Inverse Modeling of GPS Multipath for Snow Depth Estimation-Part II: Application and Validation

GPS multipath reflectometry (GPS-MR) is a technique that uses geodetic quality GPS receivers to estimate snow depth. The accuracy and precision of GPS-MR retrievals are evaluated at three different sites: grasslands, alpine, and forested. The assessment yields a correlation of 0.98 and an rms error of 6-8 cm for observed snow depths of up to 2.5 m. GPS-MR underestimates in situ snow depth by 10%-15% at these three sites, although the validation methods do not measure the same footprint as GPS-MR.

Satélites estabilizados por rotação e torque de radiação solar direta

The aims of this work are to analyze the direct solar radiation pressure torque (TPRS) in the rotational motion of spin-stabilized artificial satellites, to numerically implement these solutions and to compare the results with real data of the Brazilian Satellite Data Collection – SCD1 and SCD2, supplied by INPE. The mathematical model for this torque is determined for a cylindrical satellite, and the components of this torque are determined in a fixed system in the satellite. An analytical solution for the spin motion equations is proposed, in which TPRSD does not affect the spin velocity of the satellite. Two approaches are adopted in the numerical implementation of the developed theory: the first one considers the proposed theory and the second introduces a variation in the spin velocity based on its real variation. The results obtained indicate that the solar radiation pressure torque has little influence in the right ascension and declination axis of rotation due to the small dimension of the satellite and altitude in which it is found. To better validate the application of the presented theory, the angular deviation of the spin axis and solar aspect angle were also analyzed. The comparison of the results of the approaches conducted with real data show good precision in the theory, which can be applied in the prediction of the rotational motion of the spin-stabilized artificial satellites, when others external torques are considered besides the direct solar radiation pressure torque

Toxicologia reprodutiva de ratos adultos expostos ao 2,3,7,8-Tetraclorodibenzo-P-Dioxina (TCDD) in útero

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise in vitro da proliferação celular e produção de mediadores inflamatórios por células da conjuntiva estimuladas por materiais utilizados na confecção de próteses oculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study of some strategies for disposal of the gnss satellites

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de manobras evasivas com perturbações orbitais

Pós-graduação em Física - FEG

Caracterização espacial e epidemiológica da ocorrência de infecção por agentes de enfermidades transmissíveis em carnívoros selvagens e domésticos de uma área de Mata Atlântica e de floresta artificial no estado do Paraná

Pós-graduação em Medicina Veterinária - FCAV

The use of mechanical aeration and its effects on water mass

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Susceptibility of citrus species to Alternaria alternata, the causal agent of the Alternaria brown spot

Alternaria alternata, the causal agent of Alternaria brown spot (ABS), causes necrosis on leaves, twigs, and fruit, reducing the productivity and quality of fruits. Tangerines and their hybrids are highly susceptible to the disease. Species, hybrids, and cultivars of Citrus from the germplasm bank of the Estacao Experimental de Citricultura de Bebedouro, São Paulo, Brazil, were evaluated in 2004 and 2005 with respect to their resistance to A. alternata, both through natural infection and by inoculation. Detached leaves were also used to demonstrate susceptibility or resistance to the disease. Ten cultivars of Satsumas (Citrus unshiu), and 14 cultivars of Clementine mandarin (C. clementina) did not show any symptoms of the disease in their leaves, either through natural infection or when inoculated in the field. The Burguess SRA-412, Wallent SRA-438, Carvalhais, Ampefy SRA-459, Ananas SRA, and Macaque SRA-426 mandarin hybrids (C. reticulata) did not show symptoms of the disease under natural or artificial infection in the field. Some cultivars of C. deliciosa, C. tangerina, C. erythrosa, and C. temple showed symptoms of the disease, even though no previous record of their susceptibility to Alternaria brown spot had been previously reported. The hybrids Fairchild, Nova, Page, Fortune, and Sunburst were susceptible to the disease. However, Fremont mandarin (a crossing between C. clementina and C. reticulata), Encore (C. nobilis x C. deliciosa), and Fallglo (C. reticulata x C. paradisi) did not show symptoms in field, and few symptoms were verified in detached leaves. These materials are promising for the cultivation of tangerines, and will enable genetic improvement for the development of cultivars resistant to Alternaria brown spot. (c) 2007 Elsevier B.V. All rights reserved.

Design and Analysis of Optical Interconnection Networks for a Dataflow Parallel Computer

This work shows the design, simulation, and analysis of two optical interconnection networks for a Dataflow parallel computer architecture. To verify the optical interconnection network performance on the Dataflow architecture, we have analyzed the load balancing among the processors during the parallel programs executions. The load balancing is a very important parameter because it is directly associated to the dataflow parallelism degree. This article proves that optical interconnection networks designed with simple optical devices can provide efficiently the dataflow requirements of a high performance communication system.

Spin-Stabilized Spacecrafts: Analytical Attitude Propagation Using Magnetic Torques

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cryopreservation effects on domestic cat epididymal versus electroejaculated spermatozoa

Frozen-thawed epididymal spermatozoa have already been successfully used in artificial insemination in the domestic cat, proving to be a valuable resource for the reproduction of felid species, which are threatened with extinction. The aim of this study was to compare the effects of freezing and thawing on domestic cat semen collected by electroejaculation (EL) and from the epididymides (EP) and vasa deferentia. Ten adult cats were anesthetized, electroejaculated and immediately thereafter, orchiectomized. Epididymal spermatozoa were collected through the compression of caudae epididymidis and vasa deferentia. Spermatozoa were frozen-thawed following a single protocol. Sperm motility, sperm progressive status (0-5), plasma membrane integrity and morphology (light and transmission electron microscope) were assessed on two occasions, immediately after collection and after freezing and thawing. There were no significant differences between the electroejaculated and epididymal fresh or frozen-thawed spermatozoa for any of the variables. However, the incidence of acrosome defects after freezing and thawing increased by 19% based on light microscopy, whereas ultrastructural images revealed acrosome damages in most sperm cells. Since these acrosomal changes are known to affect sperm fertilising capacity, further studies are needed to optimize cryopreservation techniques for epididymal as well as electroejaculated domestic cat spermatozoa. (c) 2006 Elsevier B.V. All rights reserved.

Effects of forest fragmentation, anthropogenic edges and fruit colour on the consumption of ornithocoric fruits

We investigated effects of fruit colour (red, black or white), habitat (anthropogenic edges and forest interior) and fragment size on the removal of artificial fruits in semideciduous forests in south-east Brazil. Eight forest fragments ranging from 251 to 36,000 ha were used. We used artificial fruits, which were placed on shrubs between I and 2 m in height and checked after 48 and 96 h for peck marks in the fruits. All three variables affected the probability of consumption of our fruit models. Red and black fruits were statistically more pecked than the white fruits. The probability of fruit consumption was lower in the interior than at the edge and less in small than in large fragments. However, the decrease fruit consumption in small compared with large fragments was more accentuated for red and black fruits than for white fruits. Our results show that habitat reduction and edges affect the chances of a fruit being eaten by birds, which may ultimately affect plant fitness in forest fragments. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Karyotypic diversification and its contribution to the taxonomy of Eleocharis (Cyperaceae) from Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison of accuracy between compression- and injection-molded complete dentures

Statement of problem. A clinically significant incisal pin opening may occur after processing complete dentures if a compression molding technique is used. To recover the proper vertical dimension of occlusion, a time-consuming occlusal adjustment is necessary that often destroys the anatomy of the artificial teeth. A new injection molding process claims to produce dentures that require few, if any, occlusal adjustments in the laboratory after processing.Purpose. This laboratory study compared incisal pin opening, dimensional accuracy, and laboratory working time for dentures fabricated by this new injection system with dentures constructed by the conventional compression molding technique.Material and methods. Two groups of 6 maxillary and 6 mandibular dentures were evaluated as follows: group 1 (control), Lucitone 199, compression molded with a long cure cycle; and group 2, Lucitone 199, injection molded with a long cure. Incisal pin opening was measured with a micrometer immediately after deflasking. A computerized coordinate measuring machine was used to measure dimensional accuracy of 3-dimensional variations in selected positions of artificial teeth in 4 stages of denture fabrication. Analysis of variance (ANOVA) and t tests were performed to compare the groups.Results. A significant difference was found in pin opening between groups (t test). Horizontal dimensional changes evaluated with repeated measures ANOVA revealed no significant differences between groups. However, analysis of vertical dimensional changes disclosed significant differences between the groups. There was no appreciable difference in laboratory working time for flasking and molding denture bases between the injection and compression molding techniques when polymethyl methacrylate resin was used.Conclusion. The injection molding method produced a significantly smaller incisal pin opening over the standard compression molding technique. The injection molding technique, using polymethyl methacrylate, was a more accurate method for processing dentures. There were no appreciable differences in laboratory working time between the injection and compression molding techniques.