Radiant exposure effects on physical properties of methacrylate - and silorane-composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of the Removal Capacity, Tolerance, and Anatomical Adaptation of Different Plant Species to Benzene Contamination

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crystal growth and photoluminescence of europium-doped strontium titanate prepared by a microwave hydrothermal method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Porous silica matrix obtained from pyrex class by hydrothermal treatment: Characterization and nature of the porosity

A novel porous silica matrix has been prepared from Pyrex glass, using hydrothermal treatment under saturated-steam condition. This process makes it possible to obtain, in one step, a silica support formed of a homogeneously distributed and interconnected macropore microstructure. The new matrix contains silanol groups that can be used in reactions of surface modification to provide a hybrid material and a selective macrofiltration membrane, and also it can improve chemical inertness. The porous matrix is noncrystalline as obtained and, after thermal treatment at temperatures higher than 950degreesC, exhibits an X-ray pattern characteristic of alpha-cristobalite and low volume contraction. The present samples were characterized by scanning electron microscopy, mercury intrusion porosimetry, nitrogen adsorption-desorption isotherms, infrared spectroscopy, X-ray powder diffractometry, atomic absorption, and high-resolution solid-state nuclear magnetic resonance. The results present a new way of producing a macroporous silica matrix.

IR-visible upconversion and thermal effects in Pr3+/Yb3+-codoped Ga2O3 : La2S3 chalcogenide glasses

IR-visible upconversion fluorescence spectroscopy and thermal effects in pr(3+)/Yb3+-codoped Ga2O3:La2S3 chalcogenide glasses excited at 1.064 mum is reported. Intense visible upconversion emission in the wavelength region of 480-680 nm peaked around 500, 550, 620 and 660 nm is observed. Upconversion excitation of the Pr3+ excited-state visible emitting levels is achieved by st combination of phonon-assisted absorption, energy-transfer and phonon-assisted excited-state absorption processes. A threefold upconversion emission enhancement induced by thermal effects when the codoped sample was heated in the temperature range of 20-200 degreesC is demonstrated. The thermal-induced enhancement is attributed to a multiphonon-assisted anti-Stokes process which takes place in the excitation of the ytterbium and excited-state absorption of the praseodymium. The thermal effect is modelled by conventional rate equations considering temperature-dependent effective absorption cross-sections for the F-2(7/2)-F-2(5/2) ytterbium transition and (1)G(4)-P-3(0) praseadymium excited-state absorption, and it is shown to agree very well with experimental results. Frequency upconversion in singly Pr3+-doped samples pumped at 836 nm and 1.064 mum in a two-beam configuration is also examined.

Effect of heat-moisture treatment on the structural, physicochemical, and rheological characteristics of arrowroot starch

The effect of heat-moisture treatment on structural, physicochemical, and rheological characteristics of arrowroot starch was investigated. Heat-moisture treatment was performed with starch samples conditioned to 28% moisture at 100℃ for 2, 4, 8, and 16 h. Structural and physicochemical characterization of native and modified starches, as well as rheological assays with gels of native and 4 h modified starches subjected to acid and sterilization stresses were performed. Arrowroot starch had 23.1% of amylose and a CA-type crystalline pattern that changed over the treatment time to A-type. Modified starches had higher pasting temperature and lower peak viscosity while breakdown viscosity practically disappeared, independently of the treatment time. Gelatinization temperature and crystallinity increased, while enthalpy, swelling power, and solubility decreased with the treatment. Gels from modified starches, independently of the stress conditions, were found to have more stable apparent viscosities and higher G' and G″ than gels from native starch. Heat-moisture treatment caused a reorganization of starch chains that increased molecular interactions. This increase resulted in higher paste stability and strengthened gels that showed higher resistance to shearing and heat, even after acid or sterilization conditions. A treatment time of 4 h was enough to deeply changing the physicochemical properties of starch.

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Oxidation of Bovine Albumin by Hypochlorous and Hypobromous Acids: Structural and Functional Alterations

Aims: Hypochlorous (HOCl) and hypobromous (HOBr) acids are among the most powerful oxidants produced by the innate immune cells. Albumin is the predominant protein in most body fluids and is considered the most important antioxidant of blood plasma. Study Design: Oxidation of bovine albumin (BSA) and study of its structural and functional alterations. Place and Duration of Study: Faculty of Science and Faculty of Pharmaceutical Science, University of the State of Sao Paulo UNESP, between June and December 2012. Methodology: BSA was oxidized with excess of HOCl or HOBr and its structural and functional alterations were analyzed by spectroscopic techniques as UV-Vis absorption, intrinsic and synchronous fluorescence, fluorescence quenching, Rayleigh scattering and circular dichroism. Results: Both oxidants were able to deplete the intrinsic fluorescence of BSA, but HOBr was more effective than HOCl. The alterations in the synchronous fluorescence, UV-Vis absorption, and the appearance of a fluorescence band centered at 450 nm confirmed the difference between the oxidants. The oxidation did not induce aggregation of BSA as measured by Rayleigh scattering. The far-UV circular dichroism spectra showed a loss in the helical content and the near-UV-circular dichroism showed an alteration in the tertiary structure; HOBr was the more effective of the oxidants in this case. However, the oxidations did not induce significant alterations in the binding capacity of BSA, which was evaluated using hydrophobic (norfloxacin) and hydrophilic (ascorbic acid) drugs. Conclusion: These results suggest that, although highly susceptible to oxidation, the alterations did not inhibit BSA’s physiological function as a transport protein.

Cr+3 distribution in Al1 and Al2 Sites of alexandrite (BeAl2O4: Cr3+) induced by annealing, investigated by optical spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives

In this research the aim was produce and evaluate a plastic composite using recycled polypropylene (PP) and fibers from sugarcane bagasse residues (SC), without the use of additives. This analysis was based on laboratorial tests for physical and mechanical characterization, according to the standards ASTM D256-00, D638-101 and D570-98 were analyzed: water absorption, thickness swelling, impact resistance, tensile strength and its correspondent deformation. For comparison it was elaborated three different compositions: 100% PP; 80% PP+20%SC; 70%PP+30%SC. The results indicate a positive correlation with the content of fiber and water absorption and thickness swelling. In the tension tests, the composites with fibers increase the value of resistance for physical efforts, bringing advantages as durability and integrity of the material, showing a viability of the composites.

Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene wihtout additives

In this research the aim was produce and evaluate a plastic composite using recycled polypropylene (PP) and fibers from sugarcane bagasse residues (SC), without the use of additives. This analysis was based on laboratorial tests for physical and mechanical characterization, according to the standards ASTM D256-00, D638-101 and D570-98 were analyzed: water absorption, thickness swelling, impact resistance, tensile strength and its correspondent deformation. For comparison it was elaborated three different compositions: 100% PP; 80% PP+20%SC; 70%PP+30%SC. The results indicate a positive correlation with the content of fiber and water absorption and thickness swelling. In the tension tests, the composites with fibers increase the value of resistance for physical efforts, bringing advantages as durability and integrity of the material, showing a viability of the composites.

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Testes convencionais e empregando Micro-CT na avaliação de propriedades físico-químicas de materiais retrobturadores e cimentos endodônticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Boro e nitrogênio na incidência de hastes ocas e no rendimento de brócolis

A incidência de hastes ocas em brócolis (Brassica oleracea L. var. italica Plenck) depende de vários fatores que afetam a absorção e o transporte de B, elemento responsável pelo aparecimento dessa desordem fisiológica. O trabalho avaliou os efeitos de quatro níveis de nitrogênio e dois níveis de boro e da interação entre eles na incidência de hastes ocas e na produção de brócolis. As doses de N (100, 150, 200 e 250 kg ha-1) foram divididas em quatro aplicações iguais aos 15, 30, 45 e 60 dias após o transplante. O boro (0, 4 e 8 kg ha-1) foi aplicado metade no plantio e a outra metade em cobertura aos 45 dias após o transplante. A massa média das inflorescências e a produção total foram diminuídas com a aplicação de B em função do crescimento mais lento das plantas provocado pela toxicidade desse elemento. Contudo, nas áreas não adubadas com B, a porcentagem de plantas com hastes ocas foi, em média, de 44,14%, sendo que a incidência dessa anomalia sofreu drástica redução com a aplicação de B, onde a maior dose (8 kg ha-1) resultou em apenas 4,52% de inflorescências afetadas. Doses de N superiores a 215,4 kg ha-1 aumentaram o número de plantas com hastes ocas somente nas áreas que não receberam B.

Aplicação de zinco via sementes e seu efeito na germinação, nutrição e desenvolvimento inicial do sorgo

O objetivo deste trabalho foi avaliar o efeito da aplicação de zinco em sementes de sorgo (Sorghum bicolor (L.) Moench) na nutrição, na germinação e no desenvolvimento inicial das plantas, em casa de vegetação. Utilizou-se delineamento inteiramente casualizado dos tratamentos, em esquema fatorial 2x5, duas cultivares de sorgo (BR 304 e BR 310) e cinco doses de Zn (0, 3,57, 7,14, 14,28 e 28,56 g de Zn por kg de sementes), com três repetições. Foram avaliadas as variáveis de germinação (tempo médio, média diária e a velocidade), e 28 dias depois da semeadura, determinou-se a massa da matéria seca e os teores de Zn na parte aérea e nas raízes. A aplicação de Zn nas sementes de sorgo não afetou o acúmulo de matéria seca da parte aérea, entretanto, diminuiu a germinação e o acúmulo de matéria seca das raízes e da planta inteira. O Zn aplicado nas sementes de sorgo acumulou-se principalmente nas raízes. A cultivar BR 304 apresentou maior absorção de Zn e acúmulo de matéria seca, em relação à cultivar BR 310.