Alterações do tecido mole, espaço faríngeo e estabilidade após avanço maxilo-mandibular xom rotação anti-horária e prótese total de ATM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da remoção da margem gengival e do posicionamento do enxerto gengival livre sobre o “creeping attachment”em pré-molares inferiores

Pós-graduação em Odontologia - FOA

Perfil epidemiológico de acidentes com material biológico entre estudantes de medicina em um pronto-socorro cirúrgico

OBJECTIVE: To evaluate the accidents with biological material among medical students interning in a trauma emergency room and identify key related situations, attributed causes and prevention. METHODS: we conducted a study with a quantitative approach. Data were collected through a questionnaire applied via internet, with closed, multiple-choice questions regarding accidents with biological material. The sample comprised 100 students. RESULTS: thirty-two had accidents with biological material. Higher-risk activities were local anesthesia (39.47%), suture (18.42%) and needle recapping (15.79%). The main routes of exposure to biological material were the eyes or mucosa, with 34%, and syringe needle puncture, with 45%. After contamination, only 52% reported the accident to the responsible department. CONCLUSION: The main causes of accidents and routes of exposure found may be attributed to several factors, such as lack of training and failure to use personal protective equipment. Educational and preventive actions are extremely important to reduce the incidence of accidents with biological materials and improve the conduct of post-exposure. It is important to understand the main causes attributed and situations related, so as general and effective measures can be applied.

Assessment of first molars sagittal and rotational position in Class II, division 1 malocclusion

OBJECTIVE: This study assessed the anterior-posterior positioning of the upper and lower first molars, and the degree of rotation of the upper first molars in individuals with Class II, division 1, malocclusion. METHODS: Asymmetry I, an accurate device, was used to assess sixty sets of dental casts from 27 females and 33 males, aged between 12 and 21 years old, with bilateral Class II, division 1. The sagittal position of the molars was determined by positioning the casts onto the device, considering the midpalatal suture as a symmetry reference, and then measuring the distance between the mesial marginal ridge of the most distal molar and the mesial marginal ridge of its counterpart. With regard to the degree of rotation of the upper molar, the distance between landmarks on the mesial marginal ridge was measured. Chi-square test with a 5% significance level was used to verify the variation in molars position. Student's t test at 5% significance was used for statistical analysis. RESULTS: A great number of lower molars mesially positioned was registered, and the comparison between the right and left sides also demonstrated a higher number of mesially positioned molars on the right side of both arches. The average rotation of the molars was found to be 0.76 mm and 0.93 mm for the right and left sides, respectively. CONCLUSION: No statistically significant difference was detected between the mean values of molars mesialization regardless of the side and arch. Molars rotation, measured in millimeters, represented ¼ of Class II.

Efeito do selante de fibrina derivado de peçonha de serpente associado a células-tronco mesenquimais na cicatrização de ferida cirúrgica em ratos

Pós-graduação em Doenças Tropicais - FMB

Estabilidade da fixação antirrotacional lateral com parafuso associada à técnica de avanço de tuberosidade da tíbia

Pós-graduação em Cirurgia Veterinária - FCAV

REPARAÇÃO DE HÉRNIA PERINEAL EM CÃES COM PERITÔNIO DE BOVINO CONSERVADO EM GLICERINA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento geológico, caracterização litoquímica e potencial econômico do corpo de cromitito de Cedrolina, Santa Terezinha de Goiás - GO

Studies of mafic-ultramafic bodies have been carried out through the years due to their great use on the interpretation of geochemical and geotectonic processes that took place in Earth's history. Amongst them, chromitites are notably recognized for being excellent indicators of their parental magma chemistry and of different geotectonic environments, as well for frequently containing associated noble metals mineralization. Thus the investigation of one of this ultramafic bodies that occurs inside the Pilar de Goiás Greenstone Belt was proposed, resulting in a detailed map of the chromitites and country rocks, as well as innumerous new data on the chemistry of chromite and associated matrix and accessory minerals. These studies were based upon geological field observations, optic and Scanning Electron Microscope (SEM), besides electron microprobe and cathodoluminescence analysis performed at the “Eugen F. Stumpfl Laboratory” of the Montanuniversität Institute of Resource Mineralogy, University of Leoben - Leoben, Austria. The chromitites are composed of 40-70% in volume of chromite (~50% on average), 14-55% of talc (~30% on average), 3-60% of chromium rich chlorite (~20% on average), traces to 4% of iron hydroxides and traces to 3% of rutile (1,5% on average). The chromite occurs as large spherical aggregates or as fine grained subhedral crystals disseminated in the matrix. This aggregates have diameters of 0.3-1.5 cm (1 cm on average) and are extremely well rounded, massive to intensively fractured, and commonly deformed to ellipsoids. When observed under the microscope, these aggregates show well rounded to slightly irregular borders, but on their interiors, these structures are represented by fine to medium grained euhedral to subhedral chromite crystals that have sharp contacts between themselves. The rock's matrix is basically made of chlorite and talc that define a metamorphic foliation (Sn), being the talc an alteration product ...

Análise comparativa de três técnicas cirúrgicas como tratamento da luxação coxofemoral

A articulação coxofemoral em cães tem sido, ao longo dos anos, a mais frequentemente lesionada, principalmente de forma traumática, por acidentes automobilísticos ou atropelamentos. O tratamento de escolha para resolver a luxação coxofemoral é o método por redução fechada. Entretanto, na generalidade dos casos, esta técnica não se mostra suficiente para correta estabilização articular, pois há outras afecções envolvidas ou a cronicidade da lesão impede uma manobra efetiva. Sendo assim, recorre-se à cirurgia para correção da luxação. Diversas são as técnicas cirúrgicas praticadas para tal enfermidade. O pino transarticular é um procedimento usado há muito tempo. Essa técnica requer aceitável coaptação articular e é recomendada em casos de grave lesão capsular. Porém, seu uso é discutível por causar lesões degenerativas na articulação ou migração do implante. Dessa forma, a sutura extra-articular vem sendo estudada por apresentar uma estratégia alternativa que não prejudica as estruturas da região operada e por vir demonstrando resultados satisfatórios. Nas situações de luxação recorrente, necrose asséptica da cabeça do fêmur e fraturas de cabeça e colo femoral ou acetabular, a colocefalectomia deve ser empregada. Considerada como técnica de salvamento, esta pode ser utilizada após insucesso dos outros métodos para correção da articulação coxofemoral. Vários estudos foram selecionados para que seus resultados fossem analisados. Assim conclui-se que não existe uma técnica ideal. Todas apresentam adequada congruência articular, porém os implantes metálicos exibem grandes possibilidades de complicação pós-operatória, a sutura extra articular fornece boa estabilidade e poucas lesões locais e a colocefalectomia fica sendo como o último recurso, caso ocorra falha...

Reaproveitamento imediato da ação expansora em um caso de expansão rápida da maxila assistida cirurgicamente

Immediate reutilization of the expanding action in a case of rapid maxillary expansion surgically assisted. The orthopedic rapid maxillary expansion (RME) and rapid maxillary expansion surgically assisted (RMESA) are conducted with the aim of giving an appropriate jaw, capable of providing a normal occlusion. In extreme cases, where there is a severe atresia, it is necessary to perform an expansion beyond that allowed by the expander, followed by another conventional device or a butterfly expander, when the atresia is in the anterior maxillary region. In this situation, there are two options: wait about 90 days to allow intermaxillary suture restructuring and perform a new RME / RMESA or proceed immediately to the expansion process. Considering the biological cost, financial and clinical time, the procedure of reusing the immediate expander action becomes the technique of choice in these cases, been the operational procedure performed simplified and in just four steps. This work will show a case report where, after accomplishing the RMESA was observed that even after changing the shape of the maxillary arch, the severity of atresia could not be corrected, especially in the anterior region, and more expansion was needed. Aiming to correct the atresia in the anterior maxilla, the technique used was to reuse the immediate expander action through the change of an intraoral screw expander for a conventional butterfly type screw expander.

Alterações dimensionais em pacientes submetidos à expansão rápida da maxila com aparelho do tipo Haas

The maxillary atresia is a alteration in the transverse dimension that can result in a unilateral or bilateral crossbite. For correction of atresia of the upper dental arch appliances with the intent to expand the arch of orthopedic or orthodontic manner are used, obtaining across-compatibility between the dental arches. The purpose of this study was to evaluate the dimensional changes of the maxillary in patients in the mixed dentition with atresia in the upper dental arch, using occlusal radiographs taken before, after rapid maxillary expansion and after removal of the appliance. Methods: the sample consisted of 35 patients who used the appliance type conventional Haas, in the mixed dentition, according to the standard protocol for installation, activation, containment and removal of the appliances rapid maxillary expansion. Results: the results confirm that the suture opening occurs in greater quantities in the anterior (4.3 mm) than posterior to (3.74 mm), representing a triangular opening of 7 degrees on average with the posterior opening 87% of the quantity of anterior opening. The molars region expanded about 5 mm, and the base bone 3.7 mm, representing a 74% bone expansion of the expansion teeth.

Treatment and complications of orbito-zygomatic fractures

The aim of the present study was to analyze the etiology, type and treatment employed in the orbito-zygomatic fractures (OZ). Also, postoperative complications are described and correlated with the type of treatment used. Fifty patients with OZ fractures were evaluated. Orbital fractures in which the zygomatic bone was not involved were excluded. Epidemiologic data and characteristics of treatment such as the type of material used for osteosynthesis, number of anatomical sites on which rigid internal fixation (RIF) was applied, surgical approaches and associated complications were recorded. The main causes of trauma were motorcycle and bicycle accidents, constituting 52% of the sample. The osteosynthesis system used was the 2.0 mm, except in four patients in whom the 1.5mm system was used for fixation at the infra-orbital rim. A total of 18% of the patients required reconstruction of the internal orbit and in all cases titanium mesh was used. 46% of the patients received RIF in three anatomical sites, most in the fronto-zygomatic suture, infra-orbital rim and zygomatic-maxillary buttress. The most frequent complication was paresthesia of the infra-orbital nerve (34 patients, 68%). Other findings were also discussed with the intent of better understanding the treatment of the OZ fractures.

Avaliação da espessura do osso parietal como região doadora de enxertos ósseos.

Introduction: The study of graft donor sites, whether from the anatomical, physiological or morphological point of view, has become a topic of current interest, due to the increasing number of patients needing facial bone reconstruction for various reasons. Purpose: In view of the need to constantly improve surgical techniques for autogenous bone graft harvesting, still considered the best choice for facial bone reconstruction, this paper describes an anatomical study on dry skulls in order to evaluate the average thickness of the parietal bone. Material and Methods: Measurements of this bone were taken with a goniometer, at four previously defined points, in the region that is often used as a donor site, in 49 dry skulls (98 parietal bones). The results were evaluated using the T test. Results: Thickness was measured at four predetermined points. The mean values (Point A = 4898mm, B = 4517mm, C = 6185mm, D = 4280mm) show that the bone can be even thinner than previously reported in the literature in other studies of the same nature. The largest bone thickness is in the medial and posterior region. Conclusion: A knowledge of these anatomical characteristics is helpful in preventing possible surgical complications, as well as making it safer for the surgeon to remove this graft and providing more information on whether or not to indicate this region as a bone graft donor site.

Rehabilitacion oral sobre implantes instalados por medio de la tecnica sin colgajo (flapless) y carga inmediata

The oral rehabilitation with osseointegrated implants is a well-documented treatment with high rate of success. Nevertheless, demands related to treatment time and surgical technique began to appear. In this context, the procedure of immediate loading in which the dental prosthesis is placed right after implant surgery has become a constant practice. Although immediate loading has been an important advance, minimally invasive procedures, such as implant placement without raising a mucoperiosteal flap (flapless) are increasingly being performed. Association of immediate loading with the flapless technique improves acceptance by patients and professionals, because no suturing is required. Moreover, it reduces swelling, bleeding during and after surgery, postoperative pain, surgery time, discomfort and hematoma, as well as the need for postoperative medication. These characteristics ease the stages of rehabilitation soon after implant placement, cooperating with prosthodontist's work. Thus, the proposal of this study is to present a clinical case of oral rehabilitation with osseointegrated implants and fixed prosthesis in both arches, in which the flapless technique was applied, followed by immediate loading. It will discuss the diagnosis, prosthetic planning, surgical/prosthodontic procedures and follow-up for 20 months.

Dificuldades relatadas por estudantes de odontologia diante de procedimentos relacionados à periodontia

Objective: This study aimed at evaluating the difficulties reported by last-year dentistry course students regarding basic and surgical periodontal procedures. Methods: A proposed questionnaire with 24 questions, 14 related to basic periodontal procedures and 10 to surgical procedures, was applied to 45 undergraduate students with jobs involving these procedures, during the practical activities of the Integrated Clinic Discipline, a compulsory subject in the curriculum of the course, taught to last-year students. Students were asked about their own perceptions of the difficulties in implementing the various steps related to the treatments. The degree of individual difficulty was determined according to the Likert scale: 0 = none, 1 = mild, 2 = moderate, 3 = high, 4 = very high. Exploratory analysis of data was applied, and the difficulty level was also dichotomized into none to mild (scores 0 and 1) and moderate to very high (scores 2–4). Results: Regarding the basic periodontal treatment, bone level probing was the procedure with the highest number of student difficulties (57.5%). As for the difficulties reported by students regarding the stages of periodontal surgery, only the procedures related to anesthesia and suture removal had no report of doubts. Conclusion: Periodontal surgery was the procedure involving the most prevalent questions reported as moderate to very high, and the indication for the most suitable surgical technique was the stage with the highest percentage of questions (66.6%) among the undergraduates.