 rpm) and alignment (120 rpm) with or without CNT using the flexural strength test. After preparation of nanofibers aligned nylon 6 (6000 rpm) and alignment (120 rpm) with and without incorporation of nanotube carbon by the method of electrospinning, were performed one control group (n = 10) and 4 experimental groups (n = 40) G1: Control (just resin Charisma - Heraeus Kulzer) ;G2 Resin + N6 aligned (6000 rpm) + CNT; G3:Resin + N6 alignment (120 rpm) + CNT; G4: Resin + aligned ( 6000 rpm) N6. G5: Resin + N6 alignment (120 rpm). The fibers were cut to the dimensions of 0,3 x 15 mm and were applied an adhesive at the surface (Single Bond 2) for 5 min and cured. In the matrix, was added resin in the proximal box (Charisma A2, Heraeus Kulzer) and cured for 40 s. (power 1100 mW / cm²). A first layer of resin and on the resin was deposited. The resin layers specimens were light irradiated with three overlapping exposures delivered. For each resin layer were light irradiated for 40 sec. The samples were tested with a cross-speed of 1 mm / min, and a 50 Kgf at Universal testing machine (EMIC mod.DL2000). The Dunnet test showed that only the nanotube group was significantly different from the control group. The ANOVA two-way indicates that the nanotube factor was statistically significant (p < 0.05) and there is no interaction between factors and orientation nanotube. The presence of nanotube showed lower fracture resistance values for aligned and unaligned groups. The results of this study showed that the orientation of the fibers does not influence the strength of composite resins and the incorporation of nylon nanofibers with carbon nanotubes decreased the fracture resistance values. The presence of the fibers has not been able to improve the strength of the material in any of the...

Produção e caracterização parcial da xilanase produzida por Aspergillus sp

As xilanases são enzimas que hidrolisam as ligações 1,4-β-xilosídicas da xilana e que possuem potencial biotecnológico em vários processos industriais, como na clarificação de sucos e vinhos, na fabricação de pães, na produção de biocombustíveis e no tratamento das polpas celulósicas. Além disso, os produtos de hidrólise da xilana, xilooligossacarídeos, podem ser utilizados como ingredientes prebióticos, ou seja, ingredientes nutricionais não digeríveis que estimulam seletivamente a proliferação e a atividade de bactérias benéficas do cólon. O uso de enzimas microbianas nas indústrias se dá devido às suas diversas vantagens sobre os métodos químicos e à facilidade de obtenção do microrganismo. Assim, os objetivos deste trabalho foram: produzir e caracterizar parcialmente a xilanase de Aspergillus sp isolado de pó de café utilizado, purificar parcialmente a enzima produzida e analisar os produtos de hidrólise da xilana. O Aspergillus sp mostrou-se bom produtor de xilanase quando o pó de sabugo de milho foi utilizado como fonte de carbono e a xilanase produzida apresentou melhor atividade específica quando o período de cultivo foi de 168 horas. Os processos de precipitação de proteínas e diálise promoveram o aumento da atividade específica do extrato. A xilanase de Aspergillus sp apresentou pH e temperatura de máxima atividade semelhantes aos de produzidas por Aspergillus niger isolados de outras fontes. A hidrólise da xilana produziu xilose e xilooligossacarídeos. Além da xilanase, o fungo revelou ser produtor de outras proteínas que podem ser estudadas em pesquisas futuras.

Avaliação da qualidade de vida dos pacientes submetidos a artroplastia total primária do quadril antes e após a cirurgia

Pós-graduação em Saúde Coletiva - FMB

Artroplastia total híbrida nacional em cães Portadores de displasia coxofemoral

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fenologia e efeito da desfolha parcial na produção extemporânea de efeito da desfolha parcial na produção extemporânea da videira, cultivar Cabernet Franc (Vitis vinifera L.), na região de São Roque - SP

Pós-graduação em Agronomia (Horticultura) - FCA