The potential of novel primers and universal adhesives to bond to zirconia

Objectives: To investigate the adhesive potential of novel zirconia primers and universal adhesives to surface-treated zirconia substrates.Methods: Zirconia bars were manufactured (3.0 mm x 3.0 mm x 9.0 mm) and treated as follows: no treatment (C); air abrasion with 35 mu m alumina particles (S); air abrasion with 30 mu m silica particles using one of two systems (Rocatec or SilJet) and; glazing (G). Groups C and S were subsequentially treated with one of the following primers or adhesives: ZP (Z-Prime Plus), AZ (AZ Primer); MP (Monobond Plus); SU (ScotchBond Universal) and; EA (an Experimental Adhesive). Groups Rocatec and SilJet were silanized prior to cementation. Samples form group G were further etched and silanized. Bars were cemented (Multilink) onto bars of a silicate-based ceramic (3.0 mm x 3.0 mm x 9.0 mm) at 90 degrees angle, thermocycled (2.500 cycles, 5-55 degrees C, 30 s dwell time), and tested in tensile strength test. Failure analysis was performed on fractured specimens to measure the bonding area and crack origin.Results: Specimens from group C did not survive thermocycling, while CMP, CSU and CEA groups survived thermocycling but rendered low values of bond strength. All primers presented a better bond performance after air abrasion with Al2O3 particles. SilJet was similar to Rocatec, both presenting the best bond strength results, along with SMP, SSU and CEA. G promoted intermediate bond strength values. Failure mode was predominately adhesive on zirconia surface combined to cohesive of the luting agent.Conclusions: Universal adhesives (MP, SU, EA) may be a considerable alternative for bonding to zirconia, but air abrasion is still previously required. Air abrasion with silica particles followed by silane application also presented high bond strength values. (C) 2013 Elsevier Ltd. All rights reserved.

Translation and cultural adaptation of Brazilian Detailed Assessment of Speed of Handwriting: conceptual and semantic equivalence

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Universal or provincial? early reception of brian friel´s philadelphia, here I come!

This article, part of a larger research work that resulted in a Professorship Thesis, presents a survey and evaluation of the early reception of one of Brian Friel’s first plays: Philadelphia, Here I Come! (1964). The article also explores the question of emigration from Ireland in the 1950s and 1960s, considering British legislation on the matter, and comments on the eventual influence such issue, among other factors, may have had on criticism about the performance of the play at the time.

Sistema adesivo universal: influência da técnica de condicionamento e da pressão pulpar com soro fetal bovino ou água deionizada na resistência de união à dentina humana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A característica universal de Leibniz: contextos, trajetórias e implicações

Pós-graduação em Educação Matemática - IGCE

Can Application of Universal Primers Alone Be a Substitute for Airborne-Particle Abrasion to Improve Adhesion of Resin Cement to Zirconia?

Purpose: To determine whether universal primers alone can deliver similar levels of adhesion of resin cement to zirconia ceramic when compared to their application in conjunction with airborne-particle abrasion.Materials and Methods: Sintered zirconia blocks (N = 160) (Lava, 3M ESPE), (5.25 x 5.25 x 3 mm(3)) were embedded in acrylic resin, polished, and randomly distributed into 16 groups (n = 10 per group), according to the factors "universal primer" (8 levels) and "air-particle abrasion" (2 levels): 1. ctr: control, without application of a universal primer; 2. AP: Alloy Primer; 3. MP: Monobond Plus; 4. MZP: Metal Zirconia Primer; 5. MZ: MZ Primer; 6. Sg: Signum Zirconia Bond; 7. SbU: Singlebond Universal; 8. ZP: Z Prime Plus. The universal primers were also used after air abrasion (A) of zirconia to form the following 8 groups: Ctr-A, AP-A, MP-A, MZP-A, MZ-A, Sg-A, SbU-A, and ZP-A. After ultrasonic cleaning, air abrasion was performed using Al2O3 particles (110 mu m, 2.5 bar, 20 s at 10 mm) in a chairside air-abrasion device. After ultrasonic cleaning again, universal primers were applied according to each manufacturer's recommendation. The resin cement (RelyX ARC, 3M ESPE) was built up incrementally and photo-polymerized on the zirconia surface using a silicone mold (empty set = 3.5, height = 3 mm). All specimens were stored in distilled water (60 days at 37 degrees C) and then subjected to shear bond strength testing (SBS) in a universal testing machine (1 mm/min). On a separate set of zirconia specimens, contact angle measurements were made using the sessile drop technique with a goniometer after the application of universal primers on control and air-abraded zirconia surfaces. Data (MPa) were analyzed using one-way ANOVA, Tukey's test, and Student's t-test (alpha = 0.05).Results: When universal primers were used alone, SbU presented significantly higher mean SBS (19.5 +/- 5.8) that did the other primers (0 to 9.9 +/- 6.6) (p = 0.001). When air abraded, the groups AP-A (14.1 +/- 6.1), MP-A (15.9 +/- 5.4), ZP-A (16.9 +/- 7.3), SG-A (19.1 +/- 2.1), SbU-A (12 +/- 1.5) showed significant differences (p = 0.03). Adhesive performance of all universal primers was enhanced after air abrasion, with the exception of the SbU and MZ primers. After air abrasion, contact angle measurements were lower for the each primer (without air abrasion: 28.9 to 83.9; with air abrasion: 27.1 to 63.0), except for MZP.Conclusion: Air abrasion with 110 mu m Al2O3 followed by universal primer application increased the bond strength of tested resin cement to zirconia, with the exception of SbU and MZ.

Cleaning capacity promoted by motor-driven or manual instrumentation using ProTaper Universal system: Histological analysis

The aim of this study was to assess the cleaning capacity of the Protaper system using motor-driven or manual instrumentation. Materials and Methods: Ten mandibular molars were randomly separated into 2 groups (n = 5) according to the type of instrumentation performed, as follows: Group 1 - instrumentation with rotary nickel-titanium (Ni-Ti) files using ProTaper Universal System (Dentsply/Maillefer); and, Group 2 - instrumentation with Ni-Ti hand files using ProTaper Universal (Dentsply-Maillefer). Afterwards, the teeth were sectioned transversely and submitted to histotechnical processing to obtain histological sections for microscopic evaluation. The images were analyzed by the Corel Photo-Paint X5 program (Corel Corporation) using an integration grid superimposed on the image. Results: Statistical analysis (U-Mann-Whitney - P < 0.05) demonstrated that G1 presented higher cleaning capacity when compared to G2. Conclusions: The rotary technique presented better cleaning results in the apical third of the root canal system when compared to the manual technique.

Resistência de união e estabilidade de um sistema adesivo universal à dentina erodida/abrasionada após desproteinização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A neighbourhood semantic for the Logic TK

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sentimento de culpa na obra freudiana: universal e inconsciente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Religião, política e eleições na Folha Universal

The Folha Universal, newspaper produced by the Igreja Universal do Reino de Deus (Iurd, abbreviation in Portuguese for Universal Church of the Kingdom of God), reaches an average weekly circulation from 2.5 to 3.5 million copies. Studies indicate that the Folha Universal is not merely an institutional newspaper. It is systematically dedicated to be a source of political information to their readers, in order to publicize candidates and politicians who defend the Iurd’s proposals for the Brazilian public life. This paper describes results of an empirical study on the frames built by the Folha Universal about the social demands, economic and political governance considered as priorities to the public management by the Iurd around five themes of analysis: public safety; children and adolescents care; public health; environment; politics and economy. The results indicate that, as characteristics of the Folha Universal in the four months prior to the 2010 Brazilian elections, aspects that differ from those indicated by previous studies on the newspaper. Previously detected in the pages of Folha Universal as a mean for finding solutions to social problems, the theology of prosperity was in our sample replaced by the formulation of public policies.

Design universal e acessibilidade: análise ergonomica de equipamentos de ginástica em espaços públicos

In recent years the availability of equipment for exercise in public places increased demand on the principles of universal design, ergonomics and accessibility, since they are intended for use by many different users. This paper presents an analysis of ergonomic equipment and discusses the main problems observed, as well as projective presents parameters for the development of new products.

Confrontando propriedades lógicas em um contexto de lógica universal

This paper presents a definition of universal logic in a strictly settheoretic environment and compares logical and topological properties in this abstract environment. From these properties, we verify the etymology of the more common names given for evolved properties, and so we establish the precedence or equivalence among them.

A dialética singular-particular-universal: implicações do método materialista dialético para a psicologia

Considering that Cultural-Historical theory has been gaining importance within Brazilian Psychology in the last decades, this essay aims at contributing to understanding its ontological and epistemological foundations, introducing the concepts of singularity, particularity and universality of the dialectics that exists between them. The analysis looks to explore the implications to Psychology, both as a science and as a professional practice, of the lukacsian indication about the need to apprehend the connections between singularity, particularity and universality as a condition for understanding the essence of phenomena. In that sense, this analysis brings light to the individual/society dynamics unity affirmed by historical-dialectical materialism, which contributes to overcoming of the dichotomies usually established between the poles of this relationship.

Avaliação da erosão hídrica por meio da Equação Universal de Perda de Solo Modificada (MEUPS) na bacia hidrográfica do Ribeirão Jacutinga, Rio Claro (SP)

Water erosion is one of the main processes responsible for soil degradation, resulting in loss of parcels of land suitable for agriculture, to the loss of agricultural inputs and the resulting drift of pesticides and excess sediment to rivers, causing phenomena such as the siltation and eutrophication of water bodies. Such a scenario makes it necessary to perform work of a technical and scientific to provide subsidies to land-use planning, in order to protect natural resources biotic and abiotic. To develop this work is necessary to find a unit of analysis capable of integrating the different elements of the landscape, hydrosphere, atmosphere, biosphere and lithosphere. Therefore we adopt for this work the watershed as main unit studies. From this question, this project will focus on the assessment of surface water erosion through MEUPS (Equation Modified Universal Soil Loss) predictive model. With the aid of maps, remote sensing products, and the use of geotechnology, this study aims to evaluate for the for Natural Erosion Potential the basin of the Jacutinga river, located in Rio Claro - SP